1 2 3 Previous Next 31 Replies Latest reply: Mar 30, 2014 12:33 AM by Barry
hotwheels 22 Level 1 Level 1 (0 points)

i am reading documentation here and feeling like a total dolt.

 

can someone please remind me how i get my spreadsheet to print to my second printer and to get it to print in tray 1 with the 11 x 17 paper and how i get the spreadsheet to scale to fit this page size?

 

i can't figure out if i am supposed to select the paper size first in the PRINT dialog but if i do this i can't figure out how to scale it and if i scale it i can't figure out how to get it off of 8 x 11 paper.

 

oh the conundrums in mac print dialogs ; )

 

tia


Mac Pro, Mac OS X (10.7.4), 64 bit Win7 in Parallels | iCloud
  • 1. Re: how to select page size and fit to page size?
    Wayne Contello Level 6 Level 6 (13,620 points)

    set the paper size then enable print view by selecting the menu item "View > Show Print View".  Then in the sheet view use the slider to adjust the scaling until you fill the page:

     

    Screen Shot 2013-06-17 at 3.45.21 PM.png

  • 2. Re: how to select page size and fit to page size?
    hotwheels 22 Level 1 Level 1 (0 points)

    hi wayne. i think i got hung up on the Set Paper View part. where do i do this?

     

    i have been searching help for various terms and i cannot find this.

     

    i mean, you want me to set the paper size /first/ i gather? then i scale the file to fit this paper size presumably?

     

    THEN i select Print and i select the PRINTER and then i select the PAPER TRAY where the paper is i am guessing?

  • 3. Re: how to select page size and fit to page size?
    Wayne Contello Level 6 Level 6 (13,620 points)

    To set the paper size use the Document Inspector:

     

    Screen Shot 2013-06-17 at 3.48.55 PM.png

  • 4. Re: how to select page size and fit to page size?
    Wayne Contello Level 6 Level 6 (13,620 points)

    Overall the printer stuff is specific to the particular printer you have-- hence the generic answer

  • 5. Re: how to select page size and fit to page size?
    hotwheels 22 Level 1 Level 1 (0 points)

    ok. crimeny. no wonder i couldn't find the thing. good lord THANK YOU!

     

    it's like duck-duck-goose trying to find printer settings on the mac. i feel like i am in some spacetime wormhole described by stephen hawking or some sci-fi movie where the guy goes back in time and he becomes his father's father or something. first select the printer, then set the paper size then scale the document then find the printer then select the paper...

     

    couldn't they simpify this and at a /minimum/ put the ability to set PAPER SIZE in a pulldown item? i have to jump though about ten dialogs and ten pulldowns just to get a document to print on something other than 8 x 11.

     

    can i please ask you - - do i SAVE this setting to the Printer Settings so i can print to 11 X 17 from Numbers quicker next time or do i have to do this jig all over again next time i have another document to print at 11 x 17?

     

    THANKS

  • 6. Re: how to select page size and fit to page size?
    Wayne Contello Level 6 Level 6 (13,620 points)

    hotwheels,

     

    The inspector is consisten across iWork.  It is well organized you are just going through a learning curve.  The forums are a great resource.  You can also download the, free, searchable users guide from here:

     

    http://support.apple.com/manuals/#productivitysoftware

     

    I have never connected to a printer with more than one tray so I cannot help much.  I guess it would be in the dialog when you actually print.

  • 7. Re: how to select page size and fit to page size?
    hotwheels 22 Level 1 Level 1 (0 points)

    wayne. THANKS. do you know if i get to /save/ this so i don't have to go through so many setup routines next time?

     

    no offense but learning curve is no joke. i am reading up on CUPS right now just so i can keep the printer dialog from defaulting to automatically rotate (makes it much bigger each time, wastes ink and i don't want it to automatically change anything as a default) and to keep it from automatically scaling my images to fit (again no thank you on the automatic resizing).

     

    i mean, i have been trying to fix this for two years and i am figuring out i have to get on some kind of online interface to do this?

     

    do you know anything about CUPS? seems uber complicated...

  • 8. Re: how to select page size and fit to page size?
    Wayne Contello Level 6 Level 6 (13,620 points)

    hotwheels,

     

    The sheet orientation is set on a "by-sheet" basis in the "Sheet" inspector section just below the arrow of my FIRST post

  • 9. Re: how to select page size and fit to page size?
    Wayne Contello Level 6 Level 6 (13,620 points)

    I do not think you need to learn CUPS (Common Unix Printing System) to print

  • 10. Re: how to select page size and fit to page size?
    hotwheels 22 Level 1 Level 1 (0 points)

    wayne. i am not asking about "sheet orientation" by which i think you mean PAGE LAYOUT? i am asking if i have to go through these steps in inspector every time i want to print to 11 x 17. i am asking if there is a way to SAVE A PRESET to print to 11 x 17. i have to print to 11 x 14 and 11 x 17 and 12 x 18 in various cases and i want to set up a PRESET for all my Numbers documents so i don't have to do three of these for every one of my documents.

     

    is this possible? i mean, is there a way to set presets so i don't have to do twenty steps every time i decide to print to 11 x 17 or 12 x 18 or 8 x14?

     

    anyone know?

  • 11. Re: how to select page size and fit to page size?
    hotwheels 22 Level 1 Level 1 (0 points)

    hi wayne.

     

    in Mac OS my understanding is that in order to set the DEFAULT settings for MAC PRINTER UI you have to get into the CUPS system. there is no other way. if you know of a way to get the mac printer UI to default to 100% size (instead or scaling to fit) or not rotating (instead of automatically rotating) i would love to hear it.

     

    maybe you are saying you don't need to get into CUPS to set defaults when working in the print UI for iWork software?

  • 12. Re: how to select page size and fit to page size?
    Wayne Contello Level 6 Level 6 (13,620 points)

    Hotwheels,

     

    Page setup is usually handled in the document.  To keep from having to repeat the steps to set up for 11x17 duplicate a doc you already have setup and save it as a template after removing data and specific information that does not belong in a template.

     

    In Numbers you can save to a template using the menu item "File > Save as Template"

  • 13. Re: how to select page size and fit to page size?
    hotwheels 22 Level 1 Level 1 (0 points)

    doesn't this /require/ me to /open/ the template then create a document?

  • 14. Re: how to select page size and fit to page size?
    hotwheels 22 Level 1 Level 1 (0 points)

    hi wayne.

     

    i think you have a level of expertise with this software that let's you answer a question in a way that i don't understand. either that or perhaps as a new user my questions are not clear to you.

     

    can you tell me if it is possible to create a SETTING that will let me open a document that is SENT TO ME so that i don't have to run through all these steps just to do what i am asking to do in the title of this post? i mean, i am going to print this explanation out so i can refer to it in the future but i don't want to have to go through all these steps every time someone sends me a document.

     

    i also don't want to have to ask them to format the document as a pdf at 11 x 17 and 12 x 18 every time they send me something.

     

    does that question make sense?

     

    AFAIK your answer is indicating that i can set up a TEMPLATE that will let me /create/ new documents by using this template and what i am asking is if there is a way to print a document to 11 x 17 or to 12 x 18 with PRESETS as i do in Preview....

     

    can you help?

     

    THANKS!

1 2 3 Previous Next