Skip navigation

monitoring

532 Views 7 Replies Latest reply: Feb 5, 2013 12:14 AM by gaginker RSS
gaginker Calculating status...
Currently Being Moderated
Feb 4, 2013 6:12 AM

With only one audio minijack port on the Macbook, is there a way to monitor  a track while the port is being used for a guitar?

iPad 2, iOS 5.0.1
  • fenderguy4life Calculating status...
    Currently Being Moderated
    Feb 4, 2013 7:50 AM (in response to gaginker)

    Yes! Go into the track details and click on the radio button that says monitor on/off and put it to "on".

  • fenderguy4life Level 1 Level 1 (5 points)
    Currently Being Moderated
    Feb 4, 2013 8:12 AM (in response to gaginker)

    Sorry I did not realize your question correctly. You are plugging into the headphone jack for your guitar input right? I didn't even know that was possible. I assumed you were going in with a USB. Maybe get a USB adapter for the guitar. Then the headphone jack would be reserved for headphones / speakers. I use a USB mic to capture guitar audio out of my acoustic and mic the amp on my electric guitar.

  • fenderguy4life Level 1 Level 1 (5 points)
    Currently Being Moderated
    Feb 4, 2013 9:14 PM (in response to gaginker)
  • Edgar Level 3 Level 3 (980 points)
    Currently Being Moderated
    Feb 4, 2013 11:18 PM (in response to gaginker)

    It is amazin how much confusion Apple is creating with its quest for simplicity without letting the user know how the simplified stuff works.

     

    Yes, the MacBook now has only one phone jack. Yes, it has a headphone logo on it. Is it an output jack? The answer is YES and NO and IT DEPENDS.

     

    You can use it either way with an inout or out plug (TR or TRS). You tell the system in the System Preferences if you want to send audio signal into that jack or want to receive an audio signal from the that jack.

    Here is a screenshot form the System Preferences with the popup menu for Input or Output selection of the audio port.

     

    In-Out.png

     

    If you plug in your earbuds from your iPhone then all of sudden the audio port becomes an in-and-output port. The plug of the earbuds is a TRRS (Tip-Ring-Ring-Sleeve) plug that carries the input and output signal and the MacBook detects that and displays it in the System Preferences. Here is the screenshot:

     

    TRRS.png

     

    Think about it when you use your iDevices (iPhones, iPad, etc). Even if you think you plugin a headphone (output) to the jack, it is actually an in-and-output jack.

     

     

    Hope that helps

     

    Edgar Rothermich

    http://DingDingMusic.com/Manuals/

    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'


Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.