Skip navigation

Large scans corrupted when imported into Aperture

466 Views 7 Replies Latest reply: Jan 4, 2013 7:23 AM by Frank Caggiano RSS
Grand Bork Calculating status...
Currently Being Moderated
Jan 3, 2013 2:27 PM

Several photos scanned with my Epson Perfection 1260 scanner in tiff format went rather wonky when imported into Aperture. The tiffs in question are about 100 to 200 MB in size. Smaller tiffs of 50 to 100 MB imported in the same batch were all OK. The problem pictures now look like abstract art or something from Tron, with bits from other images and lots of areas of blue lines and rectangles.


I just wondered if there is a theoretical limit to imported image size, which I've hit, or perhaps my scans, which were taken directly from the scanner software, have become corrupted. Is there a workaround?


I'm still using Snow Leopard as I need Rosetta, which of course means I haven't been able to update to the very latest version of Aperture (despite only buying it a year ago, which kinda leaves a bitter taste in the mouth), so I'm stuck at 3.2.4.

MacBook Pro, Mac OS X (10.6.8), 13 in, Mid 2009, 4GB RAM
  • léonie Level 8 Level 8 (46,355 points)

    I just tried again: a jpeg with 124.9 MB is ok., a jpeg with 169 MB is o.k., a tiff with more then 1GB displays as patchwork, a tiff with more than 2 GB crashes Aperture.


    The boundaries shift a bit, depending on how much RAM I have.

    So probably you have hit the border with 100 MB.  I could not find an official limit to the picture file size in Aperture. Apple only promises that Aperture will deal well with images taken by most digital cameras. And there the limit to the filesize is still below 100MB.


    I am preprocessing my scans in Photoshop and import them as jpegs into Aperture, to reduce the file size.

    What kind of tiff are you using? Does your scanner produce 16 bit tiffs?

  • Frank Caggiano Level 7 Level 7 (22,755 points)

    The files are mostly scanned with grayscale,

    This is going to cause possible problems in Aperture. Aperture is not designed to work on grayscale images.


    See Aperture: Unexpected results when working with grayscale or other non-RGB images

  • léonie Level 8 Level 8 (46,355 points)

    If 100MB is my limit when I have 4GB of RAM, how much do you have?

    I have one MBP with 8 GB RAM and one with 16 GB. The above result was with 8GB. 16GB give a much speedier performance, but even with 16 GB I cannot load 2GB scans without crashing Aperture.


    How do I determine how many bits the tiffs are that my scanner produces?

    Open the image files with Preview and use "Tools > Show Information"

    Screen Shot 2013-01-04 at 1.15.26 PM.png

    This will show you the color model and the bit size.

    If you have a standard scanner model your scans will probably 8bit tiffs, but check.


    If I rescan these big images as RGB they will be absolutely VAST

    It is not a good idea to scan RGB if you want grey scale; this will only introduce color noise.

    It is much better to scan in grayscale mode and then to convert to RGB and use LZW compression to prevent the file size from growing to much. A pity, that you do not have PhotoShop to be able to simply change the mode of the image file to RGB.  Right now I do not have GIMP installed on this machine, but you could give it a try. Gimp is free, and can do similar things as Photoshop.


    Also you could try to use "Preview" to export your Tiffs as jpeg - so far I have had no problems with high quality grey scale jpegs in Aperture. It will depend on what kind of edits you want to do. You will not be able to brush color in, but sharpening, contrast and other enhancements should work well.





  • Frank Caggiano Level 7 Level 7 (22,755 points)

    I can't say for certain that the fact that these images are grayscale are causing the problems you are seeing. I just wanted to point out that Aperture isn;t designed to work with these images and using then in Aperture could cause flakiness.


    It's similar to the situation with Aperture and libraries on NFS volumes. Apple says not to do it yet some users do do it and have no apparent problems. So is it a good idea to do it. As long as it works for you I guess it's OK but once you have probelms you need to eliminate the things that Apple says cause problems.


    Léonie has given suggestions for converting the images, seem like it's worth a try.




More Like This

  • Retrieving data ...

Bookmarked By (0)


  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.