Currently Being ModeratedJan 31, 2013 2:22 PM (in response to olympusfilm)
See "The drive accepts discs but they do not mount or are automatically ejected" > http://support.apple.com/kb/HT2801
Currently Being ModeratedJan 31, 2013 2:23 PM (in response to olympusfilm)
If you are running 10.6.8, then you have Snow Leopard.
At worst you will need to take it in for service. The drive could be bad, out of alignment, or have a dirty lens.
Currently Being ModeratedFeb 1, 2013 1:26 PM (in response to olympusfilm)
Now, of course, I don't know what the problem is, but I have gotten the sense from messing around with stuff that it is not a hardware problem. I'm pretty sure that something funny happened in preferences that is making it not work. I could be wrong, but that is the sense I have gotten. So my question is more, what settings or such could have been accidentally messed up that would cause this to happen?
Currently Being ModeratedFeb 1, 2013 3:13 PM (in response to olympusfilm)
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Currently Being ModeratedFeb 4, 2013 7:44 PM (in response to Kappy)
I have two things to ask to that. First, I do not know where the installer disk would be, or even if I have it at all, so how would I accomplish that otherwise? Second, what does that fix? What is actually wrong and what does that do to fix it. Of course, this second question isn't very important as long as it fixes it, but I would like to have a better understanding of the problem.
Currently Being ModeratedFeb 4, 2013 7:53 PM (in response to olympusfilm)
You can't without an installer DVD. I don't know what is exactly wrong. All that does is reinstall OS X in case your problem is due to a corrupted system.
Currently Being ModeratedFeb 4, 2013 8:02 PM (in response to Kappy)
I was planning on updating to Mountain Lion anyway; could I get a DVD for installing Mountain Lion and do the same thing?
Currently Being ModeratedFeb 4, 2013 8:05 PM (in response to olympusfilm)
There is no Mountain Lion DVD. You purchase and download it via the App Store. You must be running 10.6.8 or later. Before you download see this:
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/
Lion application. After Mountain/Lion downloads DO NOT click on the Install button.
Go to your Applications folder and make a copy of the Mountain/Lion installer. Move
the copy into your Downloads folder. Now you can click on the Install button. You
must do this because the installer deletes itself automatically when it finishes
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
a. Open Disk Utility in your Utilities folder.
b. After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left
side list. Click on the Partition tab in the DU main window.
c. Under the Volume Scheme heading set the number of partitions from the drop down menu to one.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the
partition scheme to GUID then click on the OK button. Click on the Partition button and wait until
the process has completed.
d. Select the volume you just created (this is the sub-entry under the drive entry) from the left side
list. Click on the Erase tab in the DU main window.
e. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the
button for Zero Data and click on OK to return to the Erase window.
f. Click on the Erase button. The format process can take up to an hour depending upon the flash
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
a. Double-click on the InstallESD.dmg file to mount it on your Desktop.
b. Open Disk Utility.
c. Select the USB flash drive from the left side list.
d. Click on the Restore tab in the DU main window.
e. Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
f. Drag the mounted disc icon from the Desktop into the Source entry field.
g. Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.
As an alternative to the above (you still have to do your own download of Lion/Mountain Lion) you can try using Lion DiskMaker 2.0 that automates the process of Steps 2 through 4.
Currently Being ModeratedFeb 4, 2013 8:32 PM (in response to Kappy)
I do not believe I have a USB that's 8GB, so would it work on a SD Memory Card. Of course I could get a USB, but I have the SD card available, so that would make it easier. Also, would you be able to undo what was done to the SD card, because I use it in my camera and would need it back for that purpose after doing the above.
Currently Being ModeratedFeb 4, 2013 8:38 PM (in response to olympusfilm)
I don't know. Never tried it because I don't have a computer with an SD slot. If you know the computer will boot from an SD card, then it should work the same as on a flash drive.
Currently Being ModeratedFeb 18, 2013 11:54 AM (in response to Kappy)
My Flash drive, under volume scheme, says current, which is only one partition and is Mac OS Extended (Journaled), but I can't change the options (the botton is grayed out) because it says "Partition map scheme cannot be changed when valid partitions exist. Remove all the disk partitions and then change the partition map scheme." If I change it to one partition, it allows options to be opened up. The question is, will changing the partitions and options on the flash drive delete anything on it, because I have a lot of stuff on there that I can't move off of it?
Currently Being ModeratedFeb 18, 2013 1:51 PM (in response to olympusfilm)
Yes, if you repartition the device everything is deleted. You don't want to do that. You cannot use the device for the installer without first erasing it. Get a new flash drive if you cannot erase what you now have.
Currently Being ModeratedFeb 18, 2013 9:45 PM (in response to Kappy)
I have made my bootable installer made now, but I am still unclear on how I use this to fix the disk drive.
Currently Being ModeratedFeb 19, 2013 12:16 PM (in response to olympusfilm)
You can't fix the optical drive. But now you don't need an optical drive to install or reinstall OS X. But now you can reinstall Snow Leopard from the USB flash drive or use Disk Utility to repair the hard drive and/or permissions.