Currently Being ModeratedJan 26, 2013 11:46 PM (in response to chfilm1)
Do you have any picture styles set in your Canon 5D Mark III? I.e. "Preserve Highlights"? These are not reflected in the raw. Aperture is processing only the raw when doing the raw developement and does not apply any of the in-camera settings. But the camera-generated preview - show when loading the image - does reflect the preprocessing by the camera. Adobe raw converter on the other hand does understand the "Preserve Highlight" setting and applies it, but it is camera specific. I would not use any camera programs when shooting raw. You will not see in the viewer, what your raw image will be like; if it is over exposed for example.
See this discussion: RAW Processing problems with Canon 5D Mark iii
Currently Being ModeratedJan 27, 2013 6:31 AM (in response to léonie)
Hm, at first glance it seemed that the other thread describes exactly the same issue, and it got resolved by your answer, but I don't have preserve highlights on, not on any of the cameras. Besides, did you take a look at my pictures in close detail? Did you see the enormous difference in sharpness detail and noise between aperture and Lightroom?
Currently Being ModeratedJan 27, 2013 7:27 AM (in response to chfilm1)
Yes, I had a look. The contrast and noise are most obvious in the darker areas with bad lighting situation. That remonds me of another discussion. Aperture seems to have a problem with the developement of raws taken in artificial light, see: Re: Strange blue color
How are your "Raw Fine Tuning" settings in the Adjustment panel? I found that the default value for the "Boost" is way too high for my Canon raws. Reducing "Boost" and hue helped a lot to bring out detail. If the controls are not grayed out, I'd also try to adjust the noise and sharpening controls in the Raw Fine Tuning and save the best settings as a default for your cameras.
Currently Being ModeratedJan 27, 2013 9:11 AM (in response to léonie)
I tried to reduce the boost setting and things got a little better, but still, what Aperture puts out looks like an ugly jpg compared to the output of lightroom
Another example: I got pretty close thanks to your advice, but in the details you can just see how noisy and blury the aperture picture looks:
Currently Being ModeratedJan 27, 2013 9:24 AM (in response to chfilm1)
I performed some more tests and basically the denoise and sharpeing module of aperture seem to lack the power of lightroom, because you can get pretty close, but thr resutls always look a bit messy in direct comparison
Currently Being ModeratedJan 27, 2013 10:58 AM (in response to chfilm1)
Looking at your newest examples, this seems again to be a problem of the strong blue colors. I'd send feedback to Apple and file a bug-report: http://www.apple.com/feedback/aperture.html
Some of the missing sharpness looks like color bleeding to me, also aliasing at the strong edges. Have you also tried the demosaic setting in the Raw FineTuning?
Currently Being ModeratedJan 27, 2013 11:32 AM (in response to léonie)
Hm, the moire filter doesnt really do anything to the picture.
After doing tests the entire day I feel like the biggest difference after you figured out all the other settings manually, seems to be the raw denoising in aperture wich just seems to suck im comparison to Adobe's software.
But there's also other differences, like whenever I hit "auto" on the basic raw settings in LR, like expose and such, the result always looks better, more defined, more structures and fine details, small highlights come out and the shadows are still there, where aperture sometimes seems to work a bit more rough. What puzzles me is that I never had those issues before with my 400d raws.
Currently Being ModeratedJan 27, 2013 12:56 PM (in response to chfilm1)
Can you put some of the 6D's RAW files somewhere they can be downloaded? Do you have the same problem with 6D RAW files downloaded from the Web (such as sample files provided by reviewers)? Can you provide a link to them as well?
It seems like a bug, but it is worth ruling out your system, your camera, and your workflow.
Currently Being ModeratedJan 27, 2013 3:57 PM (in response to chfilm1)
Ok so I tried it out with some samples by other 6Ds at ISO 6400, and the results are similar. As long as I completely deactivate the noise reduction in both applications and don't touch any other controls, pictures look pretty much the same, but as soon as I hit the "auto" button in Lightroom for exposure, brightness, contrast and stuff, it makes the pictures really shine where aperture just fails
Same with the noise reduction...
But the "images appear too dark on import" issue remains in both apps, but in LR it's just not an issue because it then immediately corrects the contrast with the Auto function.
Lightroom's basic autocorrect look:
aperture's basic autocorrect look:
http://chfilm.de/download/foto/aperture_autocorrect.jpg (look how it overexposes everything)
Currently Being ModeratedAug 16, 2013 7:58 AM (in response to chfilm1)
I'm having this same issue with Aperture 3 and my Canon 6D. It wasn't a problem until I updated my system to OS X 10.8.4. The same thing happens in Preview too. So my guess is that it's Apple's RAW processing and not just Aperture. I've started shooting RAW+JPEG and the difference is staggering. The RAW images are way too dark and heavily vignetted. Here's a sample (JPEG on the left, RAW on the right, no adjustments to either).
Currently Being ModeratedAug 16, 2013 8:54 AM (in response to anonymous_support)
Well it's just another small little coffin nail in apples "abandon the pro user strategy".
I'm just mad at them for in the past it was exactly those tiny details that made their software stand out. I had to switch to a lightroom based raw processing workflow, then only preserve the best 100 processed photos as jpgs and send them over to aperture in order to have them in my photo stream and together with the rest of my library.
It's really sad! But Lightroom shows the Raws as they're supposed to look like and also does way better processing afterwards when it comes to noise reduction or recovering highlight details.
Try it out! You'll be astounded. And please send a report to apple!