If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.
Currently Being ModeratedSep 7, 2013 8:42 AM (in response to Diavonex)
Any idea of how my iPad would have a passcode that I didn't set? It isn't that I forget the passcode, it's that the iPad has never had one. I used it yesterday evening, no problem. iPad has been in my house this whole time. How would it get a passcode that I didn't set?
Currently Being ModeratedOct 29, 2013 11:12 AM (in response to ValentineLynx)
So the problem ended up being connected to the email address from my employer. They had somehow run an update that set a passcode on my iPad. The passcode ended up being the same code that I used to login to various systems at work.