Currently Being ModeratedJul 30, 2012 10:29 AM (in response to luzkenin)
Has anyone else experienced this? This is really stopping my workflow. I've turned off the Apple TV but I guess Logic is just scanning the device that ML presents it. Anyway to stop that from happening?
Currently Being ModeratedJul 30, 2012 11:47 AM (in response to luzkenin)
Logic only shows that dialog if it senses an audio interface has been plugged in while Logic is running... must be the airplay driver trying to connect.
Make sure The Airplay device is not selected as a Default device in Audio MIDI Setup.
Other than that you could probably force quit the device/process from Activity Monitor... does Activity Monitor still exist in ML?
Currently Being ModeratedJul 30, 2012 1:21 PM (in response to Pancenter)
Thanks for the reply. "Default Ouput" is ... the default output. I also tried disabling WIFI and it stopped asking me. But once I reenabled wireless is started asking again.
Currently Being ModeratedJul 30, 2012 1:49 PM (in response to luzkenin)
Well, at least you have a partial but unsatisfactory solution. As I pointed out in another thread, Logic is falling behind the OS/Hardware development.
Currently Being ModeratedAug 28, 2012 9:25 AM (in response to Pancenter)
Currently Being ModeratedAug 28, 2012 9:27 AM (in response to luzkenin)
Currently Being ModeratedAug 28, 2012 9:34 AM (in response to luzkenin)
I had that for a couple of days when I first upgraded to ML; I did the same thing as you and just disabled the WiFi. I assumed it was periodically finding the Airport Express that I have plugged into my stereo inside the main house, which sometimes gets a marginal connection from the studio.
Oddly, the problem completely went away after a couple of days, even before I upgraded to 10.8.1. I don't think I really changed anything other than reboot the machine (and the main Airport router) a few times, so I have no idea what (if anything) I did to make it stop.
So this is really of no help I know... but I'd completely forgotten about it until I saw your post. I really haven't seen it since. So it is fixable... somehow.
Currently Being ModeratedSep 28, 2012 7:27 AM (in response to luzkenin)
I also get this message - usually after some hours of using Logic, sometimes after a few minutes. Started with ML. It doesn't help to switch off WiFi.
Currently Being ModeratedOct 5, 2012 3:04 PM (in response to luzkenin)
I finally figured out the source of this problem, for me. I use AirServer on a Mac Pro to be able to send A/V from my MBP to it's screen/speakers. I had been running v4.4. Updating to the current v4.5.2 seems to have solved the problem.
If you use AirServer, AirParrot or similar software, update to the latest and/or contact the developer and inform them of the issue.
Hope this helps.
Currently Being ModeratedJan 13, 2013 1:15 AM (in response to Yarrow Sweningsen)
Hey how to I disconnect from my screen speakers? I dont want to use my screen speakers while working with logic pro i want to use my computer speakers. Can you help?