Skip navigation

Digitally switch between PC and Mac

1026 Views 11 Replies Latest reply: Jul 13, 2013 4:22 PM by VikingOSX RSS
jedimasterkyle88 Level 1 Level 1 (0 points)
Currently Being Moderated
Jul 11, 2013 6:04 PM

So I have a dilemma here. 

 

How do I digitally switch between my PC and an eventual Mac Mini using the SAME monitors?

 

I am planning on getting a Mac Mini this fall but I would like to keep the new hardware buying to a minimum as I dont have the desk space for another monitor.  I currently have 3 (three) 20" monitors running on my Windows 7 PC and they are taking up quite a bit of desk space but I would like to use one of the monitors as a monitor for a Mac Mini.  I'll illustrate below:
required_setup.png

 

Basically, what I would like to do is to be able to run my Windows 7 PC across all 3 monitors AND be able to use one of the monitors when I want to switch over to the Mac Mini.  I hope the illustration helps those who are reading this because its the simplest way I could explain it.

 

I know of KVM switches that allow users to switch between PC and Mac but is there a way to do it with 3 monitors?  I'm not wanting OS X to run across all 3 monitors, just one of them.  But I would also like to be able to keep Windows 7 running on the other 2 monitors (if possible.  If not, thats ok)

iPhone 5, Windows 7
  • Kappy Level 10 Level 10 (221,035 points)
    Currently Being Moderated
    Jul 11, 2013 6:08 PM (in response to jedimasterkyle88)

    Connect one of the monitors separately to the Mini. Separately connect the other two to your PC much like are now doing - just one less monitor.

  • Kappy Level 10 Level 10 (221,035 points)
    Currently Being Moderated
    Jul 11, 2013 6:28 PM (in response to jedimasterkyle88)

    I suppose it would be. Other users have used KVM switches to switch between monitors and keyboards. Perhaps in your case you wire the switch's output port to the monitor, then each of the computer ports to each of the computers.

  • Kappy Level 10 Level 10 (221,035 points)
    Currently Being Moderated
    Jul 11, 2013 9:32 PM (in response to jedimasterkyle88)

    Well, you should be able to use VGA with an adaptor. The Mini will likely have a Mini-DisplayPort, so you would need an adaptor for that to VGA which Apple sells. The Mini may have HDMI, but right now the Apple Store is offline so I can't check specs.

     

    I'm surprised there aren't any digital switches you can use, but then I've never tried to use more than one monitor most of the time.

     

    I don't think it's even possible to split one line between two monitors.

  • John Lockwood Level 5 Level 5 (5,075 points)
    Currently Being Moderated
    Jul 12, 2013 3:46 AM (in response to jedimasterkyle88)

    There are also plenty of DVI compatible KVM units on the market, see the following as one example.

     

    http://www.amazon.com/StarTech-Switch-Cables-Audio-SV211KDVI/dp/B0017JY5EU/ref=s r_1_73?ie=UTF8&qid=1373625895&sr=8-73&keywords=dvi+kvm

     

    Another potential option is that some monitors have more than one input e.g. VGA and DVI or DVI and Displayport. In this case you could tell the monitor to switch inputs, this approach however does not let you share the keyboard and mouse unlike the KVM approach.

  • mooblie Level 4 Level 4 (1,915 points)
    Currently Being Moderated
    Jul 12, 2013 3:50 AM (in response to John Lockwood)

    As John said, surely your middle monitor has more than one input?  Just connect the Windows PC to one, e.g. VGA, and the Mini to another, e.g.DVI,  Use the "Select input" switches on the monitor to switch between them.  Won't cost anything!

  • John Lockwood Level 5 Level 5 (5,075 points)
    Currently Being Moderated
    Jul 12, 2013 7:00 PM (in response to jedimasterkyle88)

    Yes in theory you could use a Mini Displayport to VGA adapter, you can only connect a single VGA monitor to the Mac mini this way.

     

    However many people find that the Mac mini is less reliable using VGA connections than DVI. If you could get the PC to use the VGA and then put the Mac mini on DVI that might be better. Check to see if the monitor has any other connectors besides DVI and VGA, maybe there is another better choice.

  • VikingOSX Level 5 Level 5 (4,700 points)
    Currently Being Moderated
    Jul 13, 2013 4:22 PM (in response to jedimasterkyle88)

    For the middle monitor, Use different input connectors for the PC (VGA) and Mac mini (DVI). The monitor should have a button to switch inputs and with a simple button press, you can switch between two running Windoze and OS X. This is what I do.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.