Skip navigation

Airport extreme with Linksys connected and DVR

533 Views 6 Replies Latest reply: Nov 29, 2012 4:30 PM by 544tom RSS
544tom Calculating status...
Currently Being Moderated
Nov 28, 2012 1:43 PM

I have a airport extreme with a linksys router connected and a DVR connected to the Linksys.

I had the DVR and camera working with just the Linksys router, all was setup with portforwarding etc.

I have the two routers working with wifi on both but need to get the DVR working.

How do I set up the Airport and do I need to change anything on the Linksys router?

 

Thanks,

Tom

  • Tesserax Level 8 Level 8 (47,545 points)
    Currently Being Moderated
    Nov 28, 2012 6:28 PM (in response to 544tom)

    Just to make sure I understand your current network configuration is the 802.11n AirPort Extreme Base Station (AEBSn) your main router and you have the Linksys router connected back to it via an Ethernet connection? If this is correct, how do you have the Linksys configured to work with the AEBSn? That is, do you have it reconfigured as a bridge?

  • Tesserax Level 8 Level 8 (47,545 points)
    Currently Being Moderated
    Nov 28, 2012 7:05 PM (in response to 544tom)

    If you didn't make any configuration changes on the Linksys it will still be acting as a router with both its NAT & DHCP service enabled. Typically when you have two or more routers in series you would want to reconfigure the downstream routers as bridges (both NAT & DHCP disabled). This would allow the "main" router to provide these services to network clients regardless of which router they are connected to and allow all clients to be on the same network subnet so that they can "see" each other.

     

    The alternative would be to move the Linksys back to being your main router and reconfiguring the Extreme as a bridge. You can connect the DVR to either as you require. Only the router with NAT enabled needs to be configured for port forwarding.

  • Tesserax Level 8 Level 8 (47,545 points)
    Currently Being Moderated
    Nov 29, 2012 2:44 PM (in response to 544tom)

    If i set the Linksys router to bridge mode, will it still have wifi?

    Yes

     

    Will it be a different ssid?

    You can configure it to use the same SSID as the AirPort or use a completely different SSID. Earlier on before Apple provided simultaneous dual-band versions of the base stations a common way to support 802.11n and non-"n" clients was to operate two different wireless routers with different SSIDs.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.