1 Reply Latest reply: Apr 27, 2013 10:22 AM by Kappy
camilobog Level 1 Level 1 (0 points)

My hard disc crashed so I installed a new one

I tried to run it from installation disc but could not

Finally I used time machine.

My system is restored, but now I cannot eject installation disc

Have tried already turning on computer pushing eject button, and also pushing

trackpad without success.

What else can I do?


MacBook Pro, OS X Mountain Lion (10.8.3)
  • 1. Re: CAN´T EJECT my disc after reinstalling os x
    Kappy Level 10 Level 10 (226,775 points)

    Five ways to eject a stuck CD or DVD from the optical drive

     

    Ejecting the stuck disc can usually be done in one of the following ways:

     

      1. Restart the computer and after the chime press and hold down the

          left mouse button until the disc ejects.

     

      2. Press the Eject button on your keyboard.

     

      3. Click on the Eject button in the menubar.

     

      4. Press COMMAND-E.

     

      5. If none of the above work try this: Open the Terminal application in

          your Utilities folder. At the prompt enter or paste the following:

     

            /usr/bin/drutil eject

     

    If this fails then try this:

     

    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

     

    I would recommend you reinstall OS X as well:

     

    Reinstalling Lion/Mountain Lion Without Erasing the Drive

     

    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.

     

    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.

     

    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.

     

    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.

     

    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

     

     

    I would also ask if you partitioned and formatted your new drive before installing your software?