Skip navigation

Beach-balling, but memory not the problem. What could be causing it??

249 Views 9 Replies Latest reply: Apr 10, 2013 8:01 PM by Kappy RSS
Mashintoc Calculating status...
Currently Being Moderated
Apr 10, 2013 7:28 PM

Screen shot 2013-04-10 at 9.59.27 PM.png

 

The beach-ball is haunting me 3-4 times hourly. It started about 2 weeks ago. The info shown in Activity Monitor make me think that the problem is not memory-related; if I am wrong, please post and include any possible solutions you might know of. What other issues can cause it to freeze so often?

 

It's a MacBook 7,1...if that means anything.

MacBook, Mac OS X (10.6.8)
  • Kappy Level 10 Level 10 (221,035 points)

    Things You Can Do To Resolve Slow Downs

     

    If your computer seems to be running slower here are some things you can do:

     

    Start with a visit to: OS X Maintenance - MacAttorney.

     

    Boot into Safe Mode then repair your hard drive and permissions:

     

    Repair the Hard Drive and Permissions Pre-Lion/Mountain Lion

     

    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.

     

    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

     

    Repair the Hard Drive - Lion/Mountain Lion

     

    Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.

     

    Boot to the Recovery HD:

     

    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.

     

    Restart your computer normally and see if this has helped any. Next do some maintenance:

     

    Suggestions for OS X Maintenance

     

    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.

     

    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.

     

    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.

     

    I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.

     

    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.

     

    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.

     

    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):

     

      1. Carbon Copy Cloner

      2. Data Backup

      3. Deja Vu

      4. SuperDuper!

      5. SyncTwoFolders

      6. Synk Pro

      7. Synk Standard

      8. Tri-Backup

     

    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.

     

    Additional suggestions will be found in Mac maintenance Quick Assist.

     

    Referenced software can be found at CNet Downloads or MacUpdate.

     

    Additional Hints

     

    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.

     

    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.

     

    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.

     

    Check for applications that may be hogging the CPU:

     

    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.

     

    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • Bimmer 7 Series Level 6 Level 6 (10,265 points)

    In your activity monitor - change My Processes to All processes - see what's using 10% and up in your %CPU section - hightlight it and hit quit process and see if that helps you out.

     

    also check your login items - delete anything you don't need to load on start up

     

    good luck

  • Kappy Level 10 Level 10 (221,035 points)

    The right way to do that is:

     

    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.

     

    But the likelihood this is an issue would be mostly evident by overheating rather than beachballing.

  • Kappy Level 10 Level 10 (221,035 points)

    Visit The XLab FAQs and read the FAQ on troubleshooting the SBOD issue for possible solutions.

  • Bimmer 7 Series Level 6 Level 6 (10,265 points)

    Try doing a SMC RESET - doing so also improves your Macbook's performance - if you have issues.

     

    Read the whole thing and do it if you think it applies to your case.

     

    That might do it for you.

  • Kappy Level 10 Level 10 (221,035 points)

    Mostly except you boot from an installer DVD:

     

    Repair the Hard Drive and Permissions

     

    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.

     

    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.


    I also suggest looking in your Console application - Utilities folder - for frequently repeating entries. Could be the sign of a cache, plist, temp file sort of problem causing the computer to respond slowly because of heavy disk usage.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (1)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.