-
All replies
-
Helpful answers
-
-
Sep 4, 2013 12:16 PM in response to Grubb12by OGELTHORPE,Have you checked with your schools IT department?
Ciao.
-
Sep 4, 2013 12:30 PM in response to Baby Boomer (USofA)by Grubb12,OS X 10.8.4
All I have done was go to my schools IT and they tried to connect it my clicking join other network and selecting WPA2 Enterprise I put in my school user name and password and it connected but for some reasion it kept searching for a signal and kicked me off within 30 seconds.
-
Sep 4, 2013 12:26 PM in response to OGELTHORPEby Grubb12,I have been to the IT department 4 times and they are all waying they do not know much about Macs...
-
Sep 4, 2013 12:28 PM in response to Grubb12by Baby Boomer (USofA),Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT4628 Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums.
-
Sep 4, 2013 12:31 PM in response to Baby Boomer (USofA)by Grubb12,I do not think I have a modem or router my dorm is just on campus so it is supposed to just connect to the campus wifi
-
-
Sep 4, 2013 7:00 PM in response to Grubb12by Linc Davis,Back up all data before making any changes.Step 1Take all the applicable steps in this support article.Step 2If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
If the application called "Bluetooth Setup Assistant" is running, quit it.
Step 4This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Reset the System Management Controller.
Step 5
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.
