Skip navigation

Black screen after installing Boot camp Win7 on iMac 27 late 2009

4917 Views 5 Replies Latest reply: Jul 11, 2013 1:17 PM by JLEE1026 RSS
eltoten Level 1 Level 1 (10 points)
Currently Being Moderated
Dec 12, 2012 12:27 PM

I've run out of ideas as to how to fix this problem. I have a late 2009 iMac quad i5, Mountain Lion, 12GB RAM, 1TB HD (recently exchanged under extended warranty).

I stopped counting how many times I have tried to get this up and running but I followed a whole bunch of 'how to's' on the net, including the official Appple guide, but I always end up with a black screen. I insytalled it from scratch using both, Apple drivers on CD and SD card and I can confirn that they installed correctly during my last try. That time I first installed Win Vista, then upgraded to Win 7. I took out the install DVD after first restart and left the SD card in its slot (correctly named, as suggested by Apple). the installation finished, the screen went dark for about 5 min, then the computer rebooted, the screen went dark again for another few min and after that the vomputer restarted again but this time all stayed dark and nothing happened for the better part of an hour.

I also restarted from the Win install disk and tried to remove the ATI drivers using command lines, as suggested in one post.

I need to run Win in Bootcamp because some application I use are very demanding so I need Win to run natively. In an earlier attempt I managed to boot Win7 from the Bootcamp partition in Parallels and I installed the Apple Drivers in that environment but it still resulted in a black screen. I also tried to remove the ATI drivers from Drivers directory manually in MacOS mode but the System wouldn't let me edit the Syustem folder at all, not even in Root user mode.

 

I understand that I'm not the only one with problem and I feel for you, but please refrain from "me too" posts becuase it doesn't really solve my problem. Thank you.

iMac 27'' quad core i5 2.66 Ghz, Mac OS X (10.7), 12GB RAM 1TB HD
  • AutoAym Calculating status...

    I presume that you've followed the instructions for sideloading the iMac Windows drivers into your install via USB stick? (wasn't aware the EFI recognized the SD slot as storage on boot. Now i know)
    I always found more success in just slipstreaming the drivers and install.xml file onto a custom Win7 DVD rather than the USB approach when trying with my Late 2009 27" iMac. The Win7 installer needs that enclosed .xml file in the driver package to tell it where to find the drivers so that they be loaded when the Win7 image extracts itself.

     

    If you're using mountain lion, then you should be receiving the proper Win7 driver set. If you wanted to create a custom image, then you can use an ISO file, the driver package and disk utility to make something you can use. Either that or you learn what edits your install.xml file needs to point the installer properly and check it manually.

     

    I don't know what links you have so i'll just include everything:

     

    Installing boot camp on a Late 2009 iMac:
    http://support.apple.com/kb/TS3173

    Direct link to Late 2009 iMac-specific Windows drivers.

    http://support.apple.com/kb/DL995

     

    I'd try a USB stick and the iMac-specific driver set. It should steer your insolent windows installer correctly.

     

    Hope this helps.

  • AutoAym Level 1 Level 1 (15 points)

    Just so that i'm crystal clear on the problem that you're actually having, you're making it through the Boot Camp procedure successfully right up to the point at which the Win7 install configs have completed, it's rebooted and you're presented with a black screen when the Windows Desktop loads. DId I get this right?

     

    The ATI drivers included in the download pack from the link I included are good, albeit out of date. The trick is to make sure the Windows installer is loading them as the windows install is occurring. It's easy to tell as you're either going to get a black screen when Windows loads or you'll see the Windows Desktop. It's either success or fail. Once you're actually on the windows desktop, then the video drivers can be updated to current relatively easily.

     

    Trying to install the drivers using Paralells won't work because Paralells isn't loading the native windows drivers/devices to run windows that the ATI drivers need to be associated with. Rather, everything needed to run Windows under Paralells is being run on virtualized hardware that Paralells is providing, rather than your iMac itself. The end result is that the drivers would get applied to the virtual hardware coming from paralells, not to the physical video card itself.

     

    Keep me posted.

  • JLEE1026 Calculating status...

    I've also encounter this same issue after getting my 27 iMac HDD replaced. None of the other driver downloads and what nots work. BUT..... here's what I ended up doing and worked perfectly.

     

    1. Attached an external display while system in still in Mac OS and ensure that second display is showing my Mac OS desktop.

    2. Reboot into Win7 OS (iMac display should remain blank).

    3. You should see the final steps for Win7 OS installation on the external monitor.

    4. Complete Win7 OS installation.

    5. Launch Control Panels and go into Device Manager

    6. Locate Display driver and update using the driver you've downloaded from http://support.apple.com/kb/DL995

    7. As soon as the display driver is updated, your beautiful iMac display should now be mirroring what you see on your external display.

    8. Install Bootcamp that came with the iMac (labled iMac Mac OS X Install DVD)

     

    Done

     

    Hope this helps.....

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.