Currently Being ModeratedOct 16, 2012 12:27 PM (in response to Stargajzer)
I appreciate your thoughtful reply - However, I'm not a newbie to all of this. An ex-Apple Systems Engineer and have had a Mac since the very first 1984 days. (Yes, I'm old!)
But for the education of those following this thread, let's walk through what was suggested.
1. The MacBooks in question work fine on my home network, wired or unwired, as well as in many businesses offering WiFi.
2. Systems are always kept up to date - latest version of Mountain Lion on all machines.
3. Familiar with the authentication phase you describe - however, the problem occurs when I attempt to connect to that retailer's network using either the Network pane of the System Preferences application or by using the WiFi config option in the menu bar. The system won't stay on the selected network - that's when I get the "Connection Timeout" error has occurred. The system then goes back to having NO WiFi network selected. So I can't get to the retailer's landing page to agree to anything.
Coincidently, I will sometimes have a problem with my 3rd generation iPad also failing to connect to these same problemmatic networks.
Still scratching my head!
Currently Being ModeratedDec 1, 2012 3:56 AM (in response to nashman)
Hi, I was also having this issue with my mid 2010 MBP after Sky upgraded my router with a 802.11n comaptible model.
the solution turned out to be something i'd seen suggested on an Xbox forum years ago when problems occured connecting to 802.11g routers.
go into your routers setup and locate the advanced settings.
find the option for UPNP and disable it.
as soon as i turned of UPNP my Mac book Pro signed onto the wifi first attempt.
Currently Being ModeratedDec 28, 2012 3:56 PM (in response to SCCThreeIII)
We have 3 macs and all of them have the same problem. Aside from the many solutions recommended here we also tried upgrading our 1 year old Netgear to the latest Cisco wi-fi router -- and still encountered exactly the same issue. Non-mac clients seem to be fine.
Currently Being ModeratedDec 31, 2012 10:32 AM (in response to Starr_fire)
Had the same problem with Cisco AP's and OSX. I noticed everthing was fine until I changed from WEP to WPA2. Did everything I seen in these post then I noticed that I only had the problem with AP's that were 2.4GHz. The AP's with dual radios of 2.4GHz and 5GHz have no problem. The connections at 5GHz are working solid now that I have replaced all the APs.
Currently Being ModeratedJan 3, 2013 11:14 PM (in response to screamingmeanie)
Me again. I just kept dealing with the problem. I'd always get on....might take a minute or so, but I'd get on.
Problem finally solved itself when I got a new modem. Boom badda bing. Problem solved. A joke that it has to be this way, but sometimes the best solution is just dump the old equipment I guess. Good luck to everyone deciding NOT to do that.
Currently Being ModeratedJan 4, 2013 7:52 PM (in response to screamingmeanie)
Forget THAT last solution.
Starting up the network after the computer goes to sleep leads to various failures to connect with aforementioned manueuvers to finally get it to connect (including the ALWAYS successful shut down and restart...ugh!)
My first real crummy problem with my Mac.
Snow leopard reliability is missed.
Currently Being ModeratedJan 17, 2013 5:14 PM (in response to SCCThreeIII)
I have a solution which works for me. Follow these steps:
- Wire your computer into the router with an ethernet cable.
- Figure out the IP address of your gateway router
- Open Terminal
- Type this command: route -n get default
- The IP address next to gateway is your gateway IP address
- Open your web browser
- Go to http://192.168.0.1 (replace 192.168.0.1 with your gateway IP)
- Log into the router. If you don't know the username / password, look on the bottom of your router or contact your ISP
- Now you want to go into the wireless setup utility on the website and change the radio to use a specific channel ranging from 1 to 11 instead of using auto.
Currently Being ModeratedJan 17, 2013 5:54 PM (in response to Paul Verschoor)
As i wrote in another thread, please read this, hope it will help you.
I've had the same problem with my Macbook Pro, and also with my iPhone 5, couldnt connect to Wifi.
After I spent days to finding the solution, you can't imagine what caused this problem. I'm using since a few weeks an A/V transceiver to send audio video signal to one room to another. Its operating on 2.4 GHz, and unfortunately it was set to the same channel which was selected automaticly by the router...
After 2 seconds, when I pulled out the power plug from the transceiver, both MAC and iPhone has been joined to the Wifi without any error. I plugged the power back, both lost the connection, and couldnt connect back.
So probable there was some interference between the router and the transceiver device, and probably at you also, Maybe a lots of router or AP using that same channel range which youre router want to use, or some other device in youre area causing some interference.
Try to select another channel in youre router Wifi configuration, if isnt working, try another, and another, if you find a clear channel, it should solve youre problem also, like my.
Currently Being ModeratedJan 17, 2013 6:08 PM (in response to RNDRND)
By the way, since yesterday, after I unpowered the AV device, which caused the interference, both Mac and iPhone are on the Wifi, without any error.
Its funny, because my friends Samsung phone never have got connection problems to my Wifi...
Probably Apple's procedure to build up a wifi connection is to sensitive for any occured problem in the line, and rather drops the line and wouldnt build an uncertain connection...
Currently Being ModeratedJan 18, 2013 2:26 PM (in response to wifiguru)
MAXIMUM digital technology
Model No.: AV-T2G4B
If you type the model no in Google picture search, u will find it on the first three photo.
But i dont think this is about the device, its more like the configuration of the devices.
Currently Being ModeratedFeb 10, 2013 9:27 AM (in response to SCCThreeIII)
Been fighting this error for over a week now..... Have two iMacs two iPhones 4&5 and a dell netbook only one that has this problem is the older iMac which is only 3 y/o.... I've restarted every thing a dozen times and something finally works but it is getting to the point I am about to plug back in the ethernet cable on that one and say I'm tired of playing this game!!!! Please Apple, get a fix for this problem.
Currently Being ModeratedMar 9, 2013 8:20 AM (in response to SCCThreeIII)
I dealt with this for over a month
After trying everything mentioned in these posts, what worked for me is setting the "Channel" of my 5GHz network to a specific channel rather than using "Auto"
After that, my MacBook Pro connects quickly everytime
Currently Being ModeratedApr 4, 2013 3:54 AM (in response to screamingmeanie)
You can find it in the settings of your Airport. In the Airport configuration utility, go to 'wireless', then choose 'wireless options'. Setting the channels of the network (instead of auto) fixed my issue with not being able to connect. For now... I would appreciate an update of the config util, where one can choose a channel that is 'available'.