Skip navigation

Software not updating

737 Views 8 Replies Latest reply: Apr 18, 2014 7:53 PM by drevicko RSS
stewjohn Level 1 Level 1 (0 points)
Currently Being Moderated
Dec 15, 2012 2:49 PM

I got a new Imac about four months ago and it keeps telling me that I have a software update.  When I clik for it to update it says that an error has occurred and the operation was cancelled.  I bought this about 100 days ago and Apple wants to charge me $20 to help fix the problem.

iMac, OS X Mountain Lion (10.8.2)
  • seventy one Level 6 Level 6 (8,560 points)
    Currently Being Moderated
    Dec 15, 2012 3:10 PM (in response to stewjohn)

    Support for a new product is limited to 90 days, I believe.   If you have Apple care that would have avoided the charges.

     

    But you may be lucky.   Someone here may recognise the situation and offer a solution through these columns.

  • den.thed Level 7 Level 7 (23,410 points)
    Currently Being Moderated
    Dec 15, 2012 3:45 PM (in response to stewjohn)

    Can you be more specific about what the error message said...?

     

    For more, see > OS X: Updating OS X and Mac App Store apps

  • Linc Davis Level 10 Level 10 (108,120 points)
    Currently Being Moderated
    Dec 15, 2012 5:03 PM (in response to stewjohn)

    If you have more than one user account, these instructions must be carried out as an administrator.

    Launch the Console application in any of the following ways:

    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)

    ☞ In the Finder, select Go Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.

    Select "/var/log/install.log" from the file list. Post the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time.

    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

    When posting a log extract, be selective. Don't post more than is requested.

    Please do not indiscriminately dump thousands of lines from the log into a message.

     

    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Linc Davis Level 10 Level 10 (108,120 points)
    Currently Being Moderated
    Dec 16, 2012 9:12 AM (in response to stewjohn)

    Please read this whole message before doing anything.

    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.

    The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login.

     

    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    • Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    • When you see the gray Apple logo, release the shift key.
    • If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.

     

    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. If you connect to your router via Wi-Fi, you may need to use Ethernet.

    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.

     

    Test while in safe mode. Same problem?

     

    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • klv73 Calculating status...
    Currently Being Moderated
    Apr 25, 2013 8:17 PM (in response to stewjohn)

    I get exactly the same message in my new iMac and the old one at my office.

     

    The operation was cancelled.(3072)

     

    This is got to be some bug. Hopefully Apple will do something about it soon.

    It is annoying.

  • klv73 Level 1 Level 1 (0 points)
    Currently Being Moderated
    Apr 25, 2013 8:53 PM (in response to stewjohn)

    ...all you need to do is Quit or ForceQuit Safari before you install.

     

    Regards.

  • drevicko Calculating status...
    Currently Being Moderated
    Apr 18, 2014 7:53 PM (in response to stewjohn)

    I found that safari was running under a different user, causing this problem.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.