Currently Being ModeratedJan 4, 2013 9:38 AM (in response to James Wishart)
After a very lengthily conversation with an Apple Senior Advisor we were able to determine that it was a firmware update on my Dlink router. Yup, a firmware update on the router. It seems that the web interface for the router was lying to me when it stated that I had the most recent update to the firmware. Good fun! I'll see how it goes over the next few days, but it seems that the wireless is working now as it should be.
FYI: Apple contacted me directly using the information in my profile (email and telephone) and we were able to schedule a phone call that worked well for my schedule. So, yes, someone at Apple does read these forums.
Currently Being ModeratedJan 4, 2013 12:52 PM (in response to EastcoasterWestcoaster)
I just tried a hard restore by hooking up the ATV3 to my iTunes, and no luck: it did restore properly, but when I connect it to the TV & the WiFi, it hangs up on "Loading Kirby's Library" and just keeps loading... never connects.
Currently Being ModeratedJan 4, 2013 3:41 PM (in response to dchao99)
You know what, it worked: after updating to the most recent version of iTunes, ATV3 finally connected to my library. It took a minute but it did kick in. I'm surprised that that was necessary tho... I was using the most-recent version of iTunes that came before the recent issue of 11.
So the fix for me with ATV 3 was:
- hard reset by attaching it to my Mac and doing a "restore" from inside of iTunes
- updating to iTunes 11
Currently Being ModeratedJan 11, 2013 9:01 PM (in response to RandomVillain)
The update bricked my ATV2. after the update, I plug in power apple logo show up then disappeared then only black screen. can't even go to select langage screen. only black screen after the apple logo. I tried restoring back to 5.0.2 still no help. please help.
Currently Being ModeratedJan 12, 2013 4:09 PM (in response to 64211659)
My ATV can now find my wireless network. After uplugging the ATV, my comcast modem, and my Apple Airport. It seems that the select button takes two clicks to get it to select. In Pandora, If i only click once on the channel I want to hear, it gives me a selection to make it a favorite. It I click twice, I can skip that part.
Currently Being ModeratedJan 25, 2013 11:14 AM (in response to RandomVillain)
like a lot of folks, after updating my ATV2 to 5.1 i had the dead apple tv with the blinking light and a usb connect graphic on screen.
followed the procedures above and attempted downgrade to 5.0.x as well as upgrade to 5.1.1
in both cases, itunes spends a while "preparing apple tv for restore" but then ends up with error message:
apple tv could not be restored, an unknown error occurred (1611)...
thinking it was a problem with micro-usb cable, went and bot a new one (checking for data transfer ability) for 15 bucks. no difference...
anybody else experience this? any solution?
that stupid ATV2 has been sitting like a brick for the last 3 months, almost ready to chuck in the garbage and get a roku or something...
Currently Being ModeratedJan 26, 2013 7:00 AM (in response to ishujaat)
Yes I had this exact problem. I was using a macbook to try to restore to previous version and it WOULD NOT go past the "preparing apple tv for restore". What I ended up doing was running iTunes on a windows laptop and the restore worked perfectly.
Currently Being ModeratedJan 29, 2013 6:02 AM (in response to RandomVillain)
I tried to update and it failed with a strange error (unknown error) so I tried to do the restore with the cable. I detached everything and then attached the cable and then power and it showed up in my iTunes. The resore also failed, and now it will not even show up on iTunes 11 on a PC. iTunes says it is the latest. Any ideas? Or did I brick it somehow?
Currently Being ModeratedJan 29, 2013 8:54 AM (in response to RandomVillain)
Despite trying all the fixes mentioned in this thread, WIFI remained completely broken on my ATV3.
I just took my ATV3 back to the apple store and got a replacement. The new ATV3 works perfectly on 5.1.1, and WIFI performance is superb
Currently Being ModeratedJan 29, 2013 5:10 PM (in response to roadappleofmyeye)
Got this to work by following instructions for putting ATV in DFU mode here:
Currently Being ModeratedJan 30, 2013 11:04 AM (in response to RandomVillain)
I updated my ATV3 yesterday only to find out that I could no longer use my Ipad remote. Rolling back to 5.0.2 worked for me. Learned a valuable lesson. Always read the forums before updating.
More Like This
- Retrieving data ...
- This solved my question - 10 points
- This helped me - 5 points