Skip navigation

Beats Wireless

30559 Views 12 Replies Latest reply: Feb 13, 2014 5:06 PM by proflashrtist RSS
Timooooon Level 1 Level 1 (0 points)
Currently Being Moderated
Apr 16, 2012 8:50 AM

Hello Guys,

 

Can anyone please assist me with establisihing bluetooth connection between my Beats Wireless and my Macbook?

The headset does easily connect with my iphone; however, when i try to use it with my mac it pair and configures successfully but does not connect.

Please help.

MacBook Pro, Mac OS X (10.7.2)
  • mjtriggs Level 1 Level 1 (0 points)
    Currently Being Moderated
    Jun 13, 2012 8:04 AM (in response to Timooooon)

    I'm having the exact opposite problem. Mine connect to my MacBook Pro but not my iPhone. When they've connected to each other, click on the little gear button on the bluetooth menu, and select "Use This As My Audio Device". This worked for me.

     

    How have you gone about yours?

  • sriramfromhyderabad Level 1 Level 1 (0 points)
    Currently Being Moderated
    Aug 17, 2012 12:36 AM (in response to Timooooon)

    even i have faced the same problem,fallow few steps

     

    1) Turn off beats wireless headset

    2) Go to the bluetooth menu choose setup bluetooth device

    3) turn on beats wirless headset and keep holding the power button

    4) the headset will be dicovered in the bluetooth setup assistant menu then select the device and click continue

    5) Go to bluetooth menu and you will see the beats wireless go to that and selct the option as use as audio device

     

    hope this will help you guys

  • j85021 Level 1 Level 1 (0 points)
    Currently Being Moderated
    Jan 16, 2013 2:04 AM (in response to Timooooon)

    i had been having issues switching the pairing for my beats wireless between my macbook and iphone.  but i think i finally cracked it.

     

    first, get the headphones paired with each device.  on macbook, this is done in the bluetooth dropdown menu. select "set up bluetooth device" and choose the headphones while the headphones are in pairing mode (pairing mode = flashing red and blue light, achieved by holding the power button for extra seconds).  on the iphone, this is done in settings > bluetooth > and select the beats wireless, while headphones are in pairing mode.  if you're having trouble getting the headphones to pair with either the computer or the iphone, make sure both the phone and computer have bluetooth turned on and are discoverable.  also make sure you start with the headphones off, and then hold down the power button for extra seconds (not just until the light turns blue, but until it makes an additional noise and flashes between red and blue.  for me, i think the problem was that i was turning them on, and THEN turning them into pairing mode. it works best if you go straight from "off" into "pairing mode" without releasing the button in between.

     

    now, to switch between devices:

    First, turn off the headphones.  then turn headphones on, but go straight to pairing mode.  (so, do NOT press for a few seconds to turn it on, then press for several seconds to go into pairing mode.  instead, DO press "power" for several seconds to go straight from "off" to "pairing mode.")

    Now, to connect to macbook: while headphones are in pairing mode, select them from the bluetooth dropdown menu.  select "use as audio device."  should work perfectly.

    Now, if you want to switch to your iphone: power off the headphones. then turn the headphones on, but go straight into pairing mode (hold for several seconds until the light flashes blue/red, NOT for a few seconds until it goes blue). while in pairing mode, go on the phone into settings > bluetooth > and select the Beats Wireless. that should do it.  if it still doesn't work, then make sure "beats wireless" is selected from the airtunes menu in the music app (the little box with the arrow in the bottom right corner). but that should be selected automatically after pairing.

     

    hope this helps!  i found the trick was going straight into pairing mode from a powered-off position. if i just turned on the headphones, they would immediately try pairing with the device they had last been used with.  then the headphones would get confused and just shut down.  but when i follow the steps outlines above, it switches back and forth easily every time.  i wish there was a way to do it without going into the iphone's settings every time (like you can with airtunes) but such is life.

     

    note: if your computer doesn't have a bluetooth drop down menu in the upper right set of menus, then you can add it through System Preferences > Bluetooth > Show Bluetooth Status in the Menu Bar

  • bwomsm1 Level 1 Level 1 (0 points)
    Currently Being Moderated
    Jan 20, 2013 1:11 PM (in response to sriramfromhyderabad)

    Worked for me.

     

    Thank you.

     

    Boaz

    Israel

  • Mynica1023 Level 1 Level 1 (0 points)
    Currently Being Moderated
    Jun 1, 2013 4:10 PM (in response to sriramfromhyderabad)

    Thank you for those steps. They worked perfectly!

  • rmm19 Level 1 Level 1 (0 points)
    Currently Being Moderated
    Jun 13, 2013 10:19 AM (in response to sriramfromhyderabad)

    thanks this helped!

  • Narinder Kapoor Level 1 Level 1 (0 points)
    Currently Being Moderated
    Jun 14, 2013 3:57 AM (in response to j85021)

    But when I try shuting my beats off the wont shut they will just keep blinking red. And then to switch them off I hav to plug my beats cable into it. And then when I start it I go to pairing mode and it pairs sucsessfully but then it stops connecting and starts to blink red again.....

     

    Please help, I really need help!

     

    Thanks

  • Narinder Kapoor Level 1 Level 1 (0 points)
    Currently Being Moderated
    Jun 14, 2013 3:58 AM (in response to sriramfromhyderabad)

    But when I try shuting my beats off the wont shut they will just keep blinking red. And then to switch them off I hav to plug my beats cable into it. And then when I start it I go to pairing mode and it pairs sucsessfully but then it stops connecting and starts to blink red again.....

     

    Please help, I really need help!

     

    Thanks

  • j85021 Level 1 Level 1 (0 points)
    Currently Being Moderated
    Jul 24, 2013 11:49 PM (in response to Narinder Kapoor)

    Have you tried a hard reset?

     

    Turn them off and connect them to a charger.  Then press and hold the multifunction and volume up keys at the same time.  After 10 or so seconds, the headset should reset to factory settings.

     

    Hope that helps!

  • j85021 Level 1 Level 1 (0 points)
    Currently Being Moderated
    Jul 24, 2013 11:58 PM (in response to Narinder Kapoor)

    According to the user guide, a blinking red light is supposed to mean that the unit is on and searching for the last device it was paired with.  I don't know what would cause them to keep doing that after you've tried to turn them off though.

     

    When you pair them successfully, will they play music?  Does it cut out randomly after that, or does the problem develop when you try to shut them off yourself?  And have you tried pairing them with any other devices?

     

    You can reset the pairing settings by holding down both the multifunction and volume down keys (no need to plug them in for this).

     

    User Guide: http://demandware.edgesuite.net/aajh_prd/on/demandware.static/Sites-beats-Site/S ites-beats-master-catalog-en/default/v1374729636195/pdf/beats-wireless-user-guid e-americas.pdf

  • LoginaElHakim Level 1 Level 1 (0 points)
    Currently Being Moderated
    Sep 17, 2013 5:34 PM (in response to sriramfromhyderabad)

    YOU HAVE NO IDEA WHAT YOU HAVE JUST DONE TO ME !!!!
    YAAAAAAHAAAAAAAAAAYYYYY

    I AM SIMPLY THE HAPPIEST PERSON ON EARTH HAHAHAHAH

    thank you that was really usefull and to the point

     

  • proflashrtist Level 1 Level 1 (0 points)
    Currently Being Moderated
    Feb 13, 2014 5:06 PM (in response to Timooooon)

    Can someone help me?  I just got the dre beats wireless and for some reason when i open a youtube video the beats DON'T stream the youtube video.  Works perfect witth my galaxy s4 (i know talking android on an apple site so sue me) but when i switch to youtube... they shut off.  Anyone else have that issue?

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.