0 Replies Latest reply: Feb 19, 2013 8:21 PM by piroman611
piroman611 Level 1 Level 1 (0 points)

Hi there, I have been having problems with someone accessing my machine through the wireless bluetooth system. The logs prove it and there seem to be no way to shut down or dissable the modems. There is more than one it seems. I have reformated my drive and reloaded operaring system. As I was going throught the initial state of the machine like firewall settings printer settings and wifi, the changes that I was making were being changed back. I have checked the remote settings like the remote screen set up and and then a cell phone mac address poped up. Is there code that I can write to the EFI to not load this bluetooth because I have spent countless hours trying to figure this out. In my Sony Viao I had such a go around with this It took me almost six weeks before I gave in and took it in to the shop. Today I was setting up the home network and public came up an then 2 and 3 was below it. NTUSER.DAT is respocible and I can't get rid of that either because one is keeping the other running. Computers aren't supposed to be like this I know . IF someone could help I would appreciate all that I can get. Thanks in advance.

 

Apple Bluetooth Software Version:          2.3.7f1

  Hardware Settings:

  Address:          10-9A-DD-B8-36-42

  Manufacturer:          Broadcom

  Firmware Version:          v20 c487

  Bluetooth Power:          Off

  Discoverable:          No

  Vendor ID:          0x5ac

  Product ID:          0x8218

  HCI Version:          4 (0x4)

  HCI Revision:          487 (0x1e7)

  LMP Version:          4 (0x4)

  LMP Subversion:          16916 (0x4214)

  Requires Authentication:

Services:

  Bluetooth File Transfer:

  Folder other devices can browse:          ~/Public

  Requires Authentication:          Yes

  State:          Enabled

  Bluetooth File Exchange:

  Folder for accepted items:          ~/Downloads

  Requires Authentication:          Yes

  When other items are accepted:          Save to location

  When PIM items are accepted:          Save to location

  When receiving items:          Accept all without warning

  State:          Enabled

  Devices (Paired, Favorites, etc):

  Device:

  Name:          58-1f-aa-f5-63-d3

  Address:          58-1f-aa-f5-63-d3

  Type:          Mouse

  Services:

  Paired:          Yes

  Favorite:          No

  Connected:          No

  Incoming Serial Ports:

  Serial Port 1:

  Name:          Bluetooth-PDA-Sync

  RFCOMM Channel:          3

  Requires Authentication:          Yes

  Serial Port 2:

  Name:          SerialPort

  RFCOMM Channel:          4

  Requires Authentication:          Yes

  Serial Port 3:

  Name:          SerialPort-1

  RFCOMM Channel:          5

  Requires Authentication:          Yes

  Outgoing Serial Ports:

  Serial Port 1:

  Address:

  Name:          Bluetooth-Modem

  RFCOMM Channel:          0

  Requires Authentication:          No


Mac OS X (10.6.1), I have log files from the machine .