Skip navigation

Best settings for VHS capture

579 Views 4 Replies Latest reply: Mar 19, 2013 3:38 PM by phase52010 RSS
phase52010 Level 1 Level 1 (10 points)
Currently Being Moderated
Mar 19, 2013 2:33 PM

A friend has given me the VHS camera tapes of his wedding and asked if I can "do something with them".


I have my (JVC) VHS deck connected to an old Sony Digital 8 camcorder which I use to pass through the analogue signal so I can capture it via firewire.

The D8 (Sony DCR-TRV240E) also does a nice job in cleaning up the signal. I've had a VHS tape that was unwatchable until I passed it through the D8.


I'll be using FCP7 to capture the video and generally I just use "DV-PAL kHz 48" (I'm in a PAL country) from the "Easy Setup" options as it's the one I've always used. Results have always been fine.


It's been suggested to me that "DV-PAL kHz 48" is "lossy". Not that I've ever noticed it.


As it's a friends wedding video and I only want to do this once, would another capture setting - technically - give better results? Even with VHS.


Thoughts and suggestions most welcome.

Thanks in advance.

Mac mini, Mac OS X (10.7), Netcomm NB6PLus4w Modem
  • Shane Ross Level 8 Level 8 (41,650 points)
    Currently Being Moderated
    Mar 19, 2013 2:48 PM (in response to phase52010)

    If you are connected via Firewire, that is your only option...DV PAL.  Your BEST bet would be to run it through a TBC and capture via a higher end card like the AJA LHi....capture as ProRes PAL or DV50 PAL.  But, seeing as you only have that camera..DV is your better bet.  DV was a superior format to VHS you are going up in quality.  But you are starting out low in quality, and anything you do to capture this footage will be compressing it. 


    There is no other capture setting that will work with your current setup.

  • Shane Ross Level 8 Level 8 (41,650 points)
    Currently Being Moderated
    Mar 19, 2013 3:37 PM (in response to phase52010)

    None of those other options will work with what you have.  DV50 is specific to Panasonic DVCPRO 50 cameras....DVCPRO (also Panasonic) is a separate, but very similar format to DV format....and you cannot capture IMX nor Uncompressed.  You are left with DV/PAL.


More Like This

  • Retrieving data ...

Bookmarked By (0)


  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.