HT4589: Final Cut Pro X: Version 10.1.1 release notesLearn about Final Cut Pro X: Version 10.1.1 release notes
Currently Being ModeratedMar 19, 2013 2:49 AM (in response to Tom Wolsky)
I discover a bug in 10.0.7, when you want to use your external hard disk, if you have some photo folders in root directory, you cannot open your projects and create new. Is a several bug, because I undertood this is a global problem affecting a lot of people. I supose, in the 10.0.7 version, internal programming connect our external hard disks like a sd card or camera, when you have folders, i root directory, with photos or video clips. This is all
Put all your photo and camera or clip folders in a subfolder from your external harddrive and you can use it again . In fact if you have a Events and Project folders, will be works again. The problem it´s only the photo and videos folders from root directory
I expect new patch from Apple
Currently Being ModeratedMar 19, 2013 4:40 AM (in response to Fremmenn)
This isn't a bug. FCP is treating the drive as a camera because it sees content that appears in the form of a camera drive. There is no way for the application to distinguish this if this content is at the root level of the drive.
Currently Being ModeratedApr 1, 2013 11:39 PM (in response to yomfer04)
Hi, Need help here
USB connected external Hard disk not recognize,
on rMBP 15" 2,6 Ghz, 10.8.4 ML (10.8.3 not work too)
Patriot Gauntlet 2 usb 3.0 hdd enclosure
HDD Toshiba 1 TB
HDD Toshiba works when I put in other USB 2.0 HDD Enclosure, but not in Patriot Gauntlet 2 USB 3.0.
another HDD not works too in PGauntlet2 (I think problem in PGauntlet2), cause
PGauntlet2 Led indicator blink once Sometimes led flashing with dim, then nothing happen.
But, on bootcamp Windows 7 or Windows PC based. PGauntlet2 works fine with USB 3.0 performance,
I though ML 10.8.x not powered enough for USB 3.0 not likes Windows.
How to solve this,
Thanks for adviceMacBook Pro with Retina display, OS X Mountain Lion (10.8.3)
Currently Being ModeratedApr 2, 2013 1:32 AM (in response to abdullatif_arch)
Do the drives appear in the Finder when in the USB3 enclosure?
Is it connected only via USB, or does it have an external power supply? If the problem is that the USB port on the mac does not provide enough power, you'll have to connect the external power supply, if available, or else use an "Y" cable to draw power from two USB ports at the same time.
Currently Being ModeratedApr 2, 2013 2:10 AM (in response to Luis Sequeira1)
Thank Luis for your quick reply,
drivers doesn't appear in Finder or Disk Utilty.
Enclosure only have one port for USB 3.0.
I don't have Y cable for test, but rMBP only have two USB 3.0 port opposite each other. Hope I find Y cable can reach ports with USB 3.0 plug, soon I'll try it.
Is there any way how to modify registry or something like that for give USB 3.0 power 500 mA more, or let apple do it for next update 10.8.4
Sorry I was wrong on post before:
on rMBP 15" 2,6 Ghz, 10.8.4 ML (10.8.3 not work too) Should be
on rMBP 15" 2,6 Ghz, 10.8.3 ML (10.8.2 not work too).
Currently Being ModeratedApr 2, 2013 2:25 AM (in response to abdullatif_arch)
The USB3 ports on the rMBP should be providing power according to specs. I don't know this enclosure you are using. It would be instructive to test this with the proper equipment, to figure out what is at fault. If you could take your mac to a genius bar, they could probably test to see if the ports are providing the right amount of power.
Currently Being ModeratedMay 4, 2013 1:52 AM (in response to abdullatif_arch)
SOLVED with new replacement from patriotmemory, after discussion and following instruction, they put my problem as RMA, now it's works great.
Thanks for all:
USB 3.0 SuperSpeed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBXHCI
PCI Device ID: 0x1e31
PCI Revision ID: 0x0004
PCI Vendor ID: 0x8086
Bus Number: 0x14
Product ID: 0x6518
Vendor ID: 0x11b0 (ATECH FLASH TECHNOLOGY)
Serial Number: 0CB11FFF0000000000002681
Speed: Up to 5 Gb/sec
Location ID: 0x14900000 / 2
Current Available (mA): 900
Current Required (mA): 224
Capacity: 640,14 GB (640.135.026.688 bytes)
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk1
Partition Map Type: MBR (Master Boot Record)
S.M.A.R.T. status: Not Supported
Capacity: 640,13 GB (640.132.383.744 bytes)
Available: 451,46 GB (451.461.787.648 bytes)
File System: NTFS
BSD Name: disk1s1
Mount Point: /Volumes/640GB