Skip navigation

I need to burn a video to DVD so that it runs on any DVD player. Which is the best preset in compressor to achieve this?

224 Views 3 Replies Latest reply: Feb 4, 2013 5:23 AM by Russ H RSS
mikesmartt Level 1 Level 1 (0 points)
Currently Being Moderated
Feb 1, 2013 12:09 AM

I need to burn a video to DVD so that it runs on any DVD player. Which is the best preset in compressor to achieve this?

imac 27" Macbook Pro, Mac OS X (10.6.6), iphone 3gs
  • Russ H Level 6 Level 6 (12,900 points)

    Start with the standard MPEG2 and Dolby DIgital presets from the Disc Burning folder. Depending on what kind of video you use as a source file, Compressor will make the appropriate adjustments to display it properly.


    All DVD is SD.. If you give Compressor a 16:9 HD file, it will output 720X480 anamorphic so it displays correctly on a wide screen TV. Frame Controls are on automatically for HD material because the video needs to be resized. So it takes a bit longer to process than SD. If you run into any difficulties in playback, adjust the bitrates downward by about 10%-15%  in the Inspector (Quality section of the Encoder).


    If you want Compressor to burn the disk, you can enable these stock settings by using the Batch Template.


    If you intend to use a DVD authoring program like Toast, DVD Studio, or Encore,then either use the two output files to author – or for Roxio Toast, you could also use a disk image. (And BTW, if you have iDVD, skip Compressor altogether and bring in a Quick Time file.)


    Hope that's clear. Good luck.


  • Russ H Level 6 Level 6 (12,900 points)

    As I indicated in my first reply, all DVD is SD. If you give Compressor a 1080 or a 720 source file, it will make an mpeg2 file that will play correctly as 16:9.


    Here is what the Encoder pane looks like after I create a target with a 1080p source file, which has square pixels.


    Screen shot 2013-02-04 at 8.06.28 AM.png

    Here's what the Geometry pane looks like. Note that the pixel aspect ratio is no longer square; it has been re-calculated to display 16:9 from a 720X480 format.


    Screen shot 2013-02-04 at 8.09.35 AM.png


    Here's another look at the Encoder, with the Quality tab selected. I have clicked the gear button to make a few changes that will help ensure wide playability – changing the Mode to CBR, I then lowered the bitrate to 6.5 Mbps from the 7.7 Mbps preset.


    Screen shot 2013-02-04 at 8.17.18 AM.png




More Like This

  • Retrieving data ...

Bookmarked By (0)


  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.