Currently Being ModeratedJan 26, 2011 3:37 PM (in response to Woogetybop)As a Mac user forced to use a Windows 7 laptop for work, I am keenly interested in getting this type of printing to work with my LaserWriter 12/640PS. I did LPR printing to it with my last work laptop (Windows XP), but need to set it up again with this new Windows 7 system.
I was able to enable the LPR Port Monitor as you specified. Then, the tech support guys at my employer copied an "i386" folder (presumably from an xp install disk as specified) to a network share that I can access. But I am running into problems on your step that says to "replace the A:\ path with the path to the printer drivers." I can indeed replace it with the path to the \i386 folder, but I'm not seeing any path to printer drivers simply by selecting the \i386 folder, and when I search the folder for words like "apple" or "laserwriter," nothing shows up. How can I find the exact printer drivers I need? Once I have that, I won't have any trouble with the rest of the instructions, as I've done this all before. Thanks.G5, Mac OS X (10.4.11)
Currently Being ModeratedJan 26, 2011 4:07 PM (in response to KC Tom)I did a little more digging and found this thread at Microsoft ( http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/883d00df-bdf3 -4dec-b91f-524963ec81a7 ), which is remarkably similar to the original answer given on this original thread.
The Microsoft version of this discussion gave me a further clue by mentioning a "DRIVER.CAB" file in the i386 directory that I needed to select via the printer driver install dialog, although even this tip was incomplete, because DRIVER.CAB is not of a file type that is shown or can be read by the install driver routine (i.e.: I could only see it via a regular window in Windows 7 OS). Instead, I took a wild guess and selected a file in that directory called "DRVINDEX", and a moment later a whole plethora of alternative printer manufacturers and models were listed, including "Apple" and then "LaserWriter 12/640PS". Next up: Adding the system printer itself, using this driver and the printer's IP address. Key tip: queue should be listed as "RAW"--at least that worked under XP.G5
Currently Being ModeratedJan 30, 2011 7:59 PM (in response to Woogetybop)Hey I found this download of print drivers that work with this guide.
Both 32bit and 64bit included.
WoogetybopMac Book, Mac OS X (10.5.6)
Currently Being ModeratedJan 23, 2012 9:14 PM (in response to Woogetybop)
I hope this isn't considered thread necromancy... but do you maybe know if it is at all possible to use a binary communications protocol (such as Binary, BCP or TBCP) between a Windows 7 box and an old LaserWriter? I got my hands on a cheap and really well working Laserwriter Select 360, but it's soooooo slooooooow even at 57600 baud for anything containing even moderate amounts of fonts or graphics (and what doesn't, these days). And yes, I already switched from 600 dpi to 300 dpi w/ FinePrint. I tried messing around with stuff like this:
serverdict begin 0 exitserver
(%Serial_NV%) <</Protocol /TBCP>> setdevparams
systemdict /quit get exec
The setting was indeed changed in the printer's NVRAM but it didn't help. I also tried "Binary" and "Raw" protocols, tried disabling the PS/PCL Autoselection, played with the Options in the Windows driver's properties page, etc. But no matter what I do, whenever I enable anything but ASCII in Windows the printer always prints a page that says "This job contains binary data, but your printer requires a special driver setting to receive binary data on this channel." So, I ask myself, WHAT IS that special driver setting?
I'd be grateful for any help at all.
The hint with the Windows XP 64 disk was invaluable by the way! Without that I'd never got it installed.LaserWriter Select 360, Windows 7
Currently Being ModeratedJan 23, 2013 8:27 PM (in response to Woogetybop)
UPDATE: My LaserWriter 16/600 is alive and well. And is used on 2 Mac's and 3 Windows 7 x64 machines, one Windows 7 x32, 1 Windows 7 Starter (Can't install LPR printer, but I can connect to this printer by it being shared on another Window 7 machine. My Home Theater windows 7 machine is allways on.) and yes a WindowsXP machine.
I needed to add this printer to my sons laptop (Windows 7 home premium x64bit) and I miss placed the information. I know its around here somewhere. Now I'm glad I posted this information. I followed my instructions but got hung up due to lack of clairity on the part where you ADD A NEW LPR PRINTER. PRINTER MUST BE ON LINE. Adding the IP address was fine BUT THE PRINTER NAME HAS TO BE A NAME WITH NO SPACES. If the name is wrong, you get a warning that it can't find the printer. You go to print something and it say's ERROR, PRINTER BUSY. If you did this right the new printer wizzard will move to the next step.
Good Luck and may your DINOSAURS keep printing!!
Currently Being ModeratedOct 14, 2013 8:20 PM (in response to Woogetybop)
I have an old Laserwriter II that happens to have an ethernet port. Does anyone have a solution for making this work with Windows 7 (or any computer at all)?
I would like to use this laserwriter II (with ethernet port) with windows7. Please direct me to the drivers if possible.
Good luck !