8 Replies Latest reply: Sep 21, 2013 1:46 PM by Devin389
Devin389 Level 1 Level 1 (0 points)

My room recieves internet through the wall(ethernet) im not entirely sure what the service is.

 

-when i connect straight to the wall there is no problem with connection

-I have my airport extreme connected to ethernet plug and it is using DHCP in bridge mode.

 

The internet is faster when i connect through the extreme, however, there are two main problems that i cant figure out.

 

1. it consistantly "times out" it goes from working(green) to not working (amber) to blinking amber briefly back to green again every 10-30 minutes

making it impossible to seamlessly stream movies or play games.

2. when i come back home from school i cant find the device. it is green but even if i type join a network and type the credentials in i cant find it, forcing me to reboot it once or twice a day.

 

 

I am the only person using the wireless and only have had one device on it thusfar- macbook pro

 

What can i do to stop 1/2 from happening at all? thank you for your time.


Airport extreme
  • 1. Re: Airport extreme not working in bridge mode
    Tesserax Level 8 Level 8 (48,245 points)

    I have my airport extreme connected to ethernet plug and it is using DHCP in bridge mode.

    FYI ... your AirPort Extreme cannot be in bridge mode with DHCP enabled. Both NAT & DHCP are disable in bridge mode.

     

    Is your goal with the Extreme to provide a wireless / wired network for multiple computers at your dorm room?

  • 2. Re: Airport extreme not working in bridge mode
    Devin389 Level 1 Level 1 (0 points)

    I misspoke (sorry!) it is connecting using DHCP and the router mode is off (bridge mode) my goal here is to provide wireless to 1 laptop and one ipad in the room without it constantly going down.

  • 3. Re: Airport extreme not working in bridge mode
    Tesserax Level 8 Level 8 (48,245 points)

    Does your school require that your register the MAC address of the device that is connected to their network? If so, you would need to provide the hardware MAC address of your Extreme to them so that you can get connectivity.

  • 4. Re: Airport extreme not working in bridge mode
    Devin389 Level 1 Level 1 (0 points)

    I dont believe that they require this. i get connectivity it just drops every so often, also there are other people with routers in the building and they are just fine. This also happened with the router when i used it at home for the same purpose.

  • 5. Re: Airport extreme not working in bridge mode
    Tesserax Level 8 Level 8 (48,245 points)

    If this has happened with the Extreme at other locations then you basically have two choices: 1) Perform a "factory default" reset on it to see if this eliminates the issue, or 2) You have a faulty unit.

  • 6. Re: Airport extreme not working in bridge mode
    Devin389 Level 1 Level 1 (0 points)

    I performed a factory default reset on the device once already. Is it possible that changing the radio mode would do anything?/ is there anything else i could possibly try? thank you for your time though

  • 7. Re: Airport extreme not working in bridge mode
    Tesserax Level 8 Level 8 (48,245 points)

    Is it possible that changing the radio mode would do anything?

    Potentially if there is a wireless client that cannot support the radio mode selected it would not be able to connect. This would also cause them to drop-off if they were already connected.

     

    is there anything else i could possibly try?

    If all of your wireless clients are 802.11n compatible, you can try changing the Radio Mode to: 802.11n only (5 GHz) - 802.11n only (2.4 GHz). This would prevent any other clients from connecting.

     

    The other would be to be sure that you are using WPA2 Personal with a strong password.

     

    Finally, if there are numerous Wi-Fi networks operating nearby they may be fighting for the same radio channels that yours is broadcasting on. You can quickly determine this if you are using a Mac. What you want to know is which are operating with a very strong signal and what channel they are on. Then change your AirPort's channel from the default (Automatic) to a channel at least 3-5 channels away on the 2.4 GHz band. You can ignore the 5 GHz band for now.

  • 8. Re: Airport extreme not working in bridge mode
    Devin389 Level 1 Level 1 (0 points)

    Ok by changing the radio mode from 802.11 a/n- 802.11 b/g/n (automatic) to 802.11 a/n- 802.11 b/g and it has been working well ever since with no problems. not exactly sure why but that did it.