1 14 15 16 17 18 Previous Next 264 Replies Latest reply: Jun 9, 2014 4:18 PM by Diggher Go to original post Branched to a new discussion.
  • 240. Re: Wireless keyboard won't turn on after changing battery
    Ro42 Level 1 Level 1 (0 points)

    I am having the same problem 3 years after buying the keyboard.

    Save it with Alu Foil.

     

    MacBookPro, 17", Mid 2009

  • 241. Re: Wireless keyboard won't turn on after changing battery
    PhilW3995 Level 1 Level 1 (0 points)

    Solution: There's a Gray Plastic part that gets turned around in there.  You have to take the batteries out and Tap the Keyboard on something to make the Plastic part come out enough to turn it around, then carefully put the batteries back in and try it again.

     

    The FLAT part of the Plastic has to be against the battery.  It has a hole in it, therefore the battery will make contact.  If this plastic is turned the wrong way the battery doesn't make contact.

     

    How the heck it gets turned around just by taking the batteries out is a mystery.  I guess it sticks to the battery after a while.

     

    Hope this helps, it certainly worked for me.  There's a lot of post here, so to be clear, this is the fix if you don't get the Green Light (Power) after replacing the Batteries.

     

    PhilW

  • 242. Re: Wireless keyboard won't turn on after changing battery
    Rob M Level 1 Level 1 (15 points)

    Aluminum foil move worked for me on a 2009 model that I thought was toast. Thank god for this forum.

  • 243. Re: Wireless keyboard won't turn on after changing battery
    rdowling75 Level 1 Level 1 (0 points)

    PhilW3995 wrote:

     

    Solution: There's a Gray Plastic part that gets turned around in there.  You have to take the batteries out and Tap the Keyboard on something to make the Plastic part come out enough to turn it around, then carefully put the batteries back in and try it again.

     

    The FLAT part of the Plastic has to be against the battery.  It has a hole in it, therefore the battery will make contact.  If this plastic is turned the wrong way the battery doesn't make contact.

     

    How the heck it gets turned around just by taking the batteries out is a mystery.  I guess it sticks to the battery after a while.

     

    Hope this helps, it certainly worked for me.  There's a lot of post here, so to be clear, this is the fix if you don't get the Green Light (Power) after replacing the Batteries.

     

    PhilW

    Phil hits the nail on the head here. I have two of these keyboards (both are the 3-battery A1255) and one exhibits the issue while the other does not. The one that works flawlessly has the flat face of the grey spacer facing the battery. Unfortunately, this bit is not only capable of fliping around, but getting locked into place facing the wrong direction. I've tried pulling mine out with an automotive pick but can't get it to release from the contact which just moves with it as far as the spring behind it will allow.

     

    I've even gone so far as to disassemble the electonics portion of the keyboard and although I could get everything else out, that darned battery contact assembly looks to be held in (or together) with a circlip. It's well out of reach from the recess where the brains are housed so I'm sure it requires a special tool to remove if it's not held in with a permanent one-way locking mechanism. Unfortunately, it looks like the best solution for me remains a 1.5mm ball of aluminum foil and a strip of scotch tape along the sides of the batteries. (The latter allows you to insert them as a single mass that doesn't bounce the aluminum out of place.)

  • 244. Re: Wireless keyboard won't turn on after changing battery
    opinionated_andy Level 1 Level 1 (0 points)

    Folks, I had the same problem, and later discovered - the positive side of the battery goes inwards into the "tunnel". Its kinda non obvious - at least to me, and i struggled for few hours.

     

    Hope this helps.... positive button inside, negative flat portion outside.

  • 245. Re: Wireless keyboard won't turn on after changing battery
    macinoffagain Level 1 Level 1 (0 points)

    That fixed it! Thanks for sharing PhilW3995! By the way, after turning the plastic piece around, dropping the batteries in flipped it again. I had to redo and then tilt the keyboard to let the batteries slide in slowly to keep the plastic piece in place.

  • 246. Re: Wireless keyboard won't turn on after changing battery
    lordstanley011 Level 1 Level 1 (0 points)

    Used the aluminum foil suggestion and keyboard is now functioning again, Thank You to the original Poster for this resolve, my wireless keyboard works like a champ again. This post was typed on the previously malfunctioning keyboard.

  • 247. Re: Wireless keyboard won't turn on after changing battery
    Explorer122 Level 1 Level 1 (0 points)

    I had the same problem this morning and the aluminum foil suggested has helped me to save the keyboard. I am so surprised that the Apple quality has become this. This doesn't sound like the same Apple I loved for years.

  • 248. Re: Wireless keyboard won't turn on after changing battery
    randiwolf Level 1 Level 1 (0 points)

    Same thing happened to me - but then I realized that my keyboard was not "turned on" - I didn't even know that the sliver button on the opposite end of where you load the batteries is a "power" button for the keyboard. While I was loading the batteries, I must have accidentally pushed it and turned it off (or it turned off automatically). Eitherway, after pushing the button in, my keyboard was recognized.

  • 249. Re: Wireless keyboard won't turn on after changing battery
    d.dang Level 1 Level 1 (0 points)

    Had the same problem didn't touch my mac wireless keyboard for 3 months, try to use it again today with fresh batteries and the green light didn't turn on. Tried the tin foil trick and it worked perfectly! Thanks mate!

  • 250. Re: Wireless keyboard won't turn on after changing battery
    CamihIreland Level 1 Level 1 (0 points)

    I also rolled a ball of foil and it also worked! After trying so many new batteries and nearly throwing my keyboard across the room, it worked. I agree though with others' views, this should not happen Apple, this is not the quality I expect, was both shocked and disappointed.

  • 251. Re: Wireless keyboard won't turn on after changing battery
    bluwnab Level 1 Level 1 (0 points)

    The alumnium ball (piece) in the battery tube worked.

     

    I am reposting this solution, but I did not discover it.

     

    Instructions:

     

    1. Open the battery tube and remove the batteries.

     

    2. Place a small pea sized ball of alumnium in the battery tube.

     

    3. Install the batteries. (Make sure batteries are in the right direction)

     

    4. Close and lock.

     

    5. Turn on Keyboard.

     

    Thanks everyone on this thread for this solution!  Really dissappointed that I have to do this with an Apple product!

  • 252. Re: Wireless keyboard won't turn on after changing battery
    stevieb_xq28 Level 1 Level 1 (0 points)

    Thank you for the aluminum ball suggestion. I was about to order another keyboard, but this simple tip saved me from having to do so. If your keyboard has a green light when you try to pair it, this is not the solution for you; but if you can't get the keyboard to light up at all when trying to pair it to your computer, give this a try.

  • 253. Re: Wireless keyboard won't turn on after changing battery
    straybird Level 1 Level 1 (0 points)

    worked perfectly for me! I had to make a bigger aluminum ball after the first try. I was afraid that the ball might be too big to stuck the batteries. Thanks for the summery.

  • 254. Re: Wireless keyboard won't turn on after changing battery
    erranttraveler Level 1 Level 1 (0 points)

    I had this same problem on an older model (3 batteries) aluminum keyboard.

    The Aluminum Foil trick worked for me. Here it is again (not my idea, just reposting):

     

    Instructions:

     

    1. Open the battery tube and remove the batteries.

     

    2. Place a small pea sized ball of alumnium in the battery tube.

     

    3. Install the batteries. (Make sure batteries are in the right direction)

     

    4. Close and lock.

     

    5. Turn on Keyboard.