Currently Being ModeratedAug 28, 2013 3:02 PM (in response to wyatt2)
Hi Wyatt. The first thing we have to rule out is easy. What do you mean by "turning red"? If the red is just in blotches, and those blotches are in the highlights, then you have turned on "Highlight Hot and Cold Areas". Toggle this off from the "View" menu (where you will also see the keyboard shortcut).
If that's not it, describe what you are seeing, and post a screenshot if you can.
Also: RAW? and have you recently upgraded to Apple RAW Compatibility 4.08?
Currently Being ModeratedAug 28, 2013 3:19 PM (in response to Kirby Krieger)
Thank you for the quick response Kirby. I looked at the settings for hot and cold highlighting and that was not the issue. And yes the files are in raw and updated to the 4.08... The red is not in blotches. Almost the entire photo turns red other than dark areas which appear blue. Any other ideas as to what it could be?
Currently Being ModeratedAug 28, 2013 3:47 PM (in response to Frank Caggiano)
I'm positive Frank. I've checked and re-checked those settings, but to no avail. All my pictures are still showing up red. Any other ideas on how to fix this problem?
Currently Being ModeratedAug 28, 2013 5:23 PM (in response to wyatt2)
Post a screen shot of the entire Aperture window with one of these images displayed. That might help sort this out.
One other thing to check is to make sure you don;t have Onscreen Proofing turned on (View->Onscreen Proofing). Given your description I doubt it's that but its worth a check.
Currently Being ModeratedAug 28, 2013 5:32 PM (in response to Frank Caggiano)
here is the screen I'm stuck with. My pictures will show up normal for a brief second if I scroll to the next picture but once the picture has loaded it immediately mimmicks the above image for all my photos in aperture. And once I have allowed the image to load once it no longer shows up normal, but only shows up red.
Currently Being ModeratedAug 28, 2013 5:59 PM (in response to wyatt2)
That sure looks like Highlight Hot and Cold areas is on but as it is not (at least intentionally) I'd start by making a new empty library ad importing a few of these images into the new library to see if the problem occurs there.
If it does not, try repairing the affected library (Start Aperture with the command and option kesys held down, select repair library).
If the problem happens in the new library make a new user, log in as that user and run Aperture. Again import a few images and see if the problem occurs.
Post the results back.
BTW what version of Aperture and the OS are you on?
Currently Being ModeratedAug 28, 2013 6:53 PM (in response to wyatt2)
I would trash your preferences file first. Directions on the Apple troubleshooting page. Can't provide a link right now.
UI problems are sometimes solved by trashing the prefs file.
(Sent from miPhone.)
Currently Being ModeratedAug 28, 2013 7:19 PM (in response to wyatt2)
Wyatt, do you have a raw fine tuning preset defined as camera default? Check the cogwheel in the Raw Fine Tuning brick in the Adjustments Panel, if a camera preset is set. Perhaps the preset has become corrupted.
If you recently installed a raw support update, have you tried to reprocess the raw? Photos > Reprocess original?
Currently Being ModeratedAug 29, 2013 12:28 AM (in response to wyatt2)
Addition: The combo D90 and 4.08 plus your hardware is the problem (look here)http://www.apertureforum.de/viewtopic.php?f=12&t=2371
Send feedback to Apple!
Currently Being ModeratedAug 29, 2013 4:54 AM (in response to norbertmuc)
I have the same problem. How do you revert to 4.07?
Never mind, found it. Remove
and install 4.07