13 Replies Latest reply: Feb 1, 2013 8:14 PM by roncarr
iPadPr0blem0 Level 1 Level 1 (0 points)

Well what happened today was... I wanted to update my iPad 2 (which was v5.1.1) to 6.1 (the newest update). Then when i went to settings and software update, I clicked the update button and my iPad just went to the download screen. I thought it was working fine until it came to the recovery mode screen (which ment you needed to connect to iTunes). I was perfectly fine then but when i connected it to my laptop and clicked restore it didn't work. The download screen on the laptop finished and it said the update was corrupted and I was like 'what the ****' and tried it again. It didn't work. So the next thing I do is plug my iPad to the iMac and try to restore it and the results were a fail. I tried a second time and it didn't work. I just finished my third time and hasn't worked. So please HELP ME!


iPad 2, iOS 5.1.1, IOS 5.1.1 to 6.1 = FAIL
  • 1. Re: My iPad can't update to 6.1
    Demo Level 9 Level 9 (76,445 points)

    Did you try recovery mode?

    http://support.apple.com/kb/ht4097

  • 2. Re: My iPad can't update to 6.1
    iPadPr0blem0 Level 1 Level 1 (0 points)

    My iPad is in recovery mode right now

  • 3. Re: My iPad can't update to 6.1
    iPadPr0blem0 Level 1 Level 1 (0 points)

    That's the problem its stuck in recovery mode and no laptop is abke to restore it. I think I said that in my story lol.

  • 4. Re: My iPad can't update to 6.1
    iPadPr0blem0 Level 1 Level 1 (0 points)

    My error message (and yes the punctuation is like this) : Disconnect and reconnect, then try again.Make sure your network settings are correct and your network connection is active, or try again later.

     

    So there is even an error in the error message (lol).

  • 5. Re: My iPad can't update to 6.1
    zuzannawiech Level 1 Level 1 (0 points)

    same problem, if you know what to do let me know, please

  • 6. Re: My iPad can't update to 6.1
    Texas Mac Man Level 8 Level 8 (45,825 points)
  • 7. Re: My iPad can't update to 6.1
    iPadPr0blem0 Level 1 Level 1 (0 points)

    didn't wrk for me

  • 8. Re: My iPad can't update to 6.1
    meredith8 Level 1 Level 1 (0 points)

    I have the exact same problem, and I haven't tried it, but I hope it works. Was your Ipad jailbroken?

  • 9. Re: My iPad can't update to 6.1
    roncarr Level 1 Level 1 (0 points)

    I had the exact same problem and after much frustration and searching I found a solution that work. The only difference in my procedure is i see you have an iMac and I have a Windows machine but I think it will work the same once you determine the correct ipsw file to get.

    I found this website that has all of the restore files for the iProducts which are lined to the Apple server that hosrs them:

    :http://osxdaily.com/2010/11/02/download-ipad-firmware-ipsw/

     

    Mine was trial and error because there were three different files for the iPad 2. but after the third I got it to work.

    So what I did was download the file to my PC. Then I moved the file to:

    \AppData\Roaming\Apple Computer\iTunes\iPod Software Updates on my laptop. For Windows users you will have to set the option to see hidden files. Not sure how it works on a Mac or what the location is.

     

    Then I went through the restore procedure again in iTunes. After plugging the iPad in itunes told me I needed to do a restore. So I clicked on OK and then pressed (again for Windows machines) "shift" while clicking on the Restore button in iTunes. it will then ask you to find the ipsw file location. find the file and select it. If you downloaded the correct firmware version for your iPad for 6.1 then it should work. If not you'll get an error saying the firmware is not compatible in which case delete the ipsw file and download one of the others and start the restore procedure again.

    On you get the right one and it starts to restore you can then restore your other apps and things through icloud. Good luck!

  • 10. Re: My iPad can't update to 6.1
    BigMoFo Level 1 Level 1 (0 points)

    Folks, there are many threads on this board tracking the same issue with the corrupted file error received upon ios 6.1 upgrade for iPad 2 users. I was able to fix the problem based on a solution posted in this thread > https://discussions.apple.com/message/21074848#21074848  I hope you find this helpful and good luck!!

  • 11. Re: My iPad can't update to 6.1
    vailmac Level 1 Level 1 (5 points)

    I have an iPad 2 with 6.0.1 that I tried to update to 6.1.  The process completely "bricked" my iPad.  By reading this and a few other threads I deduced that the 6.1 update appears to be toxic for iPad 2s.  It hasn't been fun, but I'm slowly getting back in action and this is how I did it (I'm on a Mac and I assume much of this will be similar for PC users):

     

    1. I started by going to this web site to get the proper iOS file. http://www.felixbruns.de/iPod/firmware/ These updates are hardware specific and I had to experiement in downloading several until I found the correct one. Once downloaded from Safari I dragged the firmware files to my desktop.
    2. I'm assuming that after failing to update your iPad that you'll see the "Connect to iTunes" on the screen. Go ahead and plug your iPad in and and iTunes should recognize it.  You will then be asked to update and restore.
    3. This is important: do not click the "update and restore" button.  That will only repeat the download/firmware crash issue.  Hold down the OPTION key and then click on update and restore.  That will open a window that you can browse to the desktop where you put the firmware files.  Choose the file you believe is the correct one for your iPad.  I had to repeat this process 4 times, but when you do click on the correct version it will start the update process for the iPad.
    4. Once the process is complete you should have 6.1 properly installed.
    5. At this point you can restore from iCloud or your computer.  Two years ago I switched to iCloud backup and I was frustrated that the message I got from the iPad was that there wasn't an iCloud iPad backup (which I have set up on all our iOS devices).  :-(  It's going to take a few hours to put everything right.

     

    I've worked with Macs since 1985 and have to remind myself that software update problems like this one used to occur a lot more regularly.  We've all gotten used to a much more stable software environment, but that's only a mild comfort for losing about 5 hours out of your day.

  • 12. Re: My iPad can't update to 6.1
    Regina John Level 1 Level 1 (0 points)

    I have had the same problem with the IOS 6.1 update for IPad 2.  I decided to do a manual update and downloaded iPad2,1_6.1_10B141_Restore.ipsw from a couple of places.  It always arrived as iPad2,1_6.1_10B141_Restore.zip instead of .ipsw.  It drove me crazy because when I unzipped it, there were no .ipsw files and these are what you need.  Out of desperation, I changed the .zip in the file name to .ipsw and it worked flawlessly.  Hallelujah!!!!!

  • 13. Re: My iPad can't update to 6.1
    roncarr Level 1 Level 1 (0 points)

    Were you using Internet Explorer? There were a few that found that is what was creating the zip file. They switched to chrome and it worked fine.