In my experience it really depends on the projector.
Older SD projectors tend to have more of the problems you described but first and foremost what you are projecting on can effect how well something looks no matter how good the projector is.
How are you playing it back through the projector?
Are you unable to get any information about the make and model of the HDMI projector?
dave coyle1 wrote:
I wont be able to get to the venue until the screening day so cant even test it first.
As Darby and David have pointed out there are too many moving parts so say with certainty how it will display.
You have to test – even if it's not the same venue, you have to approximate it. (I've gone into strange halls with multiple versions to choose from…just in case.) Do the best you can in replicating the environment of the screening and adjust accordingly.
Thanks guys. All I know is its HD projector. I have the video on a bluray disc so planning on hooking up my bluray player to the projector. The venue has had viewings before so I persume we will be able to kill all the lights and its been projected onto a pull down screen. What I was really asking is are the HD projectors good enough to showcase this kind of work (providing all the other moving parts are ok) will it drain or darken the colours?
What I was really asking is are the HD projectors good enough to showcase this kind of work (providing all the other moving parts are ok) will it drain or darken the colours?
Your missing the point David and Russ have made.
Isnt it interesting that the same image showing on 50 HD TV's in the local shop all look different?
What a camera operator, editor, sound engineer or broadcaster does is send out the best image and sound the complete sytem can offer. Your job is to do the same.
If the sound or picture is bad in the home, the playout engineer cant go to every TV in the country and adjust them.
You might be presented with a portable SVGA projector on a table propped up with a book, or it could be a $75,000 Christie Digital Cinema projector correctly set up using a video analyser by an engineer.
The two things you can do;
talk to the person who looks after the projector, not the venue manager, and find out about the equipment
go into the venue very early on in the day and see and hear for yourself what is going to happen to your project and get the person you spoke with, to adjust it if its obviously not right.