Skip navigation

Time Machine Migration

242 Views 9 Replies Latest reply: Jan 10, 2013 11:36 AM by Linc Davis RSS
Fully1967 Calculating status...
Currently Being Moderated
Jan 10, 2013 2:31 AM

Can anyone please help with my time machine problem. I partitioned an external hard drive and use one partition for time machine and one for back up using Carbon Copy Cloner. The plan being if my hard drive goes down I get a new one reinstall from backup and keep going where I left off with time machine. The problem I have encountered started when I carried out the usual test for the backup by booting from it but time machine came up with an error stating that there was already too much information on the hard drive. I have 290 Gig on a 500 Gig harddrive and use a 500 Gig partition for backup and a 500 Gig partition for time machine. If I delete the data in the time machine partition it will happily start creating a new time machine backup again so its not a space problem its a wanting to create a new time machine problem on top of the existing one.  In other words it is not seeing the time machine backup as belonging to the OS that created it. Next I booted back to my internal hard disk and the same error came up again.

 

I have tested various combinations and the same thing keeps happening, in summary if the time machine is accessed by the OS that created it on any hard drive other than the one that created it then it tries to create a new backup. Once that action has happened it also does the same thing if I then boot back to the original internal hard drive.

 

My main concern is that if my hard drive goes down then I'll be able to restore it on a new hard drive ok but the OS will not see the time machine as belonging to it.

 

Any help appreciated,

 

Dave.

Powerbook
  • AnaMusic Level 9 Level 9 (55,180 points)
    Currently Being Moderated
    Jan 10, 2013 2:38 AM (in response to Fully1967)

    For All things TM... See Here  >  http://pondini.org/OSX/Home.html

     

    Personally I prefer to have One dedicated Drive for TM and A seperate Drive for my Clone.

     

    And a third Drive I backup to manually...

     

    Doesn't do to have all your eggs in one basket.... and you can Never have Too Many Backups.

  • Shootist007 Level 6 Level 6 (16,640 points)
    Currently Being Moderated
    Jan 10, 2013 2:41 AM (in response to Fully1967)

    I take it you are running Moutain Lion? If you are you are not alone I have the same problem. Every time I try to do a TM backup of my Mt Lion partition, I have 3 versions of OS X installed on my MBP (Snow Leopard, Lion and Mt Lion), it always ends up doing a complete backup not just of the files that have changed and then it runs out of space on the external and fails.

     

    I am surprised there are more posts about this as I think it is a Bug in the ML TM system.

     

    I have no advice except to Wipe the Drive and Re-Install Clean/Clean. Clean/Clean meaning do not use the TM backup to replace anything on your system. Install ML then all your programs then copy over your data files from the Clone you made and do all your settings manually.

  • clintonfrombirmingham Level 7 Level 7 (26,790 points)
    Currently Being Moderated
    Jan 10, 2013 2:55 AM (in response to Fully1967)

    First of all - you'd be best served by having two external drives: at least one dedicated to Time Machine and at least one for use with Carbon Copy Cloner. I have two drives with alternating Time Machine backups and three external drive clones of my internal drive. It's a pretty safe bet that all five wouldn't fail at the same time.

     

    That said, I'm not sure why you're having the problems... Time Machine should work just fine with a partitioned drive. You may want to look at Pondoni's Time Machine Troubleshooting FAQs - http://www.pondini.org/TM/Troubleshooting.html - and see if any are appicable to your particular situation.

     

    Good luck,

     

    Clinton

  • clintonfrombirmingham Level 7 Level 7 (26,790 points)
    Currently Being Moderated
    Jan 10, 2013 3:14 AM (in response to Fully1967)

    I don't think that I fully understand your problem. Let me see if I can summarize your setup.

     

    • You have a MacBook Pro.
    • You have one external hard drive, partitioned into 'two' drives.
    • One of the partitions is used for a Time Machine backup of your internal drive.
    • One of the partitions is used as a clone of your internal drive using Carbon Copy Cloner.

     

    Is that correct?

     

    I'm not sure what the problem is... are you trying to use the clone to backup to Time Machine?

     

    Clinton

  • clintonfrombirmingham Level 7 Level 7 (26,790 points)
    Currently Being Moderated
    Jan 10, 2013 3:45 AM (in response to Fully1967)

    See the File System Event Database section at http://www.pondini.org/TM/Works.html.

     

    Maybe it's just the way that Time Machine works that's causing the problem?

     

    Clinton

  • Linc Davis Level 10 Level 10 (107,850 points)
    Currently Being Moderated
    Jan 10, 2013 11:36 AM (in response to Fully1967)

    It sounds like you're trying to run a backup while booted from your mirror backup. If that is what you're doing, Time Machine is performing as designed. The mirror system is not the same as the original and should not be backed up at all. Back up only when booted as usual.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.