Skip navigation

Aperture 3.4.4 Library Problem

2656 Views 32 Replies Latest reply: Jun 13, 2013 11:16 PM by léonie RSS
1 2 3 Previous Next
omancini Calculating status...
Currently Being Moderated
Apr 28, 2013 7:44 PM

After Aperture was updated to 3.4.4 I could not start the program again, when I initiate the program it tries to open the Aperture Library but it may stay in that condition even for hours without any result, at the end I close the application (the Aperture Bar is there, and you can also access the preferences) and it closes normally although it never finish opening, it permanently shows the next message:

 

Screen Shot 2013-04-28 at 10.14.12 PM.png

 

These are the steps I tried before deciding start this discussion:

 

1. Used the Aperture Library I have in a backup hard drive that is cloning my primary HD regularly but no improvement.

2. Sent the Aperture app to the trash can and installed version 3 from scratch, after that installation I had to update to 3.4.4 because Aperture identified that the library was from a new version. After the new update the program succeded to open. When I closed and tried to open again I got nothing again.

3. In order to verify that the library is not corrupted I used the "Show Package Content" and can browse the information inside the library without any problem.

4. Changed the name of my Aperture Library and started Aperture but  although I see that a new Library file is created but the original problem remains, Aperture never opens.

 

The original Aperture Library is a 70.24 GB file that contains adjustments for all the thousands of photos I used to manage with this application, not been able to open the program is causing a lot of frustration, specially because I keep taking pictures and saving them in the Hard Drive but I am not able to produce them or export them anymore.

 

I am not sure if somebody else experienced this problem but if not is important that Apples know that this is a very annoying problem that must be fixed ASAP.

 

Thanks

Mac Pro, Mac OS X (10.7.5), 2 x 28 GHz Quad-Core Intel Xeon
  • Tony Gay Level 4 Level 4 (1,625 points)
    Currently Being Moderated
    Apr 28, 2013 10:06 PM (in response to omancini)

    First port of call is this page;

     

    http://support.apple.com/kb/HT3805

     

    run through the steps listed here and let us know how you go.

     

    Tony

  • léonie Level 8 Level 8 (46,560 points)
    Currently Being Moderated
    Apr 29, 2013 2:03 AM (in response to omancini)

    What is the errormessage exactly? Your screenshot does not show for me:

     

    Screen Shot 2013-04-29 at 11.01.44.png

  • léonie Level 8 Level 8 (46,560 points)
    Currently Being Moderated
    Apr 29, 2013 5:20 AM (in response to omancini)

    What else have you tried from the Trouble Shooting Basics:

    http://support.apple.com/kb/HT3805  ?

     

    It would help to know, if the problem is system wide or caused by something in your User account. Try to launch Aperture from a different User account, see:

    Isolating an issue by using another user account

     

     

    If it is only happening in your User Account, check, if it is caused by your Aperture Library: Can Aperture launch properly, if you start it on a new, empty library and import a few test images?

     

    If yes, check, if you have not imported corrupted media; launch Aperture on your main Aperture library with the "Shift" key held down.  Does it work? Then you have imported a corrupted or incompatible video or image file and need to find and remove it.

     

    But if the Shift key does not help, the library database files may need repairing.

    after the Library Consistency Check was completed, Aperture did not do any thing different.

    What exactly did you do? Repair permissions, repair database? Rebuild database? Try all three, if you have not done so already.  But be sure you have a backup, before you try rebuild.

     


  • Kirby Krieger Level 6 Level 6 (11,570 points)
    Currently Being Moderated
    Apr 29, 2013 6:32 AM (in response to omancini)

    omancini wrote:

     

    The problem is that Aperture never opens no matter how many hours I leave the "Openinig Aperture Library" process run. Thanks

    Exactly how many hours?  How big is your Library (GB)?  How many Images?  Do you know how many files are in it (back-up programs usually list this)?

     

    I run a test Library with about 750,000 Images and over 7 million files in it.  It can take over 40 hr. on a 2.6 GHz quad-core machine to finish some global operations.

     

    (Added:)

    I _strongly_ advise users to _never_ force-quit Aperture, and, if your do force-quit Aperture, to immediately run "Repair Database".

     

    Message was edited by: Kirby Krieger

  • léonie Level 8 Level 8 (46,560 points)
    Currently Being Moderated
    Apr 29, 2013 6:50 AM (in response to Kirby Krieger)

    (Added:)

    I _strongly_ advise users to _never_ force-quit Aperture, and, if your do force-quit Aperture, to immediately run "Repair Database".

     

    And I'd like to add to this sage advice - try first to quit using the Terminal:

     

                     If Aperture is unresponsive, how to avoid force quitting?

  • léonie Level 8 Level 8 (46,560 points)
    Currently Being Moderated
    Apr 29, 2013 7:15 AM (in response to omancini)

    I do not see why the user account should be an issue with the problem since the application worked OK before the upgrade,

    After an upgrade the user account settings can be a big problem, unfortunately. If you have applications, plug-ins, preference panes, device drivers installed, kernel extensions installed, that are incompatible with your operating system, then an upgrade of a single application can expose this problem. Also, corrupted preferences files and presets may now be giving problems all of a sudden, even if the older version of Aperture did not use these files.

     

    Launching Aperture from a different user account will show you, if there is a system wide problem (Aperture, MacOS X, hardware) or something that needs fixing in your account.

     

    Should Aperture launch without problems from another account, remove the preferences and - if necessary - the presets, as described in the Aperture 3: Troubleshooting Basics

     

    Also disable plug-ins, start-up items, check the non-standard preference panes you may have installed.

     

    If it does not work from a different account, you need to check carefully all installed Applications and plug-ins, if they are compatible with your current system version.

     

    step 4 explains that I renamed the Library, opened Aperture 3.4.4
    and although a new Library was created the application never starts with that Library either

    sorry, I missed that step.

  • Kirby Krieger Level 6 Level 6 (11,570 points)
    Currently Being Moderated
    Apr 29, 2013 7:52 AM (in response to omancini)

    I should have read the full thread before adding to it.  Sorry  .

     

    Léonie and others are much better at installation issues (which I think this is) than I am.  The way to check that you have an installation issue is to see if you can open a new Library under another user account.  It is not clear to me what you did in your step #4:

    4. Changed the name of my Aperture Library and started Aperture but  although I see that a new Library file is created but the original problem remains, Aperture never opens.

    Leaving your old (renamed) Library aside, can you from both another user account and from your admin user account, launch Aperture and create a new, functioning Library?

1 2 3 Previous Next

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.