Skip navigation

HT4279: Mac Pro (Early 2009), Mac Pro (Mid 2010), Mac Pro (Mid 2012): Supported display configurations

Learn about Mac Pro (Early 2009), Mac Pro (Mid 2010), Mac Pro (Mid 2012): Supported display configurations

HT4279 Setting up 3 monitors

1151 Views 5 Replies Latest reply: Apr 9, 2013 5:41 PM by Malcolm J. Rayfield RSS
mikimouse129 Calculating status...
Currently Being Moderated
Apr 9, 2013 12:50 PM

I'm trying to set up 3 monitors on MacPro.

We have a right graphics card for 3 monitors (ATI Radeon HD 5870), but when I connect all three, DVI doesn't work.

DVI cable is connected to HDMI with an adapter.

The third monitor we are using through DVI/HDMI is Sony Bravia 46".

 

I checked the support and it says DVI Display needs to be 30-inches or smaller.

What if third monitor is bigger than 30-inches? What kind of adapter do I need to get?

 

Thank you for your help in advance!

Mac Pro, Mac OS X (10.6.8)
  • The hatter Level 9 Level 9 (58,545 points)
    Currently Being Moderated
    Apr 9, 2013 12:58 PM (in response to mikimouse129)

    You did read the apple support doc? It talks about 30-inch monitor resolution, and for high resolution you need dual link active DVI.

     

    I notice you don't  mention the size and resolution of the others, and your HDMI is limited to 1080 so not an issue as long as proper adapter.

     

     

    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)

    http://support.apple.com/kb/HT3382

    Guide to Apple graphic display adapters needed

    https://support.apple.com/kb/HT3235

    Atlona (Dual Link) DVI to Mini DisplayPort Converter for Apple 27-inch LED and 27-inch iMac

    http://www.atlona.com/Atlona-Dual-Link-DVI-to-Mini-DisplayPort-Converter-USB-Pow ered.html


    Mac Pro (Early 2009), Mac Pro (Mid 2010), Mac Pro (Mid 2012): Issues with three displays and multiple DVI, HDMI connections

    It's not the USB data that is needed to run three displays. It's the extra POWER. If you read the Apple article, they say the only solution they endorse is their US$100 Dual-Link adapters. Check the table at the end of the article.

    Mac Pro (Early 2009), Mac Pro (Mid 2010): Supported display configurations

    Readers here have found that if you have two Brand-X Powered adapters, aka active adapters, it also works fine. These do not always require another USB. If designed recently, they can pick up a power pin in the Mini DisplayPort interface.

    AMD (makers of the 5770 and 5870) lists the qualified POWERED adapters that meet their most stringent requirements. Look down the page and you will find several qualified Active Mini DisplyPort to various others, such as HDMI. These adapters are available from other outlets, such as Amazon, sometimes for far less than the Apple adapters.

    http://support.amd.com/us/eyefinity/Pages/eyefinity-dongles.aspx

    The other desktop monitor will plug directly into the DVI port on the card and the 40 inch tv will still connect via HDMI over the second Mini Display port.

    That will work only if you use an active Mini DisplayPort to HDMI adapter.

    The only (someone) have found to work (2009)

    http://www.alibaba.com/product-gs/337561577/miniactive_display_port_tohdmi.html

    but you should confirm that they are really active before buying 500 of them.

    You can connect a DVI to HDMI adapter or cable to an active Mini DisplayPort to DVI adapter but that won't give you any audio over HDMI. You could connect the DVI displays to the Mini DisplayPorts with active adapters and use a DVI to HDMI cable or adapter from the DVI port to the TV.

    If you want audio via HDMI, you can use audio from the Mac Pro's optical output with this DVI to HDMI converter:

    http://www.apogeeinc.net/products/item.aspx?item=2745

  • Grant Bennet-Alder Level 8 Level 8 (48,110 points)
    Currently Being Moderated
    Apr 9, 2013 1:39 PM (in response to mikimouse129)

    I checked the support and it says DVI Display needs to be 30-inches or smaller.

    What if third monitor is bigger than 30-inches?

    A TV set is not a Monitor. An HDMI TV 1080p is only 1920 by 1080, so it does not even need Dual-Link.

     

    Do you even have a Monitor over 1920 wide?

    Mac Pro (Early 2009), Mac OS X (10.6.8), & Server, PPC, & AppleTalk Printers
  • Grant Bennet-Alder Level 8 Level 8 (48,110 points)
    Currently Being Moderated
    Apr 9, 2013 2:16 PM (in response to mikimouse129)

    You only REQUIRE Dual-Link DVI adapters when your displays are wider than 1920 pixels wide.

     

    What is in short supply is Power to run signal Boosters from converted Mini DisplayPort to DVI (or its re-wire, HDMI).

     

    What you NEED is two ACTIVE Mini DisplayPort adapters. Apple's only ACTIVE adapter is their excellent Dual-Link DVCI at the amazing US$100 price-point.

     

    But ACTIVE Mini DisplayPort to Single-Link DVI adapters are available for US$35 to $40 from sellers such as Amazon and NewEgg from Accell and Startech:

     

    Adapts:  Mini DisplayPort™   To:  DVI-D Single Link (Active Adapter)
    ManufacturerPart NumberFirmwareMax. ResolutionPurchase
    AccellB087B-006B0.951920x1200Buy Now
    Astron3411020-090-H0.951920x1200Buy Now
    BizlinkKS30015-1310.951920x1200
    StartechMDP2DVIS0.951920x1200Buy Now
    WiesonG9858C219-006-H0.951920x1200Buy Now

     

    source:

    http://support.amd.com/us/eyefinity/Pages/eyefinity-dongles.aspx

    Mac Pro (Early 2009), Mac OS X (10.6.8), & Server, PPC, & AppleTalk Printers
  • Malcolm J. Rayfield Level 5 Level 5 (4,500 points)
    Currently Being Moderated
    Apr 9, 2013 5:41 PM (in response to mikimouse129)

    There are now active Mini DisplayPort to HDMI adapters

    <http://ca.startech.com/AV/Displayport-Converters/Mini-DisplayPort-to-HDMI-Active -Video-and-Audio-Adapter-Converter-Mini-DP-to-HDMI-1920x1200~MDP2HDS>

     

    Apple is suggesting the dual-link DVI adapters because they don't sell active single-link DVI or HDMI adapters.  If your display resolution is not over 18920 x 1200, dual-link is not needed if you get non-Apple active adapters, and you will save money and not tie up extra USB ports.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.