Skip navigation

Import video to Aperture library on Mountain Lion

18923 Views 99 Replies Latest reply: Aug 28, 2013 1:45 PM by jsnauman RSS Branched to a new discussion.
  • andyBall_uk Level 6 Level 6 (17,470 points)
    Currently Being Moderated
    Feb 2, 2013 8:03 AM (in response to léonie)

    >>did check quicklook-playing an (xvid via perian) avi file, which is another reported problem solved by restoring the file - sure enough, it would not display,

  • léonie Level 8 Level 8 (46,405 points)
    (xvid via perian) avi file

     

    I have disabled Perian, because it installs the 3ivx codec, which can be causing Aperture to crash or hang.

    I'll try perian later; I have two avis, that need Perian. But if perian does not work without a cached file installed, it is a bug in Perian - after all, a Cache is a temporary storage, that an application should not rely on to be filled.

  • andyBall_uk Level 6 Level 6 (17,470 points)
    Currently Being Moderated
    Feb 2, 2013 10:58 AM (in response to léonie)

    a 'bug' in more than Perian, if you believe that missing files should never upset an app or codec...

     

    I tested a .mov file, after removing Perian & restarting, it also fails to 'quicklook' with similar errors

    it's from a camera, with mono sound, but has always played w/o any special codecs afaik, and still plays in Quicktime w/o Perian

     

    MPEG-4 video (mp4v)

    PCM-MU-LAW (ulaw)

     

    again, rebuilding the cache & restarting seemingly allows it to quicklook as expected. I'll test with a clean install of 10.8.2 sometime, but it's not Perian related here. So, not all movies, but some  - the few mp4's I checked were fine, as you found.

  • andyBall_uk Level 6 Level 6 (17,470 points)

    sorry, still off-topic regarding Aperture, but

    same .mov video, new install of 10.8.2 after erase, no files/settings migrated except the video

    quicklook worked normally... removed xpc cache, restarted, no quicklook... rebuilt cache, restarted, works again.

  • Clarknet Level 1 Level 1 (5 points)
    Currently Being Moderated
    Mar 4, 2013 2:06 PM (in response to in2om)

    So I just had this bug. Very odd, same as everyone else. Aperture used to import video then stopped. I had installed Free Flip4Mac a couple weeks ago. This is the first time I used Aperture since.

     

    Found this thread. Deleted Flip 4 Mac. Restarted with cmd-r. Reinstalled Mountain Lion.

     

    Fixed! How weird. Thanks everyone!

  • simonfromteddington Calculating status...
    Currently Being Moderated
    May 27, 2013 11:45 PM (in response to in2om)

    Just like to re-iterate...

     

    I hade this problem also, it wasn't due to any recently installed software; it happened after having a hard disk fault and having restored from Time machine back-up.  As previously described all videos looked corrupted and won't play or even import anymore. 

     

    The command line fix (using xpchelper worked perfectly) - nice one Andrew.

    As a software dev I can say that im very confident that the video issue was not directly caused by the initial HD corruption i suffered (my first thought); it was a side effect of the full restore.

    The fact that all my videos that were corrupted across a number of years of writing to different parts of the main disk, this issue just would not be manifesting itself as showing this kind of corruption.

     

    In short, I trust that the command line fix was all that was needed.

    And also that an apple fix is sorely needed for that!

  • jsnauman Calculating status...
    Currently Being Moderated
    Aug 28, 2013 10:41 AM (in response to AJL.)

    Can this file be reposted? I see the link is gone. My Time Machine does not seem to have it either. I am having this problem now with Aperture 3.4.5. Anytime I load a card with video on it the Loading Assets wheel spins on and on. I have to copy the movie files off the card using finder and then delete them from the card for aperture to final load it. I do not like having to store my videos seperately!

     

    Thanks!

    Jacquie

  • jsnauman Level 1 Level 1 (0 points)
    Currently Being Moderated
    Aug 28, 2013 11:35 AM (in response to jsnauman)

    Thank you Nigel. They deleted your reply again but I got it in my email. Appreciate the response!!! Thanks so much!!!

  • nigelradestock Calculating status...
    Currently Being Moderated
    Aug 28, 2013 11:42 AM (in response to jsnauman)

    I don't know why they deleted it the second time as I explained what it was and why I was posting the link!

     

    Anyway glad you managed to get the link and download it.

  • jsnauman Level 1 Level 1 (0 points)

    Didn't work for me afterall. Stuck loading assets for over an hour.

1 ... 3 4 5 6 7 Previous Next

Actions

More Like This

  • Retrieving data ...

Bookmarked By (2)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.