Skip navigation

time machine slow in 10.7.5

134882 Views 632 Replies Latest reply: Mar 16, 2014 8:40 PM by spadra RSS
  • Cyberspace Travel Calculating status...
    Currently Being Moderated
    Jan 20, 2013 6:55 PM (in response to Pondini)

    Thanks for the suggestion.  I resolved it on my Mountain Lion 10.8.2 system,

    without any command line hacks (since that can complicates support if

    one needs resort to it later).

     

    I realized my first priority was backups, with Spotlight indexing behind that.

     

    After reading various forums, it seemed likely that Spotlight was thwarting

    Time Machine, not the other way around.  So here's what I did:

     

    1. Went to Energy Saver preference panel and disabled automatic power off

        of system (and disk drives), until such time as the issue was resolved.

     

    2. Stopped Time Machine (since it hadn't accomplished much more

        than 4Gb in 24 hours),

     

    3. Removed Time Machine backup disk as Time Machine's backup target drive,

        effectively disabling backups (in the time machine dialog, I didn't physically

        remove any drives).

     

    4. Dragged system disk into the privacy column, in Spotlight Preferences,

        under System Preferences, which terminated Spotlight's indexing efforts

        almost immediately.

     

    5. Booted system in failsafe mode, ran disk utility, fixed permissions

        and repaired system disk, though it reported no errors.

     

    6. Rebooted Mountain Lion 10.8.2, normal mode

     

    7. Set Time Machine backup disk again.  

     

    8. Time Machine steadily backed up and completed 200Gb in 2 hours,

        never pausing for any noticeable amount of time.

     

    9. When Time Machine completed, I went back to Spotlight Preference pane,

        and removed the system disk from the privacy list.

     

    10. Spotlight started indexing, reporting a 20 minute completion estimate, within

         a few minutes of starting.  (When it was in the stuck mode, previously, it kept

         promising an estimate, but never arrived at one).

     

    11.Spotlight completed on time and both Spotlight and Time Machine

         have been working flawlessly ever since.

     

    I suspect what got me into trouble was that I used Migration Assistant

    to bring over another system.  But there was a conflict with new and old

    user names, and so I wound up renaming accounts and having to chown -R

    my home directory (I'm a unixy guy).  While I was doing that, spotlight

    was probably indexing and got confused by the way things were changing

    around beneath it.

     

     

    Message was edited by: Cyberspace Travel

  • Cyberspace Travel Level 1 Level 1 (0 points)
    Currently Being Moderated
    Jan 20, 2013 7:15 PM (in response to Larry Nolan)

    Yes, I'd already established an account with the same name as I had on the old system, on the new system, before attempting the migration, so it reported a conflict and forced me to rename the incoming account that had the data I wanted to keep, away from the original user name.

     

    So, after Migration Assistent completed, I renamed the new (empty) account out of the way, and renamed the incoming acount to its original name, and then determined the user IDs/names of the new and old users and did a chown -R of the renamed directory to match the account I'd just moved the data over to. 

     

    Not too happy about the way Migration Assistant and the Users & Groups preferance panel handled that, as it wasn't obvious how to proceed there, but my plan worked, other than thwarting Spotlight.  So all is good now.

  • Pondini Level 8 Level 8 (38,710 points)
    Currently Being Moderated
    Jan 20, 2013 7:15 PM (in response to Cyberspace Travel)

    Just for future reference, using Setup Assistant when your new Mac first starts up avoids that hassle -- since there's no user accounts on it yet, that can transfer accounts "as is."

  • Angela Mac User Calculating status...
    Currently Being Moderated
    Jan 22, 2013 1:56 PM (in response to Cyberspace Travel)

    Well done and thank you Cyberspace Travel.

    I was experienceing the same problems with my WD My Passport and Time Machine. 17 days was my estimated to back up 200GB!!

    After disabling Spotlight it backed up in just under 3 hours.

    Great :-)

  • joern42 Calculating status...
    Currently Being Moderated
    Jan 23, 2013 1:30 AM (in response to Larry Nolan)

    i deleted my free avira installation, now it works fine.

  • Thanar Calculating status...
    Currently Being Moderated
    Jan 31, 2013 12:01 PM (in response to Larry Nolan)

    Hello,

     

    I've been having speed issues lately with my Time Machine backups so ended up reading the entire thread. I think I did the supplemental update when it was issued, I am however in the same situation.

     

    My setup backs up on a network drive (USB HD connected to another iMac on the network running 10.8.2) and it's been a few days now it needs an hour for an 80MB worth of backup data. Reinstalled 10.7.5, applied supplemental update just to be sure, but things are not pregressing as expected.

     

    Will try deleting the entire Spotlight index and check again.

     

    I have also tried changing the Time machine destination using "tmutil setdestination" command to the mounted sparseimage volume and not the network drive. That way, the backup finished almost instantly, but upon changing the target back to normal (selecting the network disk through TM preferences), I am still getting very long backup times.

  • Thanar Level 2 Level 2 (290 points)
    Currently Being Moderated
    Feb 1, 2013 1:26 AM (in response to Larry Nolan)

    I should also add that, except from the backup process being very slow, I am facing great lags when acessing the backups, I have to wait a couple of minutes before I am able to navigate through time, looking at the starwars animation being able to do nothing.

  • Pondini Level 8 Level 8 (38,710 points)
    Currently Being Moderated
    Feb 1, 2013 7:39 AM (in response to Thanar)

    Try Repairing the backups, per #A5 in Time Machine - Troubleshooting.

     

    If that doesn't help, try the rest of the things in #D2 there.

  • Thanar Level 2 Level 2 (290 points)
    Currently Being Moderated
    Feb 1, 2013 11:58 AM (in response to Larry Nolan)

    I have tried all of the troubleshooting techniques in Pondini's tutorial, however I have been unable to fix the issue. The only way to make TM work as fast as it used to is to set the target to the mounted volume using tmutil setdestination. That way, both backing up and searching though the TM database works blazing fast. However, as soon as I switch back to normal (that is, setting the network drive as the destination) the whole thing becomes sluggish again.

     

    My next bet is upgrading to Mountain Lion, but I am readings about some similar issues over there, too...

  • wcrowder Calculating status...
    Currently Being Moderated
    Feb 11, 2013 2:25 PM (in response to Larry Nolan)

    I had no issues at all until I used my backup. since using it to restore the system, it takes forever to send a backup through timemachine to my external HD.

     

    should i just wait for spotlight to index my HD? im running the latest OSX. I tripple checked.

  • Csound1 Level 7 Level 7 (32,270 points)
    Currently Being Moderated
    Feb 11, 2013 2:29 PM (in response to wcrowder)

    Let Spotlight finish first.

  • wcrowder Level 1 Level 1 (0 points)
    Currently Being Moderated
    Feb 11, 2013 2:31 PM (in response to Csound1)

    Im new to Mac. How to chech the status of the indexing, and if i used my backup to restore...why was the index erased? just as easy for apple to backup up the essential stuff, and let xsx rebuild it later- i guess?

  • Csound1 Level 7 Level 7 (32,270 points)
    Currently Being Moderated
    Feb 11, 2013 2:58 PM (in response to wcrowder)

    Click on Spotlight and see if it is indexing or not.

     

    Spotlight needs to reindex the disc after a restoration, it may well be largely the same but how does Spotlight know?

     

    Be patient.

  • Pondini Level 8 Level 8 (38,710 points)
    Currently Being Moderated
    Feb 11, 2013 3:04 PM (in response to wcrowder)

    Time Machine automatically skips a number of things, including the Spotlight index, system work files, most caches and logs, trash, etc.  See the tan box in Time Machine - Frequently Asked Question #11 for the gory details.

     

    Since many or most of those change frequently, they'd have to be backed-up in full on each backup, taking time and space on the backup drive, without accomplishing much at all.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (32)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.