Skip navigation

aperture updates

910 Views 17 Replies Latest reply: May 11, 2013 8:16 PM by DocOrly RSS
1 2 Previous Next
DocOrly Level 1 Level 1 (0 points)
Currently Being Moderated
May 4, 2013 6:02 PM

I just installed Aperture 3 (from a CD) which has not updates at all.

Now when i go to update i see updates from 3 to 4 which update do i do, all of them one by one or just the latest one?

Thank you,

iMac, OS X Mountain Lion (10.8.3)
  • Frank Caggiano Level 7 Level 7 (22,900 points)
    Currently Being Moderated
    May 4, 2013 6:18 PM (in response to DocOrly)

    Where are you seeing the updates? If you run Software Update it should just install the changes that you need for your system.

     

    In any case the updates are non cumulative, you only need to install the latest one.

  • Frank Caggiano Level 7 Level 7 (22,900 points)
    Currently Being Moderated
    May 4, 2013 6:39 PM (in response to DocOrly)

    No by non-cumulative I mean one does not depend on an earlier one.

     

     

    In any case the updates are non cumulative, you only need to install the latest one.

    But what you should do is go to the Apple menu in the upper left hand corner of the screen and run Software Update… that will ensure you get all the latest updates for your system

     

    Message was edited by: Frank Caggiano

  • Frank Caggiano Level 7 Level 7 (22,900 points)
    Currently Being Moderated
    May 4, 2013 6:40 PM (in response to DocOrly)

    You're quicker then me

     

    Ok good but see my post the best thing to do is run software update.

  • Frank Caggiano Level 7 Level 7 (22,900 points)
    Currently Being Moderated
    May 4, 2013 6:48 PM (in response to DocOrly)

    First realize that Aperture is a fairly advanced application so it will take some time to get the hang of it and learn it's strengths and weaknesses.

     

    I only just installed it and i already don't really like the organization method it has i wanted my edits to be in the same forlder as the original folder. (i am working with areferenced method).

     

    I'm not sure Im understanding this sentence. The edits (actually the versions created from your edits) don't exist as files until you export a version. Until they they are really just entries in Aperture's database, so you won;t see them in the folder where the referenced originals are if I am understanding your comment.

     

    Look through the user tips here there are a number of tips to help you get a feel for the library. Also have a look at the user manual especially the sections on library organization.

     

    regards

  • Kirby Krieger Level 6 Level 6 (11,590 points)
    Currently Being Moderated
    May 4, 2013 8:04 PM (in response to DocOrly)

    Aperture is a database for managing a photographer's workflow.  It is not a file manager (it does that as well) -- it is an image-manager.  This is a rather high hurdle to set before beginners well-versed with file management.

     

    Read the first seven chapters of the unusually well-done User Manual to get a sense of how the program works.  Also take a look at my consise guide to the parts of Aperture and how they inter-relate (it is on the Aperture Discussions User Tips page).

     

    Many of us went through similar frustrations when we started with Aperture.  It _is_ different, and that difference requires adjustment on your part.  Imho, it is vastly superior to using file managers to manage a photographer's workflow, but my telling you doesn't mean much.  Try it, and try to work with it _the way it is designed to work_.  I think you'll be glad, will use it with pleasure, and will never look back.  But you are going to have to spend several hours learning how it works.

     

    All that said, what you describe as how you want it to work, is, in fact, how it works.  I can't tell what is not working for you, unless you are looking outside the database at files and not using the Aperture interface to look at Images.

     

    HTH.

     

    --Kirby.

    (Sent from my magic glass.)

  • léonie Level 8 Level 8 (46,750 points)
    Currently Being Moderated
    May 4, 2013 11:22 PM (in response to DocOrly)

    At least now i understand what Frank was saying about exporting the photo to where i want it (it's a fancy way of saying copy and past, or save as...)

    Not quite - "Export" is very different from "Save as":

    In the newer Macos X versions there is a fine distinction between "Save" and "Export".

    • You "Save" or "Save as" documents and data to be used by the same application that has created them. "Save" will usually create a file in the same format as the one you are currently working on.
    • You "Export", if you want to create new documents to be used by other applications, usually in a different format for special purposes, and the application will not necessarily use and manage the document any longer.
    • You "Share", if you want to create a document to be used by other clients (Photo stream, Mail, Flickr, Faacebook,...) and changes need to be synced in some way. That is only possible for application specific built-in ways to share..

    Since Aperture is at the heart a database that is managing its own documents internally, edited images do not necessarily exist as image files and there simply is no "Save" command. All edits are applied immediately and automatically, like for any other database. Exporting is a way to force Aperture  to render an image file that can be accessed outside Aperture and used by other applications. But this will be really an export from Aperture, not a "Save". Aperture will give up any connection to exported image files and will not keep track of it. You can freely move and edit them. Any changes you do to that exported image will not be reflected in Aperture.

     

    If you want to edit Aperture images in other programs, like Photoshop, you can tell Aperture to set up an external editor. Then Aperture will send an image file to the external program, and after editing you save the image in the external program. This way Aperture will see the changes.

     

    Regards

    Léonie

  • chromatin64 Level 1 Level 1 (10 points)
    Currently Being Moderated
    May 5, 2013 10:17 AM (in response to DocOrly)

    It can be your photo manager and photo editor though, DocOrly. You just have to think about it a bit differently, especially when it comes to parametric image editing (PIE) where Aperture stores instructions on how to edit your image rather than editing the image itself.

     

    Using Aperture means you keep your original files untouched and produce edited final master versions (using PIE) and from those, derivative versions (also using PIE). And then you can revisit any original or version at any time and re-edit, all the while preserving your original out-of-camera image untouched. And you can then export your derivative images according to your needs.

     

    And if you absolutely want (although there is no definite need), you can export those derivative images to whichever folder you like and then re-import your these into a separate project within Aperture. That way, you can keep track of your "saved" edits and they'll be portable en masse.

1 2 Previous Next

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.