Currently Being ModeratedDec 15, 2012 8:21 PM (in response to danschlack)
How are you viewing the video? Depending on seveal factors play back of the timelin can apper to be jerky, but the final export could be fine.
Are you aware of the Ken Burns effect in FCPX? It could save you some steps in setting up your pans and zooms, the hold at the end could be a freeze frame.
Currently Being ModeratedDec 15, 2012 9:35 PM (in response to danschlack)
Check out www.noiseindustries.com/fxfactory/panandzoom/ This is free.
But getting Motion 5 is a good idea. At $50, it's a great deal.
Currently Being ModeratedDec 16, 2012 9:20 AM (in response to danschlack)
Another vote here for Motion. Much easier to create pans/zooms on stills than FCP, and with greater control it should produce better results. If the only things that Motion did were moves on stills and chroma keying, it would still be worth the price.
Currently Being ModeratedDec 16, 2012 3:30 PM (in response to Michigan One Fly)
Thanks for the advice. I immediately went home and rendered my test project, and, well, no go. I'm aware of he canned Ken Burns, but as with all canned effects, there is a trade off between convenience and flexiblity. I think I'll try downloading a third party plug-in. If I actually buy FCP I'll also buy motion.
Currently Being ModeratedDec 17, 2012 12:41 AM (in response to danschlack)
When you pan and zoom using keyframes, you have to be aware of the settings for the animation path.
Each keyframe can be set to "linear" or "smooth" interpolation. In this case you need "linear".
Take a look at the online manual here: http://help.apple.com/finalcutpro/mac/10.0.6/
You can "print" this manual to pdf using the little printer-like symbol at the top right of the page.
Then open the pdf in Preview and look at page 224.
Currently Being ModeratedDec 17, 2012 6:13 AM (in response to Richard Crain)
I've done so and it does work but I'm not sure I like what FxFactory does to the performance. I have the 13.3 inch Mac Pro with lots of memory but I don't have the Invedia graphics card. FPCX has run somewhat sluggishly. This is a problem with my configuration but on the whole FxFactory looks like a keeper, provided I can't find a native solution.
Thanks for your advice.
Currently Being ModeratedDec 17, 2012 6:14 AM (in response to Luis Sequeira1)
This looks like the native solution I've been seeking. I can't wait to get home and try it out tonight.
Thanks, to you and the whole suppport community.
Currently Being ModeratedDec 17, 2012 2:07 PM (in response to danschlack)
It may not just be a problem with your configuation. Remember that, by default, FxFactory will load every single plug-in they sell so you can try them out in demo mode.
Run the separate FxFactory application (installed with the plug-ins and in your Applications folder) and turn off the stuff you're not interested in.
Currently Being ModeratedDec 17, 2012 6:18 PM (in response to danschlack)
Thanks again for the help, but I think we are talking apples and oranges. I'm trying to do non-default style pan and zoom over a still. The fx I'm working on has 4 keyframes. The first movement pans accross the still as it zooms in on the subject. Then it should be holding at that position a bit. Finally is zooms out to the transition. It gets wobbly in the middle section where it should be holding steady. I think the info in your message relates to tranforming a clip. I'll just work with 3 copies of the slide, that'll work its just a lot of bother.
Currently Being ModeratedDec 17, 2012 6:35 PM (in response to danschlack)
Animate the crop function with four keyframes, not the scale and position parameters.
Currently Being ModeratedDec 17, 2012 6:42 PM (in response to danschlack)
To revisit an earlier suggestion, I'd try Motion. It is your friend if you're going to do very much of this. It does a very nice job on stills. No trials though. You'd have to test it on someone else's computer – like at an Apple Store.
Currently Being ModeratedDec 18, 2012 2:44 AM (in response to danschlack)
If the images fill the screen, then Tom's suggestion to keyframe the crop function is clearly the easiest way to deal with it.
Otherwise, I can confirm that my earlier suggestion to change the interpolation at each keyframe from "smooth" to "linear" avoids the wobbling.
I did a small test by having a picture move horizontally, then stopping for a while at the right edge, and then move down and out of the frame. Like predicted, it moved up before it started down. Changing the interpolation to linear solved the issue.
Currently Being ModeratedDec 18, 2012 5:32 AM (in response to Luis Sequeira1)
This looks good. I struggled with your suggestion last night, much to the chagrin of my wife. I couldn't figure out how to modify this property of a keyframe, even after spending a bunch of time with the user's guide and LYNDA.COM tutorials. This will get another shot when I get home from work and this time its certain to succeed. Your help and the help of the rest of community has been great, it has sealed my decision to purchase FCPX. With that decision made I soon gain the experience to able to offer this level of assistence to others.
Currently Being ModeratedDec 20, 2012 6:25 AM (in response to Luis Sequeira1)
Well, I tried your solution and, well not good. At this point I suspect a deep seated bug that causes this problem to surface when panning at an angle is combined with with zoom. That is, keyframing position changes when both x and y are changing, and scale changes are not 100% compatible. The problem also seems to be cumulative, the more I do on a still the worse the effect. I do not think this will be solved until get off the trial FCPX and get upto speed with Motion5. As soon as I can confirm Motion5's abity to help, I'll make the move otherwise I'm back to the overpriced Adobe products.
All I really want to do is, at times, is pan and zoom, then hold, then pan and zoom a new direction into a cross disolve.