Currently Being ModeratedJul 31, 2013 7:41 AM (in response to johnfaraway)
First, go to FILE/PROJECT PROPERTIES and make sure the project is set to 4:3.
That should fix it.
If you put your clip in a 16:9 project, you have two choices. You can crop off the top and bottom to make it fill the frame. Or you can letterbox it (black bars) so you see the entire original frame. There is a tool on the middle toolbar called ROTATE, CROP, KEN BURNS. This tool will let you toggle between FIT (letterbox) and CROP (cut off top and bottom) for a specific clip.
But if your clip is 4:3 and your project properties are set to 4:3, then you should not need to change anything.
Currently Being ModeratedJul 31, 2013 7:58 AM (in response to AppleMan1958)
Thank you for getting back on this.
I am importing at 4:3 and the File/Project Properties are set at 4:3. As you suggest it it should there for fit. As previously indicated the Clip in the Event area does fit. It is when I move it to the Edit Area (top left) that it seems to go wrong. Could it be something in Camtesia we have not set correctly?
I recognise you suggestion re Rotate, Crop etc but I feel I need to get to the bottom of the problem as there is something we are obviously doing wrong.