Skip navigation

Duplicate Project error (run out of disk memory)

582 Views 20 Replies Latest reply: Mar 9, 2013 7:50 PM by e2photo RSS
1 2 Previous Next
e2photo Level 2 Level 2 (165 points)
Currently Being Moderated
Feb 20, 2013 6:37 AM

OS 10.7.5, FCP X 10.0.7, Retina Display MacBook Pro

Internal SSD of 500 GB with 337 GB available

RAM 16 GB

 

Project is about 35 minutes of 1080p video plus music

 

Try to 'Duplicate Project' from USB 3.0 Drive (2 TB with 830 GB available)

to a 6 TB Thunderbolt drive with 4TB available.  Trying to move everything over as it will be an archive.

 

When I try to Duplicate Project, it runs for a while saying it is processing the files and the available space on the internal SSD decreases and then an errro message pops up that says the SSD is out of space, although get info says it has 273GB of space.

 

 

 

Two questions

1. What is happening?

2. Can I reconfigure FCPX to look at another drive so it does not use the internal SSD?

3. Is there a work around solution?

  • Luis Sequeira1 Level 5 Level 5 (4,855 points)
    Currently Being Moderated
    Feb 20, 2013 7:34 AM (in response to e2photo)

    Sorry if I'm stating the obvious, but...

     

    Are you positively absolutely sure you did not, by accident, try to duplicate onto the SSD instead of the TB drive?

  • Studio Engineer Level 2 Level 2 (445 points)
    Currently Being Moderated
    Feb 20, 2013 7:49 AM (in response to e2photo)

    e2photo wrote:

     

    OS 10.7.5, FCP X 10.0.7, Retina Display MacBook Pro

    Internal SSD of 500 GB with 337 GB available

    RAM 16 GB

     

    Project is about 35 minutes of 1080p video plus music

     

    Try to 'Duplicate Project' from USB 3.0 Drive (2 TB with 830 GB available)

    to a 6 TB Thunderbolt drive with 4TB available.  Trying to move everything over as it will be an archive.

     

    When I try to Duplicate Project, it runs for a while saying it is processing the files and the available space on the internal SSD decreases and then an errro message pops up that says the SSD is out of space, although get info says it has 273GB of space.

     

     

     

    Two questions

    1. What is happening?

    2. Can I reconfigure FCPX to look at another drive so it does not use the internal SSD?

    3. Is there a work around solution?

    1 = You are running out of Disk Memory

    Reasons for that:

    1 =  You have "Include Render Files" checked with the "Duplicate  Project Only" option

    2 =  You have chosen a drive that does not have enough space to accommodate the size of the project

     

    2 = YES.... In Duplicate Project dialog - right under the "New Project Name" there is a drop-down menu called "Location" there you can choose which disk to store on

     

    3 = See point 1 & 2 ;-)))

  • Studio Engineer Level 2 Level 2 (445 points)
    Currently Being Moderated
    Feb 20, 2013 8:28 AM (in response to e2photo)

    e2photo wrote:

     

    Re-Studio Engineer

    Item 2-No... it has 4TB available and why is memory decreasing on the SSD?

     

     

    I dont know... hard for me to see what you are doing there ;-) (Post a video, perhaps)

     

    The "Render" files have nothing to with event files... If you want to consolidate the Event & Project to another disk do this:

     

    Select the "Duplicate Project & Used Clips" or "Duplicate Project and Referenced Events" and then choose the right location from the drop down. It works.. At least I did one as recent as yesterday ;-)

     

    The Manual provides a good scope on the Project Duplication Options

  • Studio Engineer Level 2 Level 2 (445 points)
    Currently Being Moderated
    Feb 20, 2013 12:41 PM (in response to e2photo)

    if those are the options you are using.. There is NO excuse for writing to ANY other disk than "Movies Desk 1"

     

    I do NOT have this issue which in now way means that you dont...

     

    Please report this to FCPx feedback and give them a link to this thread...

     

    Describe Step by Step what you are doing and then show them this here image.

  • Tom Wolsky Level 10 Level 10 (104,735 points)
    Currently Being Moderated
    Feb 20, 2013 1:28 PM (in response to e2photo)

    It is strange. Try renaming the Thunderbolt drive something other than Movies, something like Juno, and see if that does anything for you.

  • Studio Engineer Level 2 Level 2 (445 points)
    Currently Being Moderated
    Feb 20, 2013 1:42 PM (in response to e2photo)

    in the permissions panel of the big drive it says fetching...... Does it ever fetch the group date (under stevenseelig)

     

    Reason I ask is that perhaps some permission on the drive got corrupted which would prevent FCPx from writing to it and perhaps making it default to the MacHD...

     

     

    Try quittin FCPx and and set the permissions on the big drive to "ignore ownership on this volume"

    (you need to tick the little check box underneath the permissions pane)

     

     

    ALSO --- Do you have another drive you could check with... Just to make sure the drive is not weird....

     

    Perhaps there is a bug in FCPx preventing from writing to a RAID (Given the nature of 6GB I am assuming it is a RAID)

  • Studio Engineer Level 2 Level 2 (445 points)
    Currently Being Moderated
    Feb 20, 2013 2:20 PM (in response to e2photo)

    Just a note to you...

     

    If one starts duplication a project and accidentally has chosen the wrong disk... One HAS to wait for the accident to complete... FCPx will not commence with duplication of a new project until it is done with the old...

  • Luis Sequeira1 Level 5 Level 5 (4,855 points)
    Currently Being Moderated
    Feb 21, 2013 1:55 AM (in response to e2photo)

    The sleepimage file is a copy of your memory that gets written to the drive to allow your mac to deep sleep (sometimes called "hibernate"). If you set your mac not to hibernate, you can the reclaim that space.

    (in regular sleep, your mac still has to use a little bit of energy to keep your ram contents "alive"; in deep sleep, your ram contents are written out to the sleepimage file, and get read back on wake from sleep; this is why sometimes a mac takes a while to go to sleep, especially if it has a slow HD and a lot of RAM; this is also why some people, like me, choose to disable it, although arguably it may be "safer").

     

    The real BIG question here is why you have all these swap files. This suggest that your real RAM gets used up, so your mac is swapping out to virtual memory - which is what is *really* using up your SSD space.

     

    Try keeping Activity Monitor open and look at the values in the memory tab. (Activity Monitor is in /Applications/Utilities; or you can hit cmd-space to access spotligt and type ac <enter>)

     

    Screen Shot 2013-02-21 at 9.53.24 AM.png

1 2 Previous Next

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.