4 Replies Latest reply: Jan 18, 2013 7:32 AM by William Lloyd
ridgwaymountaineer Level 1 Level 1 (0 points)

How do you "shrink" the width of the inspector window?  The arrow that appears will only widen the inspector area.  I would like to adjust the width of inspector therefore widening the viewing area.

  • 1. Re: Changing viewing area
    Kirby Krieger Level 6 Level 6 (11,920 points)

    There is a minimum.  If you can't make it any narrower, but you can make it wider, you are at the minimum.

     

    You can toggle the Inspector itself on/off with "i".

  • 2. Re: Changing viewing area
    ridgwaymountaineer Level 1 Level 1 (0 points)

    Except that I made it bigger by pulling the margin to the right and now I can't get it back to the narrower size.  I know that I can change the configuration to the opposite side, but that does not correct the width.

     

    I don't see anything in preferences that would cause this "one way" direction!  I am tempted to make it as big as possible and then see if the "arrow" changes direction...but will wait till I see if anyone else has this issue.

    Thank you for the information.

  • 3. Re: Changing viewing area
    léonie Level 9 Level 9 (51,665 points)
    and now I can't get it back to the narrower size

     

    Does it keep the larger size, even after quitting and relaunching Aperture?

     

    Then your Aperture Preferences file may be corrupted.

    I'd suggest to remove the Preferences file

         ~/Library/Preferences/com.apple.Aperture.plist

    from your User Library to the Desktop. 

    • Quit Aperture and log off and on again before removing this file.
    • Then try, if now your Inspector panel has the correct size, when you relaunch Aperture.

    If it does not fix the problem put the preferences back. For after removing the preferences, you will have toreset all settings from the "Preferences" panel.

     

    Your user ibrary is hidden in MaxOS X 10.7 or later.

    To unhide it, use the Finder's "Go" menu.

    • Click somewhere on your empty Desktop to bring the Finder forward, then click "Go" in the Finder's main menu bar.
    • Then hold down the options key ⌥ until "library" appears in the drop down menu. Click "Library" to open.

     

    Regards

    Léonie

  • 4. Re: Changing viewing area
    William Lloyd Level 6 Level 6 (19,350 points)

    Unfortunately, you can't.

     

    You may wish to experiement with full screen mode, which when you view the inspector you can shrink it (vertically at least), and it's undocked so you get the full screen for your photo.

     

    A cool tip when using the inspector in full screen mode: If you hold shift while making adjustments, the whole panel goes invisible except for the slider you're moving.