1 64 65 66 67 68 Previous Next 1,014 Replies Latest reply: Mar 16, 2014 4:35 AM by Sedici Go to original post Branched to a new discussion.
  • 975. Re: bluetooth music issues after iOS6 update
    ThomiThumb Level 1 Level 1 (0 points)

    Just to clarify. DO NOT update your North American head unit with the European update. It will not work and will fry your unit.

  • 976. Re: bluetooth music issues after iOS6 update
    webdavide Level 1 Level 1 (5 points)

    Hi everyone, I'm Davide from Italy, i'm sorry for my bad english, but...

     

    finally at the end I did it!!

    my situation is:

    - Alpine 133Bt

    - retina MBP with OSX 10.8.3

     

    after more than two hours of trying, I managed to upgrade my bluetooth to version 01.27.00

    perform the following steps:

     

    - first of all you have to updated firmware of your 133BT, following the instructions at the following link.

    (only for European versions)

    http://www.alpine.co.uk/support/firmware-map-update/cde-131rcde-133bt-firmware-u pdate.html

     

    and, at the end you will have the M-SUM 51C7 version

     

    - Connect the 133BT to the Mac, using the menu of the 133BT to search for the mac device

    (if the mac asks you for a code, example 998756 answer yes! is always good!)

    keep trying if you do not immediately connect. I had to try several times!

     

    - then, before upgrading the firmware, disconnect the Bt133 using the command disconnect from mac (from the bluetooth menu) and turn off the car

    then reconnecting the bt133 always using the command from the mac, i used 'browse device'

    and you are automatically reconnected

    and then VERY IMPORTANT set "uses as an audio device".

     

    - at this point, before putting the files in the folder "update", put the bt133 in "fw update" - "update yes"

    and it will work. all the 1,8 mb will be transferred

    now will apear the message - firmware update don't touch any button

    ...and after a few minutes ...- firmware updated please press any button

     

    I hope you will succeed too.

    if you have any questions, ask me!

    bye

    Davide

  • 977. Re: bluetooth music issues after iOS6 update
    BraamN Level 1 Level 1 (0 points)

    Ok so I'm a bit late to the party but it seems like the issue is still around. I have the Alpine IVE-W530BT and I'm running an Iphone 5. I had the ussual meta data and headunit control of Bluetooth music issue. I updated to Firmware 27 which resolved this by using a windows 7 HP Laptop.

     

    However the persistent problem for me is the terrible sound quality while making calls on the head unit. It imporved marginally with Firmware 27 , I have also updated to firmware .35 which i got from the Local South African Alpine distributor but this still does not resolve the issue.

     

    Before the 530 BT I had an ALPINE CDEW235BT running with a IOS5 Iphone 4s and LOVED it.. a while ago I  Connected a simple Nokia to the unit and sound quality was remarably better..

     

    I'm ready to chuck either the radio or the telephone in the ocean..

  • 978. Re: bluetooth music issues after iOS6 update
    mau_mart Level 1 Level 1 (0 points)

    Hello... I need also help for this problem..!!!!

     

    Thanks in advance.!!

  • 979. Re: bluetooth music issues after iOS6 update
    DK273 Level 1 Level 1 (0 points)

    Gerwin, thanks a lot for sharing this. After two days of struggling to update the FW, your info is what helped me with my CDE-HD137BT.

     

    the "using the audio device" step that he outlines was the missing link that finally allowed the FW on my stereo to be updated, and I can't tell you how happy I am to finally being able to use those play/skip track buttons again!

  • 980. Re: bluetooth music issues after iOS6 update
    Clark Addison Level 1 Level 1 (15 points)

    After several attempts using my Macbook, and continually being stalled about halfway through by the 0000 display, I called Alpine.  The service rep told me that units displaying that are not upgradeable.  He said to send it to the service center, and they would either replace the bluetooth chip or replace the entire unit.

     

    So if you get the dreaded 0000 display, call Alpine.

  • 981. Re: bluetooth music issues after iOS6 update
    Clark Addison Level 1 Level 1 (15 points)

    Thanks.  I called Alpine, and they told me the same thing.  The 133BT is on its way back to them.

  • 982. Re: bluetooth music issues after iOS6 update
    jmatteis Level 1 Level 1 (0 points)

    I'm getting this now, my netbook finds the unit, but it tries to install drivers and fails, and therefore cannot pair, I am using a netbook with usb dongle, not built in bluetooth, wondering if that makes a difference??? 

  • 983. Re: bluetooth music issues after iOS6 update
    Clark Addison Level 1 Level 1 (15 points)

    After calling Alpine about the 0000 problem and getting an updated unit for free, it works better than new.  With the iphone in my pocket, even if the itunes app hasn't been activated, it starts playing.  It displays albums, songs, and artists as before, and controls the phone from the head unit as before.  Previously, I had to start itunes on the phone for it to start playing.

     

    It took a while, but Alpine finally came through.

  • 984. Re: bluetooth music issues after iOS6 update
    Stephen Barrante Level 1 Level 1 (105 points)

    That's great that Alpine is supporting the consumer on this.

     

    Has anyone received any word from Kenwood? My BT852HD is still a mess. All I can do is get music to play through it via bluetooth. I have no skip controls and little or no track information displaying.

     

    Amazingly I can still make calls... fwiw.

  • 985. Re: bluetooth music issues after iOS6 update
    Ramjet7 Level 1 Level 1 (95 points)

    Problem is still around.

     

    Until a few weeks ago I was successfully playing music to my Toyoya car audio with my iPhone 4 using iOS 5.1.1. and bluetooth. I bought an iPod 4g specifically to play in my car with bluetooth. The iPod is on iOS 6.1.3 and it skips music all the time when playing via bluetooth.

     

    I've tried most of the usual resets, re-pair, etc, but I either have to use the 3.5mm cable so I can play it or go back to my iPhone to play bluetooth.

     

    Not happy at all.

  • 986. Re: bluetooth music issues after iOS6 update
    jdw1407 Level 1 Level 1 (0 points)

    Hey Stephen,

     

    Got a email from kenwood day saying there is an update, I updated the head unit, (same as you) and I now/again have bluetooth audio control. Head to the kenwood site and go get it for yourself

  • 987. Re: bluetooth music issues after iOS6 update
    bigmike631 Level 1 Level 1 (0 points)

    Couldnt find it on their site. Last update was back in 2012. Where are you looking?

  • 988. Re: bluetooth music issues after iOS6 update
    Stephen Barrante Level 1 Level 1 (105 points)

    Thanks guys, I just posted a link to the compatibility report, and then removed it. I want to confirm this is infact the update for my unit for I send you to the wrong place.

  • 989. Re: bluetooth music issues after iOS6 update
    bigmike631 Level 1 Level 1 (0 points)

    I dont see the bt852hd in the list?