2 Replies Latest reply: Apr 23, 2013 12:42 PM by JoeyR
kelroc98 Level 1 Level 1 (0 points)

Hello:

I installed MacBook Pro SMC Firmware Update 1.4 - I keep going thru the steps below and it won't update.  Please help.  Thanks a bunch!!!

Kelly Peterson

 

To update the SMC firmware on your MacBook Pro:

 

Your computer's power cord must be connected and plugged into a working power source, or your battery must be at least 25% charged.

 

For more information see 'http://support.apple.com/kb/TS3499'.

 

1. Quit all other open applications.

 

2. Click Restart in the MacBook Pro SMC Firmware Update window and wait for your computer to restart.

 

The SMC firmware update starts automatically. A status bar indicates the progress of the update. During the update your computer fans will run at full speed, but will return to normal once the update completes.

 

Important: Do not interrupt the update.

 

Your computer restarts automatically when the update is completed and opens the MacBook Pro SMC Firmware Update.

 

3.  Click OK. The SMC firmware is now up-to-date.

 

If these instructions appear on your screen again, the SMC firmware update was not successful. Repeat steps 2 and 3.


MacBook Pro, Mac OS X (10.5.8)
  • 1. Re: firmware won't update on my computer
    Eric Root Level 6 Level 6 (16,220 points)

    Try booting into the Safe Mode and then installing the update.  Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.

                   

    Safe Mode

     

    Safe Mode - About

  • 2. Re: firmware won't update on my computer
    JoeyR Level 6 Level 6 (8,275 points)

    You probably made sure to do this anyway (as it's in the instructions you posted)... but be sure your machine is plugged in when you try to install it.  It won't intall otherwise.