Currently Being ModeratedFeb 26, 2013 12:40 PM (in response to Michael1611)
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Mac OS X: About the Reset Printing System feature ...
Currently Being ModeratedFeb 27, 2013 6:55 AM (in response to Michael1611)
Hi, I discovered that my printer setup utility was missing so I used Pacifist to get it from the install disk and placed it in the utilities folder.
This works in that the print prefs now see the printer but I don’t actually see the actual printer in the list of the various Canon printers in the Printer Setup tab...it has various options such as ‘Canon BJC - 3000 - Gimp-Print’.
I’ve tried various of these options but although it goes through the motions the job doesn’t print....so I’m close but no cigar just yet!
Any ideas would be very welcome...
Currently Being ModeratedFeb 28, 2013 3:38 PM (in response to Michael1611)
Mike, did it ever work in 10.4.11?
I don't see included drivers for it...
And I only find drivers for that model on Canon's site for 10.6, 10.7, & 10.8
Did you repair Permissions in 10.4.11 & reboot after any installs?
Currently Being ModeratedMar 3, 2013 4:44 AM (in response to BDAqua)
Hi, before I tried to upgrade to Snow Leopard I was running Tiger 10.4.1 but since I downgraded back it doesn’t work at all.
I have tried to download these drivers but I can’t seem to link them to my printer...
Tried the repair permissions route but that hasn’t worked either unfortunately...
Currently Being ModeratedMar 3, 2013 9:44 AM (in response to Michael1611)
Do you have an actual link to those downloads?
Just asking, once you downloaded them, did you install them?
Currently Being ModeratedMar 3, 2013 10:09 AM (in response to BDAqua)
Hi, here’s the link:
I think I installed them...but all I did was place them into the applications folder so I probably didn’t do it right?
Currently Being ModeratedMar 3, 2013 3:43 PM (in response to Michael1611)
Well, I don't see the actual file there, but look at the extension of that file, if .dmg, then double click on it to mount it, then look for an Installer or .pkg file to double click on.
Currently Being ModeratedMar 4, 2013 4:43 AM (in response to BDAqua)
Hurrah....just sorted it out!
I tried to print something and when the print dialogue box came up I added my printer again and then it allowed me to add the printer driver...which did the trick.
Thanks for all your help!
Currently Being ModeratedMar 4, 2013 9:18 AM (in response to Michael1611)
Good work, thanks for the report!
More Like This
- Retrieving data ...
- This solved my question - 10 points
- This helped me - 5 points