Currently Being ModeratedFeb 12, 2013 4:59 AM (in response to mynameisearl)
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock or under Apple menu / System pref. - not the Device)
Yours Bengt W
Currently Being ModeratedFeb 12, 2013 1:51 PM (in response to Bengt Wärleby)
Thanks for the suggestion, unfortunatly I am still having the same error.
iDefrag seem to run through ok overnight and I assume made any disk space I had contigous which is something I have read on on web that was thought to be a cause. Not in my case it appears.
Also tried your suggestion of turning off TimeMachine, again unfortunatly this did not improve the situation and I am still getting the -108 error. I can only assume I have hit some sort of Project Limit either related to my project itself or the system. I think the only course of action I have now is to split my project into two pieces but just a shame really.
Any other suggestions most welcome!
Currently Being ModeratedFeb 12, 2013 11:07 PM (in response to mynameisearl)
Project lenght - I doubt
Material used that iMovie can not use as Video Codec, photo file format and audio file format
• Video Codec - I use interlaced SD .dv or AIC - lot's of .mov, .mp4 etc are NO Codec but containers and file need to be opened by QuickTime player and then Inspector [cmd+I] to find out what Codec video really is
• Photo - I only use .jpg - NEVER .bmp or other - all converted to .jpg (GraphicConverter™)
• Audio - NEVER .mp3 or other strange format - ONLY .aiff 16-bit 48kHz or from Audio CD .aiff 44.1kHz
By splitting project into halfs - one can rather rappidly find the faulthing part. One cont. to split till all parts works OK
Free space on Start-Up Hard Disk
• > 25GB if only interlaced SD material is used (standard for DVD - PAL or NTSC)
• if HD material then 4 - 5 times more is a safe level.
Yours Bengt W
Currently Being ModeratedFeb 14, 2013 2:32 PM (in response to Bengt Wärleby)
Well after going back through my time machine 6 months and trying old versions of the project which did work - and now no longer do not I can only assume this is disk space related or I have some sort of corruption of iMovie. Next step will be to transfer all my video to an external drive so as to create space on my MacBook - currently I have 50Gb so really surprised if this will resolve the issue. If anyone has any ideas of how to create a clean install of iMovie I would be very gratefull !!
Currently Being ModeratedFeb 15, 2013 9:31 AM (in response to mynameisearl)
Ok latest update:
I moved all my video files to an external drive. This left 500GB free on my boot disc where iMovie is installed.
The project still fails to share into iTunes as HD - I get the dreaded -108 error.
If I share into iTunes as a Large file - it works fine.
For info file contains only music I legaly own through iTunes, only photo's I legaly own through iPhoto and Movies that are home videos captured on either my Sony Handycam or Sony NEX5 camera. There is nothing special going on here which is all the more frustrating.
Also - I have gone back 6 months on my time capsule and taken the same file at 6 different points in time which worked then with no issues and now even simply restoring those files and resharing in HD causes the -108 error on this project.
Other projects much smaller in length 3 - 10 mins share fine in HD.
Really at a loss so any help/advice would be welcomed.
Currently Being ModeratedFeb 16, 2013 5:20 AM (in response to mynameisearl)
OK - so made some progress - I think.
The smaller project I made which was 35 mins long that failed with the error -49, I split in half to circa 15mins and this worked!
So - I duplictaed the orginal again and created another version 35 mins long - this failed error -49
I then turned OFF Time machine - Rebooted - then before loading iMovie I ran the "sudo tmutil disablelocal" command from terminal.
I then started iMovie, ran the HD iTunes Share on the 35 min movie and this WORKED.
I will now trying and export the full orginal movie again 1hr 14mins worth using iTunes SHARE HD.
Currently Being ModeratedFeb 16, 2013 8:08 AM (in response to mynameisearl)
FAIL! Wow - this is really frustrating me!
So back to square one with the orginal large movie but at least now I can only assume there is some sort of issue with the original project in the second half. I think the issue with time machine local backups is just another contributing factor to this.
Will start with the original file again and start by removing 20 mins of the project which should roughly get me between the 35 min length that seems to work and the 1hr 14mins that does not. Hoping I can narrow this down to some sort of issue with a particular part of the project - not holding my hopes up as said right at the start - it works fine rendering to a large video. Just not HD!
Currently Being ModeratedFeb 17, 2013 2:17 AM (in response to mynameisearl)
Ok - after much cutting, trial and error and days of work I have never really established a root cause for the -108 error. Nothing I did resolved the issue to the orginal project.
The only work around I have found is to split the Original Project into two.
What I found was that anything around the 60 mins mark and above just failed to render in HD and showed the -108 error.
What worked for me was creating two project files - one around 57mins long - the other a part 2 - around 17 mins long. All using exactly the same source clips, photo's, music and transitions as the orginal.
This now works. I guess having it split in two makes it a little easier to work with as I wont have to keep rendering the first part which does not change but really wish Apple would throw some light on this.
Anyway - I hope all of the above at least proves useful for others.
Currently Being ModeratedFeb 17, 2013 2:57 AM (in response to mynameisearl)
Thank You for Your feed back
If OK - I add this to my Error -108 suggestion text.
And Thank You again for Your feedback as it leads us one step forward in solving this big problem
Yours Bengt W
Currently Being ModeratedFeb 17, 2013 12:51 PM (in response to Bengt Wärleby)
Final - Final update:-
I think I was being a bit ambitious when I spoken about 57 minutes earlier - The maximum I can get to render in HD without getting the dreaded -108 is around 40 mins - Im keeping my large project in to <40 minute parts.
Seems to be working.