7 Replies Latest reply: Feb 17, 2013 12:11 PM by johnrobert1984 Branched to a new discussion.
johnrobert1984 Level 1 Level 1 (0 points)

Does aneyone no of software that you can see how hot your Processor is geting i have a g4 power pc and i have try to make the g4 cool down by adding fans but i think it still geting relly hot


Power Mac G4 (QuickSilver 2002), Mac OS X (10.4)
  • 1. Re: G4 Temp
    japamac Level 7 Level 7 (24,390 points)

    Except for the MDDs, there are no software accessible sensors in the G4 processor.

     

    One sure way to help cooling is to remove the old, baked out thermal pad and apply new thermal compound.

    Use Arctic Cooling MX-3 or MX-4 for safe, high performance thermal conductivity.

     

    My tutorial:

    9AE7FE0E-0CF2-4A7C-8003-489B282582BC.html

  • 2. Re: G4 Temp
    Jon Smith Level 4 Level 4 (1,375 points)

    I have found that the best temperature sensor for the G4 Quicksilver is your hand - placed gently on the processor heat sink. The dual processor models tend to run hot, and if your hand finds the heat sink too hot to hold onto, you may want to fit a slightly more powerful CPU fan such as the Evercool EC6025H12CA from

     

    http://www.coolerguys.com/

     

    Price is c.$6.95 +s&h, and fitting it requires replacing the stock fan inside the small black cooling shroud (several Phillips head screws) pushing the blue third wire out of the way and reversing the red and black wires in the connector that connects to the two pins on the motherboard. (This gets the ground right.)  A small pick or other small sharp pointed object - even a paperclip - is helpful.

     

    Cools it right down. I never needed it on my 933MHz QS, but my dual 1GHz seems grateful.

     

    You may also want to hold your hand behind the power supply vent just over the power cord from time to time to get a baseline on how warm your Mac is running.

     

    By all means replace the thermal compound as Japamac recommends, and blow out the dust bunnies on a regular basis.

     

    A cool Mac is a happy Mac!

     

    jws

  • 3. Re: G4 Temp
    johnrobert1984 Level 1 Level 1 (0 points)

    Thanks you all for your post I've got it cool now

  • 4. Re: G4 Temp
    japamac Level 7 Level 7 (24,390 points)

    What did you do?

  • 5. Re: G4 Temp
    johnrobert1984 Level 1 Level 1 (0 points)

    I remove the SuperDrive and put a fan in place of it the case itself has relly bad air flow all the hot air form the CPU go right in to the power supply and the fan that in the power supply I don't think it can keep up with all that heat so win put another fan it help cool down a lot better before I did this the heat inside was 150F and after I put the fan in it now 105F and the performance is a lot better

  • 6. Re: G4 Temp
    BitterCreek Level 1 Level 1 (100 points)

    Heat has nothing to do with performance. They have the same computational power at 100*c as they do at 0*c.

     

    Your G4's CPU will operate fine upto 100*c before thermal management activates self-protection (kernel panic or turning off the computer).

  • 7. Re: G4 Temp
    johnrobert1984 Level 1 Level 1 (0 points)

    Ok will I know fore a fact that the computer will not shut down if it overheat because the first time I ever pull apart the computer and put it back together I forgot to plug one of the fan in and it burn up the CPU and there is no thermal management if there was thay wood have made a gadget for it so you can see the temp and as far as it goes with performance I benchmark my computer before I put the fan in and after and the performance was a lot better and if you think about it look at the G5 and the cooling unit on it and how thay redirect the air flow