Skip navigation

My macbook pro does not eject dvd although making ejecting noise and tried all non-invasive suggested solutions.

6409 Views 9 Replies Latest reply: Jan 19, 2013 11:34 AM by bizzj RSS
alessandrafromlondon Level 1 Level 1 (0 points)
Currently Being Moderated
Feb 7, 2012 1:37 AM

The other night I watched a dvd in my laptop and once i pressed the eject button it made the noise as if it was coming out but it didn't.Now it keep making than noise everytime I attempt to eject but nothing comes out. Since then I tried all the 5 steps suggested on her but I have not been able to get it out.

 

My machine is 2 months out of warranty and only couple of weeks ago I had the hdd replaced at a cost as it had failed. I am not impressed with all the problems developing shortly after warranty expires.

 

if the superdrive has failed does any1 know how much it would cost to get it fixed? Any other solutions I could try?

 

Also I want to make a formal complaint who can I call and send an e-mail to?

MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8)
  • shldr2thewheel Level 7 Level 7 (25,335 points)

    See if there are some methods here you havent tried.  These are the only phone numbers and email addresses that I am aware of that are made public by Apple: http://www.apple.com/contact/

     

    Force eject a stuck cd/dvd

     

     

    • First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.

    • If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.

    • Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.

    • If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.

    • Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
    • Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.

    • Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
    • Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.

    • If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.

    Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

  • shldr2thewheel Level 7 Level 7 (25,335 points)

    Well, if you are a brave soul and have the tools, you can try removing the optical drive and see if you can get the disc out somehow: http://www.ifixit.com/Guide/MacBook-Pro-13-Inch-Unibody-Mid-2010-Optical-Drive-R eplacement/4318/1.  Not sure how much a replacement optical drive would cost, but if you live near an Apple store or AASP, it would be best to call them and make an appointment to have them check it out before attempting to disassemble the mac yourself (I just wanted to give you the option).

  • cmelbourne91 Level 1 Level 1 (35 points)

    restart your computer, but dont hold the option key at all, just hold the eject all the time, from the moment of restart.

  • OGELTHORPE Level 7 Level 7 (22,365 points)

    This is your last resort before going to the Apple store genius bar.  Hold you MBP in a position where gravity is you assistant and shake it with a vacuum cleaner engaged.

     

    Good luck.

     

    Ciao.

  • eww Level 9 Level 9 (52,975 points)

    When the drive makes the eject sound but nothing comes out, there is good reason to think a mechanical obstruction or mechanical failure is involved.

     

    Inside each of the several optical drives I've opened in the past, there have been at least a couple of small strips af synthetic felt-like fabric with self-adhesive sticky backings applied to certain parts of the mechanism, to prevent metal parts from scratching discs as they are transported into and out of the drive. In two cases that I recall, one of these sticky fabric strips had come loose from its rightful place and gotten stuck to a disc in the drive as well as to some improper part of the drive's case, effectively preventing the disc from either spinning or being ejected. I suspect that what caused the tape-like adhesive on the strips to come loose and the fabric to curl so the stickum touched the disc was probably heat. It's been several years since I've seen that, and I don't know whether the same kind of failure is possible in recent MBP drives.

     

    In another case, a part of the disc transport mechanism -- which is quite a complicated linkage of moving parts with small tolerances for imprecision -- had become partially detached, with the result that the eject button caused everything to move almost as intended except the disc, which wasn't "grabbed" properly.

     

    In all three of these cases, the affected drives made noises when trying to eject discs that were similar enough to their normal noises for me not to have noticed any small differences. They sounded pretty normal. None was in a machine that I used myself, so I wasn't completely habituated to the drives' usual sounds. Perhaps if I had been, I'd have noticed differences. But I still would have had to remove the drives and unscrew their covers to get at the causes of their problems and retrieve the discs that were stuck. I had been inside my own and others' machines often enough for other purposes to be comfortable doing that, and I had the outstanding illustrated instructions at iFixit.com to guide me. In all three cases, I replaced the drives with new ones after recovering the discs from them. No one repairs these drives professionally because after including a technician's time, it's cheaper to replace them, so you can't buy parts and repair them yourself.

     

    Removing the drive from a unibody MBP is really quite simple -- much simpler than in the Powerbooks I was working on. And there are just four screw holding most drives' top covers on. Removing those lays bare the whole interior, so a disc can easily be lifted out.

     

    http://www.ifixit.com/Device/MacBook_Pro

  • bizzj Level 1 Level 1 (0 points)

    I'm pretty sure this is what is causing my problem as well.  I was able to eject the stuck disk after using a moistened cue tip to soften the felt that you can see in the opening slit.  I had noticed when inserting the disk that I had to put more pressure on the disk to get it to go in, but didn't pay attention to that until it wouldn't eject. Obviously the problem was not the drive mechanism, but simply the physical obstruction of the felt.

     

    I'm not sure I really want to replace the drive.  A nuisance, but I rarely use it these days.  I have other computers and will make disk images of any DVDs I really need (e.g. software install), and make sure I have a bootable external hard drive as well.

     

    I might venture to the Genius Bar to see if they know how to fix it without actually replacing the drive.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.