Currently Being ModeratedDec 6, 2012 11:05 PM (in response to DimitarChukaliev)
It's in mine - are you sure that you're looking at the root level Library and not your user Library?
Currently Being ModeratedDec 7, 2012 4:59 AM (in response to clintonfrombirmingham)
Yep. I I was looking in my user library. I found and erased the files. Unfortunatly this does not solve my problem.
It steel wakes up on AC Attach or AC Detach and it goes in hibernate even its pluged, and I have set it to 0 for when its pluged.
Currently Being ModeratedFeb 12, 2013 6:32 PM (in response to DimitarChukaliev)
Were you able to solve this problem? Same is happening to me, same model MBP. And it's driving me NUTS!!!
Ive read that it was the 2.0 update that started this. Aahh!
Currently Being ModeratedFeb 12, 2013 9:11 PM (in response to sefeing)
Only fix is to reinstall OSX and not install the DL1609 update (i.e. the MacBook Air and MacBook Pro Update 2.0).
Currently Being ModeratedFeb 14, 2013 9:35 PM (in response to SwankPeRFection)
To add to this, I'm still on 12C60 build of OSX 10.8.2. This build doesn't have the autopoweroff glitch that only allows it to hibernate when it's plugged into AC and sleeping, but if I enable my standby mode, whenever the laptop is sleeping/closed and I plug unplug the AC adaptor, it does the same wakeup issue you're seeing. Seems Apple's coded the hardware to wake up when it switches power modes, which is kind of ******** because no other laptop computer that I know of has to do this. Why Apple thinks their needs to just to have to start counting the timeout again before it enters standby and uses no power is beyond me. Their development engineers are kind of stupid sometimes with their decisions. Surely they can update the EFI on the hardware to not do this. If a system is in standby/hibernate (i.e. the mode where it doesn't use any power to maintain the OS image in RAM) then it shouldn't wake up when you connect or disconnect the power adapter.
Look at it this way. If you shut down OSX on the laptop and let it power itself off, when you connect and disconnect the power at that point, the system doesn't power itself back on for any reason. Why then does it do it when the system has entered standby/hibernation?! It shouldn't need to... the RAM image has already been written to non-volatile hard disk memory in an image file. Technically speaking, I can hibernate the system on battery power and unplug the battery from the system. I can then reconnect the battery and wake the system up. OSX will read the image from the hard disk and load it into RAM and off it'll go. This is no different then if you put a Windows system into Hibernation. It doesn't require power to maintain that state because the OS on bootup sees the hibernation file tag and read it back into memory instead of thinking it needs to do a full OS boot from scratch.
Apple makes no sense sometimes.