Skip navigation

macbook pro 2011 thunderbolt to  mid 2010 iMac mini display port?

1779 Views 7 Replies Latest reply: May 29, 2013 9:07 AM by maxintosh pro RSS
markfromelizabeth bay Calculating status...
Currently Being Moderated
Jul 5, 2012 7:05 AM

Hi,

 

I have been searching for an answer to this question, I have a macbook pro model 2011 with a thunderbolt connection and I also own a mid 2010 imac with a mini display port, is there a cable which would run from the thunderbolt connector to my minidisplay port on the imac, allowing me to use the imac as a second display for my macbook pro?

Final Cut Pro X, Mac OS X (10.6.7)
  • dsimagry Level 4 Level 4 (1,275 points)

    iMac (Mid 2011): Target Display Mode does not work with Mini DisplayPort cable

    http://support.apple.com/kb/TS3775

  • apple-kara Calculating status...

    dsimagry, Mark wasn't asking about a Mid 2011 iMac, he was asking about a mid 2010 iMac with a 2011 MBP. That link is not applicable.

     

    Mark, I have a similar setup (same iMac, 2012 MBP with thunderbolt) and have been working on it for a while. While the Thunderbolt ports are supposedly backwards compatible with the Mini DisplayPort interface, a bunch of reading (and an experimental purchase (and subsequent return) of a $70 Thunderbolt cable to try it out) indicates that you can't do that with a Thunderbolt cable but that a Mini DisplayPort <--> Mini DisplayPort cable should work.

     

    As I'm in Canada, it's been a right pain to get one of those (less selection on our Amazon than yours) but I finally got one and only just tried it out this morning. It _DOES_ work, but there are some display refresh/jaggies issues on the iMac. I don't know if that's maybe because the MBP is running on battery at the moment & doesn't have enough power to consistently drive the larger display or whether there's something else wrong, but I'll be spending the remainder of my long weekend trying to figure that out. The issue is that any mouse movement on the screen causes bands of what looks like loss of frame sync 'static'.

     

    I'll let you know here if what I eventually figure out. On the up side, this is by FAR the closest I've gotten so far.

  • maxintosh pro Calculating status...

    If you haven't fixed this problem, are still interested or have bought new Macs at great expense, here is the solution for you!

     

    There was a new Thunderbol Target Display Update last night and the MDP Target Display Utilites have been updated to allow this function!

     

    This Apple web page says that it is possible! Go down to point five! Then you will be able to see what you need to buy to do it correctly.

    http://support.apple.com/kb/HT3382

     

    That should be all you need! Good luck!

     

    I now do the exact same as what you are trying to do! It didn't work from my TB until recently and the new update fixes a few bugs it did have!

  • Jan Jaap Kikkert Level 4 Level 4 (2,315 points)

    Hi apple-kara,

     

    A quick search on how to connect a Thunderbolt Mac to a MiniDisplayPort iMac (the latter in Target Display Mode) took me to this discussion. I was wondering about the possibilty to connect my new (i.e. late 2012) iMac to my old (i.e. late 2009) iMac. You mention in your post to post any results. Did you figure it out? If so, could you please enlighten me and others?

     

    TIA

     

    JJ

  • maxintosh pro Level 1 Level 1 (65 points)

    Hi JJ,

     

    As you want to connect your late 2009 iMac (set as target display) to your late 2012 iMac, all you will need is a standard Mini Displayport to Mini Displayport cable. Thunderbolt technology natively supports Mini Displayport as this is the format that the display data is sent. The connectors are identical, so it is just as easy as plugging the cable into the two machines.

     

    Installing cable (trouble shoot #1):

    If you have trouble getting the target display to work, try a boot ordered approach.

    Turn the target display on first, plug in the cable to the target display (not the late 2012 iMac), turn on the late 2012 iMac, wait until OS has finished launching, insert MDP cable into late 2012 iMac and press CMD + F2 on the late 2009 iMac keyboard to set as taget display. You should then navigate to the Display System Preferences window to check out your settings. If all is good, you should be all sorted!

     

    MaX.

  • Jan Jaap Kikkert Level 4 Level 4 (2,315 points)

    Hi MaX,

     

    Thanks for your quick reply. Cable should be here tomorrow...

    I may need to clear the clutter on my desk but 2 27" screens will give me lots of screen real estate ;-)

     

    JJ

  • maxintosh pro Level 1 Level 1 (65 points)

    Hi JJ,

     

    No problem. I hope it all goes well! Having space for the big monitors is a problem we share! It is well worth it though!

     

    MaX.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.