Skip navigation

iPhoto won't Clos

368 Views 6 Replies Latest reply: Apr 20, 2013 10:19 PM by Waltherp99 RSS
Waltherp99 Calculating status...
Currently Being Moderated
Apr 20, 2013 3:32 AM

For weeks now I have trouble closing iPhoto, either manually or as a result of a Restart. Any ideas other than deleting the iPhoto database?

iMac (27-inch Late 2009), OS X Mountain Lion (10.8)
  • Paul_31 Level 6 Level 6 (12,165 points)
    Currently Being Moderated
    Apr 20, 2013 3:35 AM (in response to Waltherp99)

    Have you tried the steps in this knowlege-base article?

    http://support.apple.com/kb/HT2638?viewlocale=en_US&locale=en_US

     

    Also, if the application re-opens on restart it's probably because 'resume' is enabled. If you deslect the tick as shown in the image on shutdown/restart it should prevent iPhoto re-launching.

     

    Screen Shot 2013-04-20 at 12.35.09.jpg

  • Paul_31 Level 6 Level 6 (12,165 points)
    Currently Being Moderated
    Apr 20, 2013 5:16 AM (in response to Waltherp99)

    Have you checked your HD doesn't need repairs using the Recovery HD. Restart holding down Command-r, select Disk Utility, click on Macintosh HD and click 'repair disk'. If anything gets changed click on repair disk again until you get a clear pass and then restart as normal from the Apple menu.

  • Old Toad Level 10 Level 10 (113,150 points)
    Currently Being Moderated
    Apr 20, 2013 9:28 AM (in response to Waltherp99)

    Two ways to get iPhoto to close:

     

    1 - Force quit:

    Forcequit.PNG

     

    2 - open the Terminal application and enter the following:

    killall iPhoto

    The second method is preferred as it will close all files that were open whereas a force quit doesn't.

     

     

    Now if iPhoto hangs again launch iPhoto with the Option key held down and create a new, test library.  Import some photos and test to see if the same problem persists. It the new library does not hang your current library is the culprit and needs to be repaired.

     

    Apply the two fixes below in order as needed: 

     

    Fix #1

     

    Launch iPhoto with the Command+Option keys held down and rebuild the library.

     

    iP93rebuild.PNG

     

    Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.

     

    Fix #2

     

    Using iPhoto Library Manager  to Rebuild Your iPhoto Library

     

    1 - download iPhoto Library Manager and launch.

     

    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.

     

    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.

     

    4 - In the next  window name the new library and select the location you want it to be placed.

     

    5 - Click on the Create button.

     

    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

     

     

     

    OT

  • Linc Davis Level 10 Level 10 (107,660 points)
    Currently Being Moderated
    Apr 20, 2013 5:01 PM (in response to Waltherp99)

    Please read this whole message before doing anything.

    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.

    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.

     

    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem.  Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
       
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.

    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.

     

    Test while in safe mode. Same problem?

     

    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.