Hi, as long as they're the same bus speed should be n problem.
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
How to find the serial number of your Apple hardware product...
The bus speeds are the same 167MHz, and both machines are duel's.
However if the 1.25GHz processor is bad would it damage the working 1GHz motherboard?
I would hate to damage a "MINT" Power Mac G4 1GHz DP MDD
Again Thanks In Advance!
Wow your all great with the responses.
Here is my game plan:
#1. I did pick-up some Arctic Silver 5 today, however I have never done this before. Arctic's web site really is geared to the pc side of things. Can someone provide me more info using this thermal grease on Power PC chips?
#2. What should I clean the Power PC chips with?
#3. Swap the cards and cross my fingers.
#4. I will post and let everyone know how this all works out.
Thanks so much everyone, the Apple Community is the best!
Sadly, japamac has been chased off byi nsults, but...
Thought I would update everyone on this.
Installed to 1.25 DP and it has worked fine.
Did a fresh install of Leopard + all updates, didn't install anything else
Played with it as-is to verify stability, (ie) sleep , safari
CPU's running fight now at 119 Deg. Is this OK?
Put system to sleep and tryed to wake up and got the following "Panic"
Specs on the hardware are at the bottom.
Can someone tell me what happened?
Interval Since Last Panic Report: 9966 sec
Panics Since Last Report: 1
Anonymous UUID: 9F2B750D-3091-48B2-9DED-A2E33946B13A
Thu Apr 4 16:13:55 2013
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000E5C PC=0x00000000000AC6B8
Latest crash info for cpu 0:
Exception state (sv=0x18cfe000)
PC=0x000AC6B8; MSR=0x00001030; DAR=0x00000E5C; DSISR=0x40000000; LR=0x000AC604; R1=0x1D82FCD0; XCP=0x0000000C (0x300 - Data access)
0x01F96E18 0x0002E14C 0x0003B264 0x0005813C 0x0002C100 0x00024B58
Proceeding back via exception chain:
Exception state (sv=0x18cfe000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x1d7a9000)
PC=0x907B5078; MSR=0x0200F030; DAR=0xE0014000; DSISR=0x42000000; LR=0x907BBFA0; R1=0xBFFFEE60; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: iStatLocalDaemon
Mac OS version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:57:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_PPC
System model name: PowerMac3,6
System uptime in nanoseconds: 3925799583047
com.apple.driver.AppleFCU 1.3.2b0 - last unloaded 4064650090
com.apple.filesystems.autofs 2.0.2 - last loaded 1271375364
Model: PowerMac3,6, BootROM 4.4.8f2, 2 processors, PowerPC G4 (3.3), 1.25 GHz, 768 MB
Graphics: kHW_NVidiaGeForce4TiItem, GeForce4 Ti 4600, spdisplays_agp_device, 128 MB
Memory Module: DIMM0/J21, 256 MB, DDR SDRAM, PC2600U-25330
Memory Module: DIMM1/J22, 512 MB, DDR SDRAM, PC2600U-25330
Modem: Dash2, UCJ, V.92, 1.0F, APPLE VERSION 2.6.7
Network Service: Ethernet, Ethernet, en0
Parallel ATA Device: PIONEER DVD-RW DVR-115D
Parallel ATA Device: ST3160023A, 149.05 GB
USB Device: Apple Optical USB Mouse, (null) mA
USB Device: Hub in Apple Extended USB Keyboard, (null) mA
USB Device: Apple Extended USB Keyboard, (null) mA
I have not had luck with waking up from sleep mode (in my G3 and G4) and I have absolutely no idea why. I changed my energy saver preferences settings to never sleep and never put the hard drives to sleep, I only use the screen saver. Possibly the hard drive or a PCI/USB/FW peripheral doesn't wake up when it should and then the machine panics? I have no diagnosis or solution to the wake-from-sleep issue, other than to never sleep.
Just a update and observation.
I removed iStat will try later this morning how it handles sleep now.
My experience with sleep on these systems are if you have additional PCI card installed that generaly is the reason they fail to go to sleep on therir own, or create a kernal panic when forced to sleep by using the "Sleep Now" drop down menu. Clearly non Apple software can create issues with sleep.
Because this has a virgin system install only, I want to verify everything is top-notch before I install anything else.
See I purchased a new 1.25Ghz DP (MDD) in Spring of 2003, It got damaged in 2007 but I saved everything I could (guts wise, ie: GForce Ti Video Card, Hard Drives) and all the original manuals & discs the only thing I tossed was the box.
I will try the motherboard from the doner machine soon, the one I got the processors from. I noticed that board has a Bluetooth connection (Motherboard # 820-1474-A) does anyone know where I might get the Bluetooth Module for it? It the connection on the board next to the Airport Card.
Thanks Again Everyone!
More Like This
- Retrieving data ...
- This solved my question - 10 points
- This helped me - 5 points