-
All replies
-
Helpful answers
-
Mar 9, 2013 5:53 PM in response to emailsfhby kellyfromfayetteville,Sorry - I mean update (I am not technical). I have had a couple in the past several weeks so I am assuming that one of these fixed it. I can't be sure which one as usually I charge my computer in the evening when I am working to prevent this issue but last night I had to charge it overnight and when I opened the lid this morning, to my surprise it was not in hibernation. Then this afternoon I tried it again and charged it for 7 hours and once again it was fine when I opened the lid - no hibernation. I wish I could tell you exactly which update it was.
-
Mar 9, 2013 7:17 PM in response to kellyfromfayettevilleby SwankPeRFection,Without specifying the OSX build of your system from the About screen and then also showing the PMSET settings for this, you cannot say the issue doesn't apply to you. No one knows of any recent updated that addresses this problem yet. Please share your info if possible.
-
Mar 9, 2013 7:19 PM in response to kellyfromfayettevilleby SwankPeRFection,When you opened the lid, was the system still plugged in or had you unplugged it from the charger for a few seconds and then opened it after that?
-
Mar 9, 2013 8:07 PM in response to SwankPeRFectionby kellyfromfayetteville,The first time (when it charged overnight) - it was already unplugged before I lifted the lid. This evening after it charged for 7 hours- I lifted the lid and then unplugged it.
I also never changed my PMSET settings like a good majority of you did on this discussion thread. I chose to wait and have Apple fix it. Instead, I would charge it in the evening when I was working and then unplug it before I went to bed. However, last night I was not able to do this, therefore I decided to just charge it overnight and deal with the hibernation issue this morning but to my surprise this morning, there was no issue.
Keep in mind that Apple is not admitting this is/was a known bug so with any update they are not going to specify this specifically in the update, they are going to say "fix any known bugs" like they always do with all updates.
Perhaps you should try it and see if your MacBook Pro is now operating correctly when charging for longer than 4 hours.
-
Mar 14, 2013 10:04 PM in response to kellyfromfayettevilleby emailsfh,Anyone have feedback after 10.8.3 yet?
-
Mar 15, 2013 3:12 AM in response to chocobananaby diooda,Yesterday night I instaled 10.8.3 and go to sleep. After wake up open computer and it was in hibernation. Apple doasn't fix it yet. :(
-
Mar 15, 2013 7:24 AM in response to emailsfhby SwankPeRFection,10.8.3 hasn't resolved this not will they resolve the hibernation setting. It's there for a reason. What they need to fix is the need for the system to wake when the AC adapter is plugged/unplugged from the system. As for hibernation, if you don't like it, just disable the setting via PMSET. You are allowed to do that.
-
Mar 15, 2013 7:53 AM in response to SwankPeRFectionby hockeymagnet,Exactly - I do not believe they will "fix" the hibernation issue but the wake on plug/unplug should be addressed
-
Mar 15, 2013 7:58 AM in response to hockeymagnetby SwankPeRFection,hockeymagnet wrote:
Exactly - I do not believe they will "fix" the hibernation issue but the wake on plug/unplug should be addressed
Correct because they have to leave the hibernation option in there. Honestly, this same hibernation behavior was available before this update came out. It only worked on battery power (not plugged into charger) and was called Standby in PMSET. I know this because I've used it for the past month to save battery power and go into hibernation after 1 hour of sleep on batteries. All they did after the update is also made this option available on the AC power profile when it's plugged in and called it Autopoweroff.
Bottom line, people have individual control over using or not using these hibernation settings. What they don't currently have control over is this wakeup bs behavior when these settings are enabled and the charger gets attached/detached. There is actually a PMSET setting for this behavior. It's called ACWAKE and by default it's set to 0 (i.e. disabled). The problem is that this setting is apparently ignored when Standby or Autopoweroff is set to 1 (i.e. enabled). Why? I don't know... but it's stupid and illogical.
-
Mar 15, 2013 7:58 AM in response to chocobananaby diooda,Yesterday night I instaled 10.8.3 and go to sleep. After wake up open computer and it was in hibernation. Apple doasn't fix it yet.
this is my settings and all night computer was plugged to power. What I have to do with settings?
Currently in use:
standbydelay 4200
standby 0
womp 1
halfdim 1
hibernatefile /var/vm/sleepimage
sms 1
networkoversleep 0
disksleep 0
sleep 0 (sleep prevented by 893)
autopoweroffdelay 14400
hibernatemode 3
autopoweroff 1
ttyskeepawake 1
displaysleep 0
acwake 0
lidwake 1
-
Mar 15, 2013 8:04 AM in response to hockeymagnetby emailsfh,So, without reading through this and the numerous other threads again, does anyone know how to bring back the old setting where with the charger unplugged it will still go into hibernation if the battery drains too low?
I have already done a number of the other tweaks to make this problem as minimal as possible. Here are my custom settings using the adapter and the battery:
-MacBook-Pro:~ username$ pmset -g custom
Battery Power:
lidwake 1
autopoweroff 1
autopoweroffdelay 14400
standbydelay 36000
standby 1
ttyskeepawake 1
hibernatemode 3
gpuswitch 2
hibernatefile /var/vm/sleepimage
displaysleep 10
sleep 45
acwake 0
halfdim 1
sms 1
lessbright 1
disksleep 10
AC Power:
lidwake 1
autopoweroff 0
autopoweroffdelay 86400
standbydelay 36000
standby 1
ttyskeepawake 1
hibernatemode 3
gpuswitch 2
hibernatefile /var/vm/sleepimage
womp 1
displaysleep 10
networkoversleep 0
sleep 0
acwake 0
halfdim 1
sms 1
disksleep 10
-
Mar 15, 2013 8:01 AM in response to dioodaby SwankPeRFection,Just turn off autopoweroff via the command sudo pmset autopoweroff 0. This will keep that hibernation from happening if you don't like it.
-
Mar 15, 2013 8:10 AM in response to chocobananaby diooda,What will happens whan I'll be on batterry and baterry go to discharges? computer will go to hibernation???
-
Mar 15, 2013 8:09 AM in response to SwankPeRFectionby emailsfh,Hi SwankPeRFection, my question is slightly different. I already have my autopoweroff set to 0 for AC charging and 1 for battery, and that seems to work fine (sudo pmset -c autopoweroff 0, sudo pmset -b autopoweroff 1). I guess I'm talking about the "deep sleep" (standby?) option you were talking about a few messages back where the computer will save the settings to hard drive and hibernate when the battery gets LOW. How do you set it to do this automatically at a certain percentage of the battery?
-
Mar 15, 2013 8:15 AM in response to emailsfhby SwankPeRFection,emailsfh wrote:
Hi SwankPeRFection, my question is slightly different. I already have my autopoweroff set to 0 for AC charging and 1 for battery, and that seems to work fine (sudo pmset -c autopoweroff 0, sudo pmset -b autopoweroff 1). I guess I'm talking about the "deep sleep" (standby?) option you were talking about a few messages back where the computer will save the settings to hard drive and hibernate when the battery gets LOW. How do you set it to do this automatically at a certain percentage of the battery?
That's an inherent behavior the hibernation mode you have set, which is currently 3 and it should be 3.
Fact is, Standby is hibernation for Battery profile and Autopoweroff is hibernation for AC Profile, nothing more. Ideally, the commands issued as a whole (for all profiles) if you don't want hibernation due to timeout is to just leave the delays at the default 4200 and 14400 seconds and just issue...
sudo pmset standby 0
sudo pmset autopoweroff 0
This will disable hibernation on both AC and Battery profiles and since you're not touching the hibernatemode setting, the emergency power reserve hibernation will still work when you run low on battery life.