Skip navigation

Help with guest network settings

231 Views 7 Replies Latest reply: Dec 4, 2012 7:07 PM by Bob Timmons RSS
Walter Starks Level 1 Level 1 (30 points)
Currently Being Moderated
Dec 4, 2012 4:32 PM

I use 2 AEX's (5th Gen) to get better coverage in my house, but I can only setup guest network on the primary AEX. The second one is running in bridge mode and creates dual networks with the same name but doesn't show any options for "Guest Network". I'm guessing that must be because it's in Bridge Mode maybe? Is there a better network configuration that would allow me to have a guest network on both AEX's?

Mac Pro, Mac OS X (10.6.8)
  • Bob Timmons Level 9 Level 9 (75,600 points)
    Currently Being Moderated
    Dec 4, 2012 5:05 PM (in response to Walter Starks)
    I use 2 AEX's (5th Gen) to get better coverage in my house, but I can only setup guest network on the primary AEX

     

    Yes, this is correct because the Guest Network will appear as as option when the AirPort is handling DHCP and NAT services.

     

    The second one is running in bridge mode and creates dual networks with the same name but doesn't show any options for "Guest Network". I'm guessing that must be because it's in Bridge Mode maybe?

    Correct again. It's a "Catch 22". In Bridge Mode, the correct setting for the second AirPort,  DHCP and NAT are disabled, so the Guest Network option will not appear.

     

     

    Is there a better network configuration that would allow me to have a guest network on both AEX's?

     

     

    Unfortunately, no. Another way of saying the same thing is that the Guest Network cannot  be "extended", either using a wireless or Ethernet connection between the AirPort routers.

     

    If you would like to see an option to "extend" the Guest Network, you might want to let Apple know.

     

    Apple - AirPort Extreme - Feedback

  • Bob Timmons Level 9 Level 9 (75,600 points)
    Currently Being Moderated
    Dec 4, 2012 6:27 PM (in response to Walter Starks)

    You would need to configure the AirPort to act as a router.....DHCP and NAT enabled....on a different subnet.

     

    If you have not changed the DHCP range that your "main" network is using, all devices are receiving a 10.0.1.x IP addresses.

     

    So, you would configure the "new" AirPort to use a different DHCP range.....say 10.0.2.x.

     

    This will also create a Double NAT error intitially, which you can click to "ignore" and the indicator light will be green.

     

    Clients on this network will have Internet access, but they not be able to "see" clients or devices on your "main" network, and vice versa. If you want the "guests" to be able to print, you will need to designate a printer for this network.

     

    Post back if you need some help with this.  Hopefully, you are using OS X 10.6.8 as your profile indicates, since this is difficult to do using Lion or Mountain Lion, and pretty straightforward using Snow Leopard or any of the 5.x versions of AirPort Utility.

  • Bob Timmons Level 9 Level 9 (75,600 points)
    Currently Being Moderated
    Dec 4, 2012 6:54 PM (in response to Walter Starks)

    Connect from the WAN port on the "guest" router  to any available LAN <->port on either your other AirPorts, whichever is more convenient.  Post back if you need more details or step by step.

  • Bob Timmons Level 9 Level 9 (75,600 points)
    Currently Being Moderated
    Dec 4, 2012 7:07 PM (in response to Walter Starks)

    Let us know how things are working when you get things set up. 

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.