1 2 Previous Next 18 Replies Latest reply: Jan 9, 2013 10:43 PM by FirestormCS
FirestormCS Level 1 Level 1 (0 points)

I am getting the kernel panic message "You need to restart your computer.  Hold down the Power button..." when I start my MBP.  I have scanned the disk with fsck.  The disk checked fine - only report that the disk was modified.  I have tried to boot from the OS disk - no luck.  I have Lion and Bootcamp win Windows 8 installed.  The computer was booting Windows 8 in bootcamp and it locked up.  Ever since it keeps locking up on boot.


MacBook Pro, Mac OS X (10.7.5)
  • 1. Re: kernel panic message
    Linc Davis Level 10 Level 10 (117,765 points)

    Windows 8 is not supported in Boot Camp. The results of installing it are unpredictable.

  • 2. Re: kernel panic message
    FirestormCS Level 1 Level 1 (0 points)

    I realize that, however, I have been running it successfully for months.

     

    How could this affect the ability of the MBP to boot from my superdrive?

  • 3. Re: kernel panic message
    CMCSK Level 6 Level 6 (10,425 points)

    If the solutions in the article Mac OS X 10.7 Help: If “You need to restart your computer” appears does not help you, you should post in the Boot Camp forum area.

     

     

     

     

     

     

     

     

     

     

     

    dancingsmilie.gif

  • 4. Re: kernel panic message
    Linc Davis Level 10 Level 10 (117,765 points)

    If you have more than one user account, you must be logged in as an administrator to carry out these instructions.

      

    Launch the Console application in any of the following ways:

     

    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)

     

    ☞ In the Finder, select Go Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.

     

    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.

     

    Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • 5. Re: kernel panic message
    FirestormCS Level 1 Level 1 (0 points)

    Can get the information from the single user mode startup?  I can't get the Mac to boot to follow your instructions.  If so, can I write the log to a USB stick and then use my PC (which I am using now to interact with you) to post the information?

     

    Another interesting discovery - - I was in safe mode; I can navigate around the directories using cd and ls.  When I typed exit; I received (amoung other normal looking stuff), an error message

     

    SMC::smcReadKeyfiction Error: smcReadData8 failed for key $NUM (kSMCKeyNotFound)

    SMC::smcReadKeyfiction Error $NUM kSMCKeyNotFound(0x84) fKeyHashTable=0x0

    Previous Shutdown Cause: 3

    SMC::smcInitHelper Error: MMIO regMap == NULL - fall back to old SMC mode

    NVDANV50HAL loaded and registered

    - - - more stuff - - -

    Then some NTFS-fs errors including ntfs_restart_page_header_is_valid(): $LogFile version 2.0 is not supported (This Driver supports version 1.1 only.)

  • 6. Re: kernel panic message
    Linc Davis Level 10 Level 10 (117,765 points)

    If you can log in in safe mode, do that and post the panic report.

  • 7. Re: kernel panic message
    FirestormCS Level 1 Level 1 (0 points)

    MAC Newby Error:  I was not clear.  I just realized that Safe Mode and Single User mode are not the same.  I was incorrectly calling them the same thing.  I was using single user mode in my previous reports of errors.  I just tried to boot Safe Mode (Hold SHIFT Key).  The gear spins and the progress bar moves but only makes it a little more than 1/4 the way then dissapears and the gear stops spinning.

  • 8. Re: kernel panic message
    Linc Davis Level 10 Level 10 (117,765 points)

    That indicates a corrupt volume or partition table on the boot drive. What backups do you have?

  • 9. Re: kernel panic message
    FirestormCS Level 1 Level 1 (0 points)

    I have a smaller HDD that I used to upgrade to the current drive.

     

    However, I get the same panic message when I boot from my original OS DVD (Press C during power up).

     

    Could the main board video chip be bad.  The startup mode with the grey screen looks normal.  The single user terminal mode works fine.  I can press the option key and get the Grey screen that shows the MAC Volume and the Windows Volume and I can select either one.  When I select the Windows disk the screen goes blank and does not boot.  When I select the MAC volume the apple appears and the gear spins until the dark grey screen scrolls from the top and the black box with the kernal panic message appears.  Could it be that this is the point where the video mode switches and this causes the computer to lock up???

  • 10. Re: kernel panic message
    Linc Davis Level 10 Level 10 (117,765 points)

    Try the hardware test. It's almost completely useless, but once in a while it works.

     

    Intel-based Macs: Using Apple Hardware Test

  • 11. Re: kernel panic message
    FirestormCS Level 1 Level 1 (0 points)

    Hardware test will not start from DVD (Snow Leopard Install DVD).

  • 12. Re: kernel panic message
    Linc Davis Level 10 Level 10 (117,765 points)

    You're having so many problems doing things that should be routine that I don't see what else it can be but a hardware fault. I suggest you make a "Genius" appointment to have the machine tested.

  • 13. Re: kernel panic message
    FirestormCS Level 1 Level 1 (0 points)

    No apple store in my area .

     

    I located the panic log file in single user terminal mode.  Can I get it onto a USB drive in this mode?

  • 14. Re: kernel panic message
    John Galt Level 8 Level 8 (36,315 points)

    FirestormCS wrote:

     

    Hardware test will not start from DVD (Snow Leopard Install DVD).

     

    Apple Hardware Test may only be invoked by booting from the grey disc included with your Mac with the words "Apple Hardware Test" or "AHT version xxx" printed on it. Hold the d key while starting from the disc to load AHT.

     

    Some computers that have been upgraded to Lion may be able to use an Internet based version in the same manner, by holding option d.

     

    The tests will only reveal significant faults.

1 2 Previous Next